Skip to main content
Unique Wood Products

Wood species cheat sheet — red oak, white oak, hickory, hard maple, walnut, brazilian cherry

UWP mills six hardwood species: red oak, white oak, hickory, hard maple, walnut, and brazilian cherry. Red oak is the affordable warm baseline; white oak runs golden-tan and takes modern stains cleanly; hickory shows the strongest grain contrast; hard maple is the tightest, lightest grain; walnut is rich chocolate; brazilian cherry is the hardest and reddest. Pick on look first, hardness second.

The short version

  • Red oak — pink-brown, busy cathedral grain, lowest cost. The American baseline.
  • White oak — golden-tan, quieter grain, takes modern stains cleanly. Watch the fasteners (tannins react with steel).
  • Hickory — dramatic light-to-dark grain swings. The most visually active species we stock.
  • Hard maple — pale cream, tight uniform grain, very hard. The clean modern look.
  • Walnut — deep chocolate brown, soft warm figure. The luxe option.
  • Brazilian cherry — reddish-brown that darkens to deep red with age and light. Hardest of the six.

The full answer

UWP stocks six hardwood species across stair treads, mouldings, and countertops. Below is the honest cheat sheet — what each one looks like, how hard it is, how it takes stain, what it costs, and where it actually fits. Janka hardness (a standard measure of dent resistance, in pounds-force) is included to make the durability comparison real.

At a glance

SpeciesColorJankaStainCost tier
Red oakPink to warm brown1290Takes warm stains well; blotchy under modern graysMost affordable
White oakGolden-tan to grey-brown1350Takes any stain cleanly — especially modernStep up
HickoryCream to deep brown (high contrast)1820Takes stain but the grain still dominatesMid
Hard maplePale cream, near-white1450Notoriously blotchy under stain — best clear-coatedMid
WalnutDeep chocolate brown1010Rarely stained — natural color is the pointPremium
Brazilian cherryReddish-brown, darkens to deep red2350Color shifts dramatically with light — stain is fighting the woodPremium

Red oak

The American baseline. Pink-to-warm-brown heartwood with a strong cathedral grain that reads as “traditional American hardwood.” Open pore structure — you can see the pores along the grain — which makes it take warm browns and ambers beautifully but blotchy under modern grays and fumed finishes.

  • Look: warm, traditional, busy. The grain is doing the talking.
  • Hardness: Janka 1290 — plenty for residential traffic.
  • Cost: the most affordable solid hardwood we stock. The honest answer when budget is the deciding factor.
  • Best for: matching existing red oak floors, traditional and transitional homes, builder spec projects, any project where the look works and cost matters.

White oak

The modern oak. Golden-tan to grey-brown with a quieter, tighter grain than red oak. Pores are plugged with tyloses (the same trait used in wine barrels), which gives it slightly better dimensional stability and outright better water resistance. Takes any stain cleanly — fumed, weathered, natural, modern gray, traditional brown. Stainable is the word.

  • Look: quieter than red oak, more modern, more even color.
  • Hardness: Janka 1350.
  • Cost: meaningful step up from red oak — partly global supply pressure (see White Oak 20/20 policy).
  • Best for: modern, transitional, contemporary, and luxe-traditional homes. Any project specifying modern stains.
  • Watch out: tannins react with iron in moisture, leaving black stains. Use stainless or coated fasteners — never standard steel.

Hickory

The visually loudest species we stock. Cream-colored sapwood and dark-brown heartwood in the same board — the contrast can be dramatic, especially on character-grade material. Very hard (Janka 1820), which makes it a popular choice for high-traffic floors and treads where dent resistance is a real concern. The grain pattern is the point; don’t expect a uniform look.

  • Look: rustic, energetic, lots of color movement. Reads as “real wood” immediately.
  • Hardness: Janka 1820 — among the hardest domestic hardwoods.
  • Cost: mid-range, in our pricing tier.
  • Best for: craftsman, lodge, mountain-modern, rustic-modern designs. High-traffic projects. Stains will not hide the color variation.

Hard maple

The clean canvas. Very pale cream-to-white with a tight, uniform grain that reads almost neutral. The Janka is lower than hickory but still very hard. Hard maple is notoriously blotchy under stain — the grain absorbs pigment unevenly — so the standard treatment is a clear topcoat over the natural color. Used in basketball courts, butcher blocks, and any project that wants the wood to read clean and quiet.

  • Look: pale, clean, modern, near-uniform.
  • Hardness: Janka 1450 — good for traffic.
  • Cost: mid-range.
  • Best for: modern minimalist projects, butcher-block countertops, any design where the wood should disappear into a neutral.
  • Watch out: plan on clear-finishing, not staining. Stained maple usually looks blotchy.

Walnut

The luxe option. Deep chocolate-brown heartwood with a soft, warm figure that reads as immediately premium. The Janka (1010) is lower than oak — walnut dents more easily — but the look has no real substitute. Almost never stained; the natural color is the entire reason to spec it. Color slightly lightens with sun exposure over time (the opposite direction from brazilian cherry).

  • Look: deep, warm, sophisticated. The wood you see on high-end furniture and millwork.
  • Hardness: Janka 1010 — softer than oak. Dents more.
  • Cost: premium tier.
  • Best for: statement stairs, accent treads, focal-point countertops, high-end residential. Anywhere the look is the point.

Brazilian cherry (jatoba)

The hardest of the six. Janka 2350 — roughly double red oak. Reddish-brown when freshly milled, darkening dramatically to a deep blood-red with sun exposure and time. The color shift is a feature, not a bug — but it does mean that any installed brazilian cherry surface will look different in a year. Plan for it.

  • Look: rich, red, traditional-meets-tropical. Distinctive on sight.
  • Hardness: Janka 2350 — outstanding dent resistance.
  • Cost: premium tier; supply varies.
  • Best for: traditional and tropical-leaning designs, high-traffic stairs, projects where the deep red is a deliberate choice.
  • Watch out: photosensitive color shift. Don’t cover part of a finished tread with a rug for a year — the rug shadow will be visible when you move it.

How to pick

If your priority is…Pick this
Lowest cost, solid hardwoodRed oak
Modern stains, gray finishes, natural lookWhite oak
Maximum dent resistanceBrazilian cherry (or hickory)
Rustic / character grainHickory
Clean modern neutralHard maple
Luxe, statement, deep colorWalnut
Matching existing floor or trimMatch the species exactly — don’t mix

All six stocked at the Tanner Rd yard for stair treads. Mouldings run in the same species on order. Countertops are quote-only across all six. Use the configurator on any product page to lock species and see real pricing for your project.

Related products at UWP

Related questions

Terms on this page

Still picking? Email us with the details — stair height, run depth, existing stair condition — and we’ll tell you what we’d actually spec.

Ask the Houston team

Published 2026-05-27