Skip to main content
Unique Wood Products

Stairs

Tread

The horizontal surface of a step — the part underfoot, and the part that wears.

A tread spans between stringers and carries the load of the person on it. In finished residential work it is usually solid hardwood between 1 inch and 1-1/4 inch thick, edge-glued from several boards so the width is stable. Thicker treads, from 1-3/4 inch up, are a separate program: they are laminated for the thickness rather than simply cut from a thicker board.

Depth is measured from the face of one riser to the face of the next, which is not the same as the overall width of the board. The nosing projects past that measurement, so a tread cut to 11-1/2 inch overall gives roughly a 10-1/2 inch run once the nosing is subtracted.

A tread with a finished end — the side visible on an open stair — needs a return, which is a separate mitred piece continuing the nosing profile around the corner.

On this site

See also

More in stairs

Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.