
Poplar
Paint-grade

Crafted in-house · service-driven · trade-proven
Solid hardwood surfaced, profiled, and staged on our own floor in Houston: dimension stock, shiplap, tongue and groove, paneling, and work surfaces.
Species
6+
Stocked and custom hardwoods
Made how
In-house
Surfaced and profiled at Tanner Rd
Construction
Solid
Hardwood stock, never veneer over core
Competing bids
Never
We supply shops; we do not bid against them
Pickup
Houston
NW Houston / Tanner Rd will-call
Product families
See the material, choose the profile, then quote the run with the shop that mills it in-house. Start with stocked hardwood where it fits, or move into a custom species, width, reveal, or matched profile when the job calls for it. If you are a millwork shop, the run is all we want: UWP does not bid casework and does not quote against the shops it supplies.

Dimension stock
Poplar, Red Oak, White Oak, and Maple on the shelf. Other species, widths, and profiles run to order.
View product
Wall & ceiling
Rabbeted nickel-gap shiplap in solid hardwood or paint-grade poplar, milled to your reveal.
View productProfiles & paneling
V-groove, square-edge, or beadboard for walls, ceilings, porch soffits, and built-ins.
View product
Feature walls
Tambour, cladding, and slat profiles in the species and rhythm the room calls for.
View product
Supply only
Unfinished wide plank flooring supplied for site finishing, plus custom species and widths.
View product
Work surfaces
Wide-plank, edge-grain, and end-grain work surfaces built from the same hardwood stock.
View productProfile details
These are the details the yard needs before quoting: profile, stock size, species, reveal, and whether the run starts from shelf stock or custom milling.

Dimension stock

Reveal profile
Wall & ceiling

Profile rhythm
Species guide
Hardwood millwork is visual by nature. A species band turns a flat service page into a material page and gives the custom-run conversation a clear starting point.

Paint-grade

Standard

Premium

Clean & pale

Dark & refined

Hardest
Start with stocked hardwoods or quote a custom run from the species list.
Choose size, width, profile, face reveal, and finished length requirements.
Surfaced, profiled, and staged on our own floor at Tanner Rd.
Will-call with the rest of the trim, stair, or cabinet package.

In-house milling
Surfaced, profiled, and staged at NW Houston / Tanner Rd.
1x2 through 1x12, plus custom widths and thicknesses.
Poplar, Red Oak, White Oak, Maple, Walnut, Hickory, and more.
Surfaced, profiled, and staged in-house at the Tanner Rd yard.
Stock where it makes sense, milled to order for everything else.
Special order
Prehung molded-panel interior doors, brought in to order alongside the trim and stair parts for the same job. Not milled at Tanner Rd — these are ordered in, so plan the lead time with your schedule. Spec the panel style, core, size, handing, and bore and send it over for a quote.
MOULDING · STAIR PARTS · MILLWORK
Send species, size, profile, total footage, and pickup timeline. UWP will confirm the right stock or mill-to-order path before production.
Milled to order means the material is run for your job rather than pulled from a shelf. A knife is ground or selected to the profile, stock is surfaced to your dimension in your species, and the run is cut to your footage. It buys exact profiles, non-standard sizes and species that nobody stocks, and it costs scheduling rather than money alone.
Read the answer →Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →S4S means surfaced four sides — both faces planed and both edges ripped straight and square, ready to use. S3S is surfaced three sides: both faces and one edge, with the second edge left rough so you can rip it to your own width. Rough-sawn is unsurfaced, sold by its full rough dimension, and needs a planer and a jointer before it is useful.
Read the answer →Shiplap is a rabbeted lap joint: each board overlaps its neighbour, so the seam can hold a deliberate gap — the reveal. Tongue and groove is a mechanical joint: a tongue on one edge seats in a groove on the other, locking boards flat and hiding the fastener. Shiplap is for a visible line. Tongue and groove is for a flat, continuous surface, especially overhead.
Read the answer →