Skip to main content
Unique Wood Products

What is S4S lumber? How is it different from S3S and rough-sawn?

S4S means surfaced four sides — both faces planed and both edges ripped straight and square, ready to use. S3S is surfaced three sides: both faces and one edge, with the second edge left rough so you can rip it to your own width. Rough-sawn is unsurfaced, sold by its full rough dimension, and needs a planer and a jointer before it is useful.

The short version

  • S4S — two faces planed, two edges straight and square. Ready for trim, casing and finished work.
  • S3S — two faces planed, one edge straight. Rip the second edge to your own width in your shop.
  • S2S — both faces planed, both edges still rough. You joint and rip everything.
  • Rough-sawn — nothing surfaced. Cheapest per board foot, most shop time, most waste.
  • The rule: the more sides the mill surfaces, the less material you own and the less machine time you spend. Pick by what your shop can do at the speed you need it.

The full answer

"Surfaced" means run through a planer or a moulder to a finished dimension. The S-number counts how many of the board’s four long sides got that treatment. It is a description of preparation, not of quality — an S4S board and a rough board can be cut from the same log at the same grade.

What each designation actually gives you

DesignationFaces surfacedEdges surfacedWhat you still have to do
S4SBothBothCut to length. That is all.
S3SBothOneRip the second edge to your width
S2SBothNeitherJoint one edge, then rip the other
Rough-sawnNeitherNeitherPlane both faces, joint an edge, rip to width

When S3S is the smarter buy

S3S is not a cheaper S4S — it is a different tool. You take it when you want to choose the width yourself. A cabinet shop breaking boards down into face frames and stiles does not care about a factory edge it is about to rip off anyway; it cares about having one true reference edge to run against the fence. That is exactly what S3S gives you: one straight edge, and the rest of the width still yours.

  • Take S4S when the board goes in more or less as-is: trim, casing, stair work, shelving, a finished application at a standard width.
  • Take S3S when you are ripping to non-standard widths anyway, or when you want the extra width to work around a defect.
  • Take rough only if you have a planer and a jointer, the time to use them, and somewhere to put the shavings. On small quantities the shop time costs more than the surfacing.

The nominal-size trap

Surfacing removes material, and the name does not change. A board called 1×6 is 3/4″ × 5-1/2″ once it is S4S. That is not shrinkage or a short-measure — the nominal name refers to the rough dimension before surfacing. It matters most in two places: board-foot pricing, which is normally figured on the rough dimension, and layout, where assuming 6″ across four boards leaves you 2″ short of the wall.

What UWP keeps surfaced and what is milled to order

  • On the shelf at Tanner Road: S4S and S3S dimension stock in poplar, red oak, white oak and hard maple, 3/4″ nominal, in 7′ to 16′ lengths.
  • Milled to order: any other species, a custom thickness, width or length, or a profile ground from your sample and run in your species.
  • Surfaced in-house. The planer and the moulder are on our own floor, which is why a custom thickness is a scheduling question rather than a sourcing one.
  • Current quantities and will-call timing are confirmed at quote — ask before you commit a cut list to a schedule.

One practical warning. S4S stock that has been sitting surfaced will still move a little after you cut it, because ripping a board releases internal stress and exposes fresh faces. On precision work, rip slightly oversize, let the parts sit overnight in the shop, then take them to final width. This is not a lumber defect; it is what wood does.

Related products at UWP

Related questions

Terms on this page

Still picking? Email us with the details — stair height, run depth, existing stair condition — and we’ll tell you what we’d actually spec.

Ask the Houston team

Published 2026-09-14