Thick Stair Treads
Solid hardwood treads for floating and open-riser stairs, 1¾" to 4" thick, in two constructions: butcher block with the edge grain up, or wide boards laminated face grain. 5 species on the cards, more to order. Milled to your spec at NW Houston / Tanner Rd and supplied unfinished.
- Custom quote
- ANSI A shop drawing
- DXF for CAD
- Unfinished only
Pick the species and the construction. Set thickness and width on the card.
10 treads · every one quoted by hand
Butcher Block · Edge grain upRed Oak Butcher Block Thick Tread
Solid Red Oak · Janka 1,290 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Butcher Block · Edge grain upWhite Oak Butcher Block Thick Tread
Solid White Oak · Janka 1,350 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Shown in White OakButcher Block · Edge grain upMaple Butcher Block Thick Tread
Solid Maple · Janka 1,450 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Butcher Block · Edge grain upWalnut Butcher Block Thick Tread
Solid Walnut · Janka 1,010 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Shown in White OakButcher Block · Edge grain upHickory Butcher Block Thick Tread
Solid Hickory · Janka 1,820 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Face Grain · LaminatedRed Oak Face Grain Thick Tread
Solid Red Oak · Janka 1,290 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Face Grain · LaminatedWhite Oak Face Grain Thick Tread
Solid White Oak · Janka 1,350 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Face Grain · LaminatedMaple Face Grain Thick Tread
Solid Maple · Janka 1,450 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Face Grain · LaminatedWalnut Face Grain Thick Tread
Solid Walnut · Janka 1,010 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.
Shown in White OakFace Grain · LaminatedHickory Face Grain Thick Tread
Solid Hickory · Janka 1,820 lbf · 11½" deep standard, 10–24" to order · square or ⅛" eased edge · unfinished
ThicknessWidthReturned endsConfigure & quoteOpens the configurator at 2" × 48" × 11½". Custom quote, no price online. Will-call from NW Houston / Tanner Rd.

Crafted in-house · NW Houston / Tanner Rd
Custom stair work, up close.
Explore photographs of UWP treads, curved details, and custom fabrication.
Butcher block or face grain?
| Butcher block · EGU | Face grain · laminated | |
|---|---|---|
| Walking surface | Narrow staves on edge — tight, straight, linear grain | Wide boards face up — continuous plank grain, cathedral figure |
| Cut end | A row of stave edges, all one piece | Horizontal laminations, visible as layers |
| Stability in Houston humidity | Highest — edge grain moves least across the depth | Good — wide faces move more than staves; the lamination locks it |
| Thickness | 2" to 4" | 1¾" to 3½" |
| Reads best on | Modern, commercial, mono-stringer and bracket stairs | Residential floating stairs where the plank grain is the feature |

A thick tread is the whole step.
No nosing, no riser
A 1" tread overhangs a riser. A thick tread sits on brackets or a mono stringer with nothing under its front edge, so the slab itself is the step. Every edge is square or eased at ⅛"; there is no bullnose to mill.
Thickness is structural
On a floating stair the tread spans between its supports. The stringer or bracket maker sets the minimum thickness for the span; the configurators take half-inch steps so you can match that number exactly.
Sized to the drawing
Length 36" to 72" standard, depth 10" to 24", any species on the cards or typed in. Each configuration hands out a spec sheet, an ANSI A shop drawing and a DXF with one quote number on all three.
- Thickness
- 1¾"–4"
- half-inch steps
- Depth
- 10"–24"
- 11½" standard
- Length
- 36"–72"
- longer by quote
- Finish
- None
- site finish by others
What builders actually ask.
Straight answers to the questions we field at the will-call counter — not a marketing FAQ.
Are these solid wood?
Do they come finished?
Is there a price online?
What thickness do I need for a floating stair?
Can I get a returned end on a thick tread?
Do you make thick landing platforms?
What is the standard depth?
Which species can I get?
Questions people ask before ordering
8070 vs. 8071 — which stair tread fits my existing staircase?
The 8070 is a full 1″ tread for new builds or full demos. The 8071 is a 5/8″ retro-fit overlay built to drop over carpeted stairs without demolition. The key reason: when you pull the carpet, the wood skirt board next to the staircase is roughly 11/16″ thick. The 8071 lands flush against it. The 8070 sits about 1/4″ proud and looks unfinished.
Read the answer →What’s the difference between a 1″ and a 1¾″ stair tread?
A 1″ stair tread is a retrofit cap that drops over an existing staircase — fast, affordable, and the right choice for most closed-stringer residential stairs. A 1¾″ thick tread is a structural-looking slab built for open, floating, or modern stairs where the tread itself is part of the architecture. Thickness changes the price, the install, and the entire look of the stair — not just the dimension.
Read the answer →Red oak vs. white oak for stair treads in Houston humidity
Both red oak and white oak make excellent stair treads in Houston — once acclimated, indoor performance is nearly identical. The real choice is look and budget. Red oak runs warm pink-brown with a busy grain at a lower cost; white oak runs golden-tan, takes modern stains more cleanly, and costs more. White oak also needs stainless fasteners — its tannins react with steel.
Read the answer →How much do hardwood stair treads cost?
Hardwood stair tread cost depends on three things: species, thickness, and width. A standard 1″ red oak tread is the most affordable; white oak, hickory, and hard maple step up; walnut and brazilian cherry are premium. Thick treads (1¾″ to 3½″) cost meaningfully more than 1″ treads in any species. Use the configurator for an exact number before you spec.
Read the answer →

