Moulding family
Crown Moulding
423 profiles · 5 stocked at Tanner Rd · 408 milled to order
Crown is the one moulding that is installed at an angle, which is why it is the one that goes wrong most often. Every section here carries its spring angle — 38° or 45° for the common patterns, others where the profile calls for it — because that number, not the face width, is what sets the saw. A crown with a 4-1/2″ face at 38° projects and drops differently from the same face at 45°, and a cope that fits one will gap on the other.
Size follows ceiling height. Under 8 ft the room wants 2-1/2″ to 3-1/2″; a 9 ft ceiling carries 4″ to 5-1/4″ comfortably; 10 ft and up takes 5-1/2″ and beyond, or a built-up assembly of crown over bed mould over a flat frieze. The library runs to 408 profiles across five styles. The stocked patterns are primed pine and a few hardwood coves for the paint-and-stain jobs that cannot wait.
Narrow the 423 profiles by style (6), face height (22), ceiling height below, or use the catalogue's finder for a SKU.

Crown Moulding
9/16" × 5-1/4"
In stockView profile →
Crown Moulding
9/16" × 4-1/4"
In stockView profile →
Crown Moulding
9/16" × 3-5/8"
In stockView profile →
Crown Moulding
9/16" × 3-1/4"
In stockView profile →
Crown Moulding
9/16" × 2-3/4"
In stockView profile →Crown Moulding
11/16" × 5-5/8"
Milled to orderView profile →
Crown Moulding
1-3/32" × 6-5/16"
Milled to orderView profile →
Crown Moulding
1-7/16" × 5-1/4"
Milled to orderView profile →
Crown Moulding
9/16" × 4-9/16"
Milled to orderView profile →Crown Moulding
9/16" × 5-1/4"
Milled to orderView profile →Crown Moulding
11/16" × 4-1/4"
Milled to orderView profile →Crown Moulding
1-1/16" × 6-15/16"
Milled to orderView profile →Crown Moulding
1" × 5-7/8"
Milled to orderView profile →Crown Moulding
5-1/4" × 5-1/4" projection
Milled to orderView profile →Crown Moulding
5-1/16" × 4-15/16" projection
Milled to orderView profile →
Crown
1-3/4" × 0.453"
Milled to orderView profile →
Crown
1-3/4" × 0.585"
Milled to orderView profile →
Crown
2" × 0.827"
Milled to orderView profile →
Crown
2" × 0.669"
Milled to orderView profile →
Crown
2" × 0.988"
Milled to orderView profile →
Crown
2" × 0.865"
Milled to orderView profile →
Crown
2-1/2" × 0.836"
Milled to orderView profile →
Crown
3-1/4" × 1.89"
Milled to orderView profile →
Crown
2-1/2" × 0.832"
Milled to orderView profile →
Crown
3-1/4" × 13/16"
Milled to orderView profile →
Crown
2-1/2" × 0.61"
Milled to orderView profile →
Crown
3" × 0.826"
Milled to orderView profile →
Crown
3-3/4" × 0.82"
Milled to orderView profile →
Crown
2-1/2" × 0.776"
Milled to orderView profile →
Crown
2-1/2" × 0.912"
Milled to orderView profile →
Crown
2-3/4" × 0.952"
Milled to orderView profile →
Crown
3-1/2" × 0.825"
Milled to orderView profile →
Crown
3" × 0.788"
Milled to orderView profile →
Crown
2-3/4" × 0.821"
Milled to orderView profile →
Crown
2-1/2" × 0.974"
Milled to orderView profile →
Crown
3" × 0.61"
Milled to orderView profile →
Crown
3" × 0.643"
Milled to orderView profile →
Crown
3-1/4" × 0.672"
Milled to orderView profile →
Crown
4-1/2" × 0.973"
Milled to orderView profile →
Crown
3-1/2" × 0.93"
Milled to orderView profile →
Crown
3" × 0.799"
Milled to orderView profile →
Crown
3" × 0.821"
Milled to orderView profile →
Crown
3-1/4" × 0.612"
Milled to orderView profile →
