Ash — hardwood for stair treads and millwork
Light blonde to tan. A useful option when a light hardwood needs visible grain.

1,320 lbf
Oak-class hardness behind a much lighter face. It takes the beating stair parts and handrail get.
112 · red oak = 100
Indicative of lumber market position — not a UWP quote.
Milled to order · lead time confirmed at quote
Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.
What we mill it into
Character
Lively grain with open structure.
Oak-class hardness behind a much lighter face. It takes the beating stair parts and handrail get.
Best for
Bright stain-grade work and durable trim.
How Ash behaves in service
Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.
7.8%
Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.
4.9%
Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.
USDA Wood Handbook
Published laboratory constants for the species, not a UWP measurement.
Finishing
An open-grained blonde that takes stain like oak but without the pink; the current substitute where a pale oak look is wanted at a lower cost.
Machining and fastening
Tough and elastic, it turns and bends well and holds a fastener. Machines like red oak with a little more tear-out on the flat.
Closest in hardness
The three species nearest Ash on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.

