Beech — hardwood for stair treads and millwork
Pale pink-tan. A quiet hardwood option with a consistent face.

1,300 lbf
Oak-class hardness that machines exceptionally clean. It moves more than oak with humidity, so keep it inside.
118 · red oak = 100
Indicative of lumber market position — not a UWP quote.
Milled to order · lead time confirmed at quote
Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.
What we mill it into
Character
Fine, even, and subtle.
Oak-class hardness that machines exceptionally clean. It moves more than oak with humidity, so keep it inside.
Best for
Clean trim, panels, and smooth millwork.
How Beech behaves in service
Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.
11.9%
Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.
5.5%
Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.
USDA Wood Handbook
Published laboratory constants for the species, not a UWP measurement.
Finishing
A pale, even blonde that stains evenly and takes paint well. Little figure, which is why it is chosen for a quiet finish.
Machining and fastening
Turns and machines like hard maple and steams and bends better than any other domestic. It moves more than almost any species the mill runs, so it is kept for interior work in conditioned space.
Closest in hardness
The three species nearest Beech on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.

