Skip to main content
Unique Wood Products

Red Oak — hardwood for stair treads and millwork

Warm tan to reddish brown. A familiar hardwood with strong everyday availability.

Red Oak plank, clear matte finish
Janka hardnessHard

1,290 lbf

Comfortably past what residential traffic asks of a floor or a tread. The baseline every other species here gets measured against.

Cost indexEveryday

100 · red oak = 100

Computed from the wholesale price schedule for the 1″ 8070 tread program.

Availability

Core catalog · availability confirmed at quote

Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.

What we mill it into

Character

Open grain with clear movement.

Comfortably past what residential traffic asks of a floor or a tread. The baseline every other species here gets measured against.

Best for

Stain-grade stair parts, rails, treads, and trim.

How Red Oak behaves in service

Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.

Tangential shrinkageModerate movement

8.6%

Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.

Radial shrinkage

4.0%

Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.

Basis

USDA Wood Handbook

Published laboratory constants for the species, not a UWP measurement.

Finishing

The reference stain species: open pores take colour evenly and every off-the-shelf stain is formulated against it. Reads pink under a clear coat; a warm stain settles it.

Machining and fastening

Machines cleanly, turns well for balusters and newels, and holds nails and screws. The open grain wants a sealer before a filled finish.

Closest in hardness

The three species nearest Red Oak on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.