Skip to main content
Unique Wood Products

How much do hardwood stair treads cost?

Hardwood stair tread cost depends on three things: species, thickness, and width. A standard 1″ red oak tread is the most affordable; white oak, hickory, and hard maple step up; walnut and brazilian cherry are premium. Thick treads (1¾″ to 3½″) cost meaningfully more than 1″ treads in any species. Use the configurator for an exact number before you spec.

The short version

  • Species sets the floor. Red oak is the most affordable solid hardwood tread we stock. White oak, hickory, and hard maple sit in the middle. Walnut and brazilian cherry are the premium tier.
  • Thickness is the biggest multiplier. A custom thick tread (1¾″ to 3½″) costs several times what a standard 1″ tread in the same species costs — it’s a different program, not an upgrade.
  • Width matters less than people think at standard sizes (42″, 48″, 60″), but jumps once you cross into 72″ or 96″ red oak.
  • Use the configurator for an exact, current quote: instant pricing on every species and profile, no email required.

The full answer

Hardwood stair treads from UWP are quoted by species × thickness × width × profile × finish. There is no single dollar figure that covers “a stair tread” — but there is an honest breakdown of what drives the number up and down, and what a typical project ends up paying.

What drives the price

  • Species. Red oak is the most affordable solid hardwood we stock — there’s plenty of it in the North American supply chain, and it’s easy to mill. White oak runs a meaningful step up (driven by global supply pressure — see our White Oak 20/20 policy). Hickory and hard maple sit alongside white oak. Walnut and brazilian cherry are the premium tier, both because the raw material is expensive and because the species are harder to source in long, clean boards.
  • Thickness. This is the biggest single multiplier. A standard 1″ tread (our 8070 / 8072 line) is the baseline. A 1¾″ to 3½″ custom thick tread — either EGU edge-grain butcher block or laminated face-grain plank — costs several times more, because the labor, the material yield, and the construction program are different.
  • Width and length. Stocked widths are 42″, 48″, and 60″ in all species. Red oak runs to 96″. The 42″-to-60″ range prices linearly; the jump to 72″ or 96″ red oak is bigger because the boards required are harder to source.
  • Profile. A stocked bullnose or square edge prices the same. Returned ends (for stairs with open ends) and custom profiles add labor; curved or templated treads are quoted per-job.
  • Finish. Unfinished is the baseline — almost all our treads ship this way. In-house finishing adds material, labor, and cure time. Most contractors finish on-site to avoid scratches during install.

Where the savings actually live

The biggest single move you can make on stair-tread cost is stay with Red Oak in catalog widths. Red Oak 8070 bullnose treads in standard widths are generally the most economical solid-hardwood starting point. UWP confirms the exact SKU, quantity, and current material cost on the quote.

The second-biggest move: stay with the 1″ program, not the thick-tread program. A 1″ tread is finish carpentry — it drops onto an existing stair structure. A 1¾″+ tread is a full-build project that requires re-framing the stair. The price difference reflects that.

The third move: stay with stocked profiles. Bullnose (8070) and square / eased (8072) are stocked. Anything else — a custom nose, a non-standard miter, a one-off radius — is a custom run.

Where it’s worth paying more

Match your floor. If your home has white oak floors, a red oak tread will read as a mismatch the moment you stand at the top of the stairs. Match the species. The cost delta is real but the visual cost of mismatching is worse.

Open-rise or modern designs. A thick tread isn’t an upgrade to a closed-stringer stair — it’s a different design. If the architecture calls for it, nothing else will look right. Don’t spec it casually; spec it deliberately.

Trade pricing. If you’re a contractor, builder, or remodeler, open a cash account to get trade pricing on every order. The savings on a multi-tread project are meaningful.

How to get an exact number

The fastest path to a real number for your project is the Custom Stair Tread Configurator. Pick the species, the thickness, the width, the profile, the count — it returns the current price instantly, no email or callback required. For thick treads, use the Custom EGU or Custom Face-Grain configurator. For a full house quote with mouldings included, ask your sales rep — pricing is the same; the bundled quote is faster.

Related products at UWP

Related questions

Terms on this page

Still picking? Email us with the details — stair height, run depth, existing stair condition — and we’ll tell you what we’d actually spec.

Ask the Houston team

Published 2026-05-27