
Red Oak
Core catalogPairs with — Medium-tone floors with a warm, slightly pink-red cast — the default for red oak flooring in most American homes.
Configure it. Price it.
Download the shop drawing.
Six configurators for build-to-spec stair work — every tread cut to your exact rise and run in solid hardwood, milled at NW Houston / Tanner Rd. Each configuration returns an estimate, an ANSI A shop drawing and a DXF, ready for a submittal package. Looking for a stocked size?
Instant estimate
Whole-dollar planning price as you configure — species, size, edge, returns.
ANSI A shop drawing
Dimensioned plan, elevation, full-size nosing section, notes and a submittal review stamp.
DXF for the CAD set
Plan, returns and section as closed polylines in inches, on named layers.
One quote number
Estimate, drawing and DXF share a single reference. Nothing to reconcile.
Solid Hardwood · Houston-MilledFive configured species. Bullnose or eased edge on every line.
SKU 8070 / 8072Solid hardwood, 1" body, bullnose or eased edge. Houston-milled, five configured species.
SKU 8070 / 8072Trapezoidal solid hardwood tread for stair winders & turns. Front-edge length plus independent left/right depths.
SKU 8070 / 8072Edge-glued solid hardwood platform for L-shape and U-shape stair landings.
SKU 8071 / 8073Renovation overlay — L-shape underside lets a solid hardwood tread cap an existing stair without demolition.
SKU 8071 / 8073Renovation overlay for existing winders — pie geometry with the same L-shape underside as our retro-fit treads.
SKU 8071 / 8073Renovation overlay for stair landings — same L-shape profile, scaled up for L- and U-turn landings.

Crafted in-house · NW Houston / Tanner Rd
Explore photographs of UWP treads, curved details, and custom fabrication.
Every configuration generates an ANSI A sheet the way a millwork shop would draw it: zoned border, dimensioned plan and elevation, a full-size section through the nosing you can print at 100% as a template, general notes, a revision table and a submittal-review stamp. The DXF carries the same geometry into the architect's CAD set.


Six steps, forty seconds. Boards are planed flat, ripped into staves, then laid out by hand so the color and grain run true across the tread before anything is glued. The blank is edge-glued, milled with a full bullnose or a square edge to the size you configure, and sanded. Every custom tread is built this way at the Tanner Rd mill.
Edge-grain-up floating-stair treads in any species — Red Oak, White Oak, Maple, Walnut, or rift cuts for commercial work. Configure your spec and we'll quote it by hand.
Configure & quote →
Solid boards glued edge-to-edge for the depth and laminated for the thickness — a continuous wide-plank face instead of butcher block. Any species, milled to your exact spec.
Configure & quote →
On-site precision templating for curved, pie-shaped, and double-circle starts — guaranteed fit, zero guesswork. $125–$175 field-service fee.
A staircase reads best when the treads match the floor they meet. Species is chosen for tone, not just hardness — pick the one closest to your flooring and the stair disappears into the room instead of fighting it.
Images simulate a water-clear matte coat to show natural species color. UWP material ships unfinished; tone and figure vary by board.

Pairs with — Medium-tone floors with a warm, slightly pink-red cast — the default for red oak flooring in most American homes.

Pairs with — Lighter, cooler floors — white oak, natural, wire-brushed, and modern light finishes. Reads warm-tan, not pink.

Pairs with — Pale, clean, contemporary floors where an even, near-white tone is wanted.

Pairs with — Rustic and character-grade floors with high light-to-dark contrast.

Pairs with — Dark, rich floors and high-end interiors where a deep chocolate tone is the statement.
Send a sample of your floor — we'll species-match the run.
Red Oak and White Oak are core catalog species; the rest are made to order. Current material availability is confirmed on the quote. Janka hardness is listed for reference—every species here is solid, edge-glued, and refinishable.
Red Oak
White Oak
Hard Maple
Hickory
Walnut| Species | Hardness | Color & appearance | Grain & texture | Availability |
|---|---|---|---|---|
Red Oak | 1290 lbf | Light-to-medium brown with a reddish cast; stains slightly pink. | Bold, prominent grain lines with occasional swirl. | Core catalog |
White Oak | 1350 lbf | Light-to-medium brown with an olive, not pink, cast. | Medium-to-coarse, slightly open structure. | Core catalog |
Hard Maple | 1450 lbf | Creamy white to light reddish-brown; clean and modern. | Mostly straight, sometimes wavy; fine, even texture. | Made to order |
Hickory | 1820 lbf | Creamy lights against rich browns; rustic and striking. | Coarse, pronounced, high-contrast figure. | Made to order |
Walnut | 1010 lbf | Deep, luxurious chocolate tones; warm and refined. | Fine-to-medium grain, smooth and elegant. | Made to order |
These are the species that match or complement common hardwood flooring. Running the stair in the same species as the floor keeps grain and tone consistent, so the staircase reads as a deliberate extension of the room rather than a separate part.
Want the full picture — Janka hardness, tone, grain, and the species we source to order? Read the complete wood species guide →
No engineered cores, no veneer, no compromises — the reasons a solid UWP tread is still there decades after the trends move on.
Full-thickness hardwood the whole way through — not a veneer skin over a cheap core. What you sand into is more of the same wood.
Sand and recoat it many times over its life. A solid tread outlasts the carpet, the paint, and usually the renovation that put it in.
North American hardwood, milled in-house for a short supply chain and a solid-wood result without imported-veneer surprises.
Solid wood absorbs footfall and holds room temperature — none of the cold, hollow click of tile, stone, or hollow-core treads.