Skip to main content
Unique Wood Products

White Oak — hardwood for stair treads and millwork

Light tan to honey brown. A strong choice for restrained modern finishes.

White Oak plank, clear matte finish
Janka hardnessHard

1,350 lbf

A shade over red oak. In a wet room the closed, tyloses-filled grain matters more than the extra 60 lbf does.

Cost indexPremium

150 · red oak = 100

Computed from the wholesale price schedule for the 1″ 8070 tread program.

Availability

Core catalog · availability confirmed at quote

Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.

What we mill it into

Character

Firm, clean, architectural look.

A shade over red oak. In a wet room the closed, tyloses-filled grain matters more than the extra 60 lbf does.

Best for

Premium stain-grade trim, stair parts, and millwork.

How White Oak behaves in service

Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.

Tangential shrinkageHigh movement

10.5%

Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.

Radial shrinkage

5.6%

Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.

Basis

USDA Wood Handbook

Published laboratory constants for the species, not a UWP measurement.

Finishing

Takes the pale, grey and natural finishes the market wants and blotches less than red oak under them. High in tannin: it turns black where iron and water meet it, so fasteners are pre-drilled and water-based finishes are tested first.

Machining and fastening

Harder on knives than red oak and more prone to tear-out on the quarter, but it turns and mortises well. Rift and quartered stock is the most stable board the mill runs.

Closest in hardness

The three species nearest White Oak on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.