Crown
3-1/2" × 0.593"
Milled to orderView profile →
Crown
3-1/2" × 0.783"
Milled to orderView profile →
Crown
4-1/2" × 0.825"
Milled to orderView profile →
Crown
3-3/4" × 0.865"
Milled to orderView profile →
Crown
3-1/2" × 0.729"
Milled to orderView profile →
Crown
3-3/4" × 0.8"
Milled to orderView profile →
Crown
3-3/4" × 0.795"
Milled to orderView profile →
Crown
3-3/4" × 1-1/8"
Milled to orderView profile →
Crown
3-3/4" × 13/16"
Milled to orderView profile →
Crown
3-1/2" × 0.585"
Milled to orderView profile →
Crown
3-1/4" × 0.926"
Milled to orderView profile →
Crown
4" × 0.795"
Milled to orderView profile →
Crown
3-3/4" × 0.802"
Milled to orderView profile →
Crown
3-1/2" × 0.765"
Milled to orderView profile →
Crown
3-1/2" × 1.327"
Milled to orderView profile →
Crown
3-3/4" × 0.764"
Milled to orderView profile →
Crown
3-1/2" × 0.729"
Milled to orderView profile →
Crown
3-1/4" × 1-1/16"
Milled to orderView profile →
Crown
3-3/4" × 0.841"
Milled to orderView profile →
Crown
4" × 0.948"
Milled to orderView profile →
Crown
4" × 0.824"
Milled to orderView profile →
Crown
3-3/4" × 0.617"
Milled to orderView profile →
Crown
3-3/4" × 0.72"
Milled to orderView profile →
Crown
3-3/4" × 0.829"
Milled to orderView profile →
Crown
3-1/4" × 0.953"
Milled to orderView profile →
Crown
4-1/4" × 0.784"
Milled to orderView profile →
Crown
4-1/4" × 0.885"
Milled to orderView profile →
Crown
3-1/2" × 1.038"
Milled to orderView profile →
Crown
4-1/4" × 3/4"
Milled to orderView profile →
Crown
4-1/4" × 0.755"
Milled to orderView profile →
Crown
4-1/2" × 0.796"
Milled to orderView profile →
Crown
4-1/2" × 0.733"
Milled to orderView profile →
Crown
4-1/2" × 0.844"
Milled to orderView profile →
Crown
3-3/4" × 0.865"
Milled to orderView profile →
Crown
3-3/4" × 0.773"
Milled to orderView profile →
Crown
3-3/4" × 0.758"
Milled to orderView profile →
Crown
5" × 1.053"
Milled to orderView profile →
Crown
4-3/4" × 0.802"
Milled to orderView profile →
Crown
4-1/2" × 0.9"
Milled to orderView profile →
Crown
4-1/4" × 1.019"
Milled to orderView profile →
Crown
4-3/4" × 0.894"
Milled to orderView profile →
Crown
4-3/4" × 1.097"
Milled to orderView profile →
Crown
4-3/4" × 0.71"
Milled to orderView profile →
Crown
4-3/4" × 0.792"
Milled to orderView profile →
Crown
4-3/4" × 0.757"
Milled to orderView profile →
Crown
4-1/4" × 0.835"
Milled to orderView profile →
Crown
4-3/4" × 1.078"
Milled to orderView profile →
Crown
4-1/4" × 9/16"
Milled to orderView profile →
Crown
4-1/2" × 0.776"
Milled to orderView profile →
Crown
4-1/2" × 0.924"
Milled to orderView profile →
Crown
4" × 0.704"
Milled to orderView profile →
Crown
4-1/2" × 0.723"
Milled to orderView profile →
Crown
5" × 0.883"
Milled to orderView profile →
Crown
5-1/2" × 0.759"
Milled to orderView profile →
Crown
5-1/4" × 0.76"
Milled to orderView profile →
Crown
5-1/2" × 1.569"
Milled to orderView profile →
Crown
5-1/2" × 0.666"
Milled to orderView profile →
Crown
5-1/2" × 1.024"
Milled to orderView profile →
Crown
4-1/4" × 0.819"
Milled to orderView profile →
Crown
4-3/4" × 0.825"
Milled to orderView profile →
Crown
5-1/2" × 1.229"
Milled to orderView profile →
Crown
5-1/4" × 0.724"
Milled to orderView profile →
Crown
4" × 15/16"
Milled to orderView profile →
Crown
5-1/2" × 0.838"
Milled to orderView profile →
Crown
5-1/2" × 1.076"
