Milled in Houston · 8070 / 8072
Custom 1-inch
stair tread.
Solid hardwood, made to your length and depth. Choose a species, shape the edge, and specify the returns.

Make it yours.
Adjust the options to update the model and planning estimate. All dimensions are in inches.
Before you order
One solid tread.
The right details.
This configurator builds a straight, 1-inch-thick tread. Each selection describes the part; your installer confirms how it fits the complete stair.
Solid hardwood. Unfinished.
Edge-glued hardwood, supplied unfinished for your project’s finishing process. Natural grain and color vary; the on-screen wood is a reference.
Compare Red Oak & White OakLength × depth × 1 inch.
Length runs across the stair. Depth runs front to back, including the nose. The tool accepts half-inch increments; measure each step and confirm allowances with your installer.
See the measurement guideFinish the exposed ends.
Specify a left, right, or double return for ends that face the room. For a curved or irregular stair, discuss a template with UWP before choosing a standard rectangular tread.
Explore custom templating
Crafted in-house · NW Houston / Tanner Rd
Custom stair work, up close.
Explore photographs of UWP treads, curved details, and custom fabrication.
One solid board
from riser to riser.
A straight stair is the same rectangle over and over: 1" solid hardwood sitting on the riser, with the bullnose running 1-1/4" past the riser face. Here is how it sits, and the two numbers you need to order it.
Length, along the nose
Closed stair: measure skirt board to skirt board. Open side: measure to the outside face of the stringer and add a mitered returned end — the 1-1/4" piece that wraps the nose around the end.
Depth, nose to back
Riser face to riser face, plus the 1-1/4" nose. Most stairs land at 11-1/2", the stocked depth; deeper runs are cut to order.
Profile, nosing and returns
Choose bullnose (8070) or eased edge (8072), then set which edges carry the nose and which ends get a return. The price is the same either way.
Open side? Return the end
Where the stair has no wall on one side, the tread runs 1-1/4" past the stringer and a mitered returned end carries the nose around the corner — no raw end grain shows. Stocked 8070 returned treads are reversible.
Before you specify.
A few details to confirm before your configuration becomes an order.
What changes between the 8070 and 8072?
Which dimensions should I enter?
When do I need a return?
Is this tread suitable for a renovation?
What finish is included?
Does adding a tread to the quote list place an order?
A different stair detail?
Explore stock treads, landings, and other custom shapes.

