
Hardwood S4S & S3S
Dimension Stock · Milled to Order · Houston, TX
Solid-hardwood dimension stock, surfaced and milled on our own floor. Common species and sizes ready off the shelf — anything else, milled to order in the species, size, or profile you name.
S4S and S3S dimension stock in Poplar, Red Oak, White Oak, and Hard Maple, milled in-house and kept on the shelf at Tanner Road. Built for cabinet shops, trim carpenters, and the trade.
Any other species, a custom thickness or length, or a profile milled to match — base, casing, and architectural moulding ground from your sample and run in your species. Quoted to order.
Four species, milled in-house.
Surfaced in-house through our NW Houston / Tanner Road yard; current quantities and will-call timing are confirmed at quote.
Paint-grade cabinet stock — pale, tight, takes finish clean
Warm reddish cast; bold, open grain
Warm-tan, olive cast — not pink
Pale, clean, even — modern and hard-wearing

Surfaced, racked, and held for will-call.
1×2 through 1×12.
| Nominal | Actual Size |
|---|---|
| 1 × 2 | 3/4" × 1-1/2" |
| 1 × 4 | 3/4" × 3-1/2" |
| 1 × 6 | 3/4" × 5-1/2" |
| 1 × 8 | 3/4" × 7-1/4" |
| 1 × 12 | 3/4" × 11-1/4" |
All stock is 3/4" nominal thickness, available in 7′–16′ lengths. Custom thicknesses, widths, and lengths milled on request.
S4S or S3S.
Planed smooth on all four faces with clean, square edges. Ready to use for trim, casing, stair work, and finished applications.
Planed on both faces and one edge, with the second edge left rough — so a cabinet shop can rip it to its own widths. Same species and thickness, your edge.
From rough-sawn to ready to use.
Every board starts rough off the mill and earns its finish one surface at a time. The more sides we surface, the less work — and equipment — left to you. We supply the finished end of that ladder, so you skip the planer, jointer, and table saw and go straight to your parts.
- RGH01Rough Sawn
Straight off the mill, no finished dimension. Cheapest board — and the most work. You bring the planer, jointer, and table saw.
- S2S02Surfaced Two Sides
Planed to a uniform thickness with two parallel faces; both edges still rough. Needs a jointer or rip jig to true an edge.
- SLR1E03Straight-Line Rip, One Edge
One edge straight-line ripped to give you a clean, dead-straight reference for the table saw.
- S3S04Surfaced Three Sides
Uniform thickness, one finished edge, one left rough — so a cabinet shop can rip to its own widths. Most cost-effective if you run a table saw.
We mill this - S4S05Surfaced Four Sides
Uniform thickness and width, two parallel faces, two square edges — run through our moulder for a precision finish. Go straight to cutting parts.
We mill this
Surfaced — smooth & squareLeft rough
Reading a lumber quote.
- BF
- Board Feet — Volume: 1″ × 12″ × 12″ = one board foot.
- LF
- Linear Feet — Length only — running feet of a board.
- KD
- Kiln Dried — Dried in a kiln to a stable moisture content.
- RL
- Random Lengths — A bundle of mixed lengths.
- RW
- Random Widths — A bundle of mixed widths.
- RWL
- Random Widths & Lengths — Mixed widths and lengths together.
Additional hardwood species.
Beyond the four core species, these are milled to order. Domestic and imported — name the species and we’ll confirm timing on the quote.
- Hickory
- Walnut
- Cherry
- Ash
- Alder
- Knotty Alder
- Cypress
- Beech
- White Oak — Rift & Quartered
- Jatoba
- African Mahogany

Bring us a profile — we’ll mill it to match.
Base, casing, and architectural moulding ground from your sample and run in solid hardwood — any of our species. Custom thicknesses, widths, and lengths milled to spec. Tell us what you need and we’ll quote it.
NW Houston · Tanner Rd Yard · Will-call & metro delivery
What builders actually ask.
Straight answers to the questions we field at the will-call counter — not a marketing FAQ.
What’s the difference between S4S and S3S?
Which species are in the core catalog?
What sizes and lengths can I get?
Can you mill a profile or match an existing moulding?
Do you show pricing here?
Pickup or delivery?
Looking for primed or paint-grade stock profiles? See our moulding catalog. Need a solid-hardwood work surface? We mill custom wood countertops from the same stock. New to the options? Compare our wood species.
Questions people ask before ordering
What is S4S lumber? How is it different from S3S and rough-sawn?
S4S means surfaced four sides — both faces planed and both edges ripped straight and square, ready to use. S3S is surfaced three sides: both faces and one edge, with the second edge left rough so you can rip it to your own width. Rough-sawn is unsurfaced, sold by its full rough dimension, and needs a planer and a jointer before it is useful.
Read the answer →Why is a 1×6 not actually six inches wide?
Nominal size is the rough dimension before surfacing; actual size is what you get after the planer. A 1×6 leaves the mill rough at roughly one inch by six and arrives S4S at 3/4 inch by 5-1/2 inch. Hardwood adds a second system: quarters, where 4/4 is one inch rough and 8/4 is two inches rough.
Read the answer →Paint-grade or stain-grade — how do I choose, and is poplar the right paint-grade wood?
Paint-grade stock is chosen for a flat, even surface that disappears under primer — grain, colour and small defects do not matter because nothing will show. Stain-grade stock is chosen for its face: colour, figure and grain continuity across a run. Poplar is the paint-grade default because it machines cleanly, holds a crisp profile edge and takes primer well.
Read the answer →What does "milled to order" actually mean, and what does the mill need from me?
Milled to order means the material is run for your job rather than pulled from a shelf. A knife is ground or selected to the profile, stock is surfaced to your dimension in your species, and the run is cut to your footage. It buys exact profiles, non-standard sizes and species that nobody stocks, and it costs scheduling rather than money alone.
Read the answer →