Milled to orderView profile →
Crown
5-1/2" × 0.917"
Milled to orderView profile →
Crown
4-3/4" × 0.67"
Milled to orderView profile →
Crown
4-3/4" × 0.782"
Milled to orderView profile →
Crown
5-3/4" × 1.162"
Milled to orderView profile →
Crown
6" × 0.85"
Milled to orderView profile →
Crown
5-3/4" × 0.774"
Milled to orderView profile →
Crown
5-1/2" × 1.284"
Milled to orderView profile →
Crown
5-1/4" × 0.893"
Milled to orderView profile →
Crown
5-1/2" × 0.696"
Milled to orderView profile →
Crown
5-3/4" × 0.758"
Milled to orderView profile →
Crown
6" × 0.783"
Milled to orderView profile →
Crown
5-3/4" × 1.281"
Milled to orderView profile →
Crown
5" × 0.783"
Milled to orderView profile →
Crown
5-3/4" × 1.292"
Milled to orderView profile →
Crown
5-3/4" × 0.758"
Milled to orderView profile →
Crown
5-1/2" × 0.887"
Milled to orderView profile →
Crown
5" × 0.887"
Milled to orderView profile →
Crown
6" × 1.304"
Milled to orderView profile →
Crown
6" × 1.153"
Milled to orderView profile →
Crown
5-3/4" × 0.819"
Milled to orderView profile →
Crown
5" × 0.818"
Milled to orderView profile →
Crown
6" × 0.764"
Milled to orderView profile →
Crown
6-1/4" × 1-1/2"
Milled to orderView profile →
Crown
6-1/4" × 0.76"
Milled to orderView profile →
Crown
6-1/2" × 1.107"
Milled to orderView profile →
Crown
6-1/2" × 0.844"
Milled to orderView profile →
Crown
6-1/2" × 1.141"
Milled to orderView profile →
Crown
7-1/4" × 1.524"
Milled to orderView profile →
Crown
6-1/2" × 0.777"
Milled to orderView profile →
Crown
6-3/4" × 0.914"
Milled to orderView profile →
Crown
6-3/4" × 1-1/8"
Milled to orderView profile →
Crown
6-3/4" × 0.763"
Milled to orderView profile →
Crown
7" × 1-3/16"
Milled to orderView profile →
Crown
7-1/4" × 1-5/16"
Milled to orderView profile →
Crown
7" × 0.91"
Milled to orderView profile →
Crown
7-1/4" × 0.892"
Milled to orderView profile →
Crown
7-1/4" × 0.848"
Milled to orderView profile →
Crown
6" × 0.837"
Milled to orderView profile →
Crown
7-1/4" × 0.741"
Milled to orderView profile →
Crown
7-1/4" × 1.526"
Milled to orderView profile →
Crown
7-1/2" × 7/8"
Milled to orderView profile →
Crown
7-1/2" × 0.889"
Milled to orderView profile →
Crown
7-1/2" × 1-1/8"
Milled to orderView profile →
Crown
7-1/4" × 0.825"
Milled to orderView profile →
Crown
7-1/4" × 1.132"
Milled to orderView profile →
Crown
7-1/2" × 1.171"
Milled to orderView profile →
Crown
7-3/4" × 1.032"
Milled to orderView profile →
Crown
7-3/4" × 1.038"
Milled to orderView profile →
Crown
7-3/4" × 0.926"
Milled to orderView profile →
Crown
8" × 1.488"
Milled to orderView profile →
Crown
8" × 0.842"
Milled to orderView profile →
Crown
8" × 1-3/16"
Milled to orderView profile →
Crown
8-1/4" × 1.415"
Milled to orderView profile →
Crown
8-1/2" × 1.023"
Milled to orderView profile →
Crown
8-1/2" × 1.085"
Milled to orderView profile →
Crown
10" × 1.671"
Milled to orderView profile →
Crown
9" × 1.391"
Milled to orderView profile →
Crown
11" × 1.785"
Milled to orderView profile →
Crown
9-1/4" × 1.148"
Milled to orderView profile →
Crown
3" × 0.835"
Milled to orderView profile →
Crown
2-1/4" × 0.794"
Milled to orderView profile →
Crown
3" × 0.64"
Milled to orderView profile →
Crown
5-1/2" × 1.091"
Milled to orderView profile →
Crown
6" × 0.913"
Milled to orderView profile →
Crown
5-3/4" × 0.831"
Milled to orderView profile →
Crown
7-1/4" × 0.906"
Milled to orderView profile →
Crown
5-3/4" × 0.783"
Milled to orderView profile →
Crown
8" × 1.28"
Milled to orderView profile →
Crown
3" × 0.818"
Milled to orderView profile →
Crown
6-3/4" × 1.019"
Milled to orderView profile →
Crown
8-1/2" × 0.901"
Milled to orderView profile →
Crown
8-3/4" × 1.823"
Milled to orderView profile →
Crown
5-1/4" × 0.85"
Milled to orderView profile →
Crown
4-1/2" × 13/16"
Milled to orderView profile →
Crown
6-3/4" × 1.146"
Milled to orderView profile →
Crown
7" × 0.789"
Milled to orderView profile →
Crown
7-1/4" × 1.028"
Milled to orderView profile →
Crown
4" × 1.157"
Milled to orderView profile →
Crown
3-1/4" × 0.829"
Milled to orderView profile →
Crown
5-3/4" × 1.334"
Milled to orderView profile →
Crown
2" × 0.828"
Milled to orderView profile →
Crown
4-1/4" × 0.987"
Milled to orderView profile →
Crown
4-1/4" × 0.797"
Milled to orderView profile →
Crown
3-1/2" × 13/16"
Milled to orderView profile →
Crown
2" × 0.841"
Milled to orderView profile →
Crown
4-3/4" × 0.847"
Milled to orderView profile →
Crown
6-3/4" × 0.826"
Milled to orderView profile →
Crown
7" × 2-11/16"
Milled to orderView profile →
Crown
6" × 0.774"
Milled to orderView profile →
Crown
3-3/4" × 1.084"
Milled to orderView profile →
Crown
1-1/4" × 0.393"
Milled to orderView profile →
Crown
3-1/2" × 0.783"
Milled to orderView profile →
Crown
2-3/4" × 1.737"
Milled to orderView profile →
Crown
5-1/2" × 1-7/16"
Milled to orderView profile →
Crown
7-1/4" × 1.261"
Milled to orderView profile →
Crown
4-1/4" × 1.03"
Milled to orderView profile →
Crown
4-3/4" × 0.858"
Milled to orderView profile →
Crown
5-3/4" × 0.784"
Milled to orderView profile →
Crown
5-1/4" × 0.575"
Milled to orderView profile →
Crown
5-3/4" × 0.695"
Milled to orderView profile →
Crown
2-1/2" × 0.764"
Milled to orderView profile →
Crown
4-1/2" × 7/8"
Milled to orderView profile →
Crown
2-3/4" × 0.919"
Milled to orderView profile →
Crown
5" × 1.398"
Milled to orderView profile →
Crown
3-1/4" × 1.277"
Milled to orderView profile →
Crown
2-1/2" × 5/8"
Milled to orderView profile →
Crown
3-1/2" × 0.843"
Milled to orderView profile →
Crown
4-1/2" × 0.756"
Milled to orderView profile →
Crown
5-3/4" × 0.784"
Milled to orderView profile →
Crown
6-1/2" × 1"
Milled to orderView profile →
Crown
6-1/2" × 0.829"
Milled to orderView profile →
Crown
6-1/2" × 1.158"
Milled to orderView profile →
Crown
6" × 1.032"
Milled to orderView profile →
Crown
7-3/4" × 1.339"
Milled to orderView profile →
Crown
4-1/2" × 1-3/16"
Milled to orderView profile →
Crown
6-1/4" × 1.132"
Milled to orderView profile →
Crown
4-1/4" × 0.944"
Milled to orderView profile →
Crown
7-1/4" × 1.167"
Milled to orderView profile →
Crown
4-1/4" × 0.828"
Milled to orderView profile →
Crown
3-3/4" × 0.763"
Milled to orderView profile →
Crown
3-3/4" × 0.786"
Milled to orderView profile →
Crown
5-1/4" × 0.722"
Milled to orderView profile →
Crown
1-3/4" × 0.414"
Milled to orderView profile →
Crown
4-3/4" × 0.931"
Milled to orderView profile →
Crown
4-1/4" × 1.049"
Milled to orderView profile →
Crown
7" × 1.108"
Milled to orderView profile →
Crown
3-1/4" × 0.83"
Milled to orderView profile →
Crown
4-1/2" × 0.794"
Milled to orderView profile →
Crown
3-1/2" × 13/16"
Milled to orderView profile →
Crown
4-1/2" × 1.326"
Milled to orderView profile →
Crown
6-3/4" × 0.779"
Milled to orderView profile →
Crown
3" × 3"
Milled to orderView profile →
Crown
7" × 1.296"
Milled to orderView profile →
Crown
5" × 0.837"
Milled to orderView profile →
Crown
3-1/2" × 0.782"
Milled to orderView profile →
Crown
4" × 1.235"
Milled to orderView profile →
Crown
5-3/4" × 1.632"
Milled to orderView profile →
Crown
7" × 3/4"
Milled to orderView profile →
Crown
12" × 1.768"
Milled to orderView profile →
Crown
6-1/4" × 1.17"
Milled to orderView profile →
Crown
5" × 1.179"
Milled to orderView profile →
Crown
6-1/2" × 1.167"
Milled to orderView profile →
Crown
4-1/4" × 1.304"
Milled to orderView profile →
Crown
6-1/2" × 0.82"
Milled to orderView profile →
Crown
1-3/4" × 9/16"
Milled to orderView profile →
Crown
6" × 1.032"
Milled to orderView profile →
Crown
8-1/4" × 1.799"
Milled to orderView profile →
Crown
5-1/2" × 1.338"
Milled to orderView profile →
Crown
7" × 0.91"
Milled to orderView profile →
Crown
5-1/4" × 0.832"
Milled to orderView profile →
Crown
5-1/2" × 0.831"
Milled to orderView profile →
Crown
12" × 1.67"
Milled to orderView profile →
Crown
8" × 1.538"
Milled to orderView profile →
Crown
5-1/2" × 0.882"
Milled to orderView profile →
Crown
5" × 0.927"
Milled to orderView profile →
Crown
8-3/4" × 1.108"
Milled to orderView profile →
Crown
4-1/2" × 0.864"
Milled to orderView profile →
Crown
4-1/2" × 0.86"
Milled to orderView profile →
Crown
4-3/4" × 0.787"
Milled to orderView profile →
Crown
5" × 0.855"
Milled to orderView profile →
Crown
3-3/4" × 0.781"
Milled to orderView profile →
Crown
8-3/4" × 1.216"
Milled to orderView profile →
Crown
7-1/2" × 1.089"
Milled to orderView profile →
Crown
4" × 0.829"
Milled to orderView profile →
Crown
5" × 1.073"
Milled to orderView profile →
Crown
7-1/2" × 1.293"
Milled to orderView profile →
Crown
7" × 1.082"
Milled to orderView profile →
Crown
3" × 13/16"
Milled to orderView profile →
Crown
4-3/4" × 1.087"
Milled to orderView profile →
Crown
4" × 0.836"
Milled to orderView profile →
Crown
5-3/4" × 1.11"
Milled to orderView profile →
Crown
7-1/4" × 0.842"
Milled to orderView profile →
Crown
4-3/4" × 1.244"
Milled to orderView profile →
Crown
4-1/2" × 1-3/16"
Milled to orderView profile →
Crown
7-1/4" × 0.763"
Milled to orderView profile →
Crown
5-3/4" × 0.767"
Milled to orderView profile →
Crown
8-3/4" × 1.515"
Milled to orderView profile →
Crown
5-3/4" × 7/8"
Milled to orderView profile →
Crown
5-1/2" × 0.896"
Milled to orderView profile →
Crown
4-3/4" × 0.726"
Milled to orderView profile →
Crown
5-1/2" × 0.845"
Milled to orderView profile →
Crown
3-1/2" × 7/8"
Milled to orderView profile →
Crown
3-3/4" × 0.723"
Milled to orderView profile →
Crown
6-1/4" × 1.106"
Milled to orderView profile →
Crown
4-1/4" × 0.58"
Milled to orderView profile →
Crown
8" × 1.479"
Milled to orderView profile →
Crown
6" × 0.835"
Milled to orderView profile →
Crown
6-1/4" × 1.073"
Milled to orderView profile →
Crown
8-1/2" × 1.083"
Milled to orderView profile →
Crown
4-1/4" × 0.797"
Milled to orderView profile →
Crown
2-3/4" × 0.828"
Milled to orderView profile →
Crown
5-3/4" × 0.784"
Milled to orderView profile →
Crown
2-3/4" × 0.755"
Milled to orderView profile →
Crown
5-3/4" × 0.967"
Milled to orderView profile →
Crown
3" × 0.844"
Milled to orderView profile →
Crown
4-3/4" × 1.019"
Milled to orderView profile →
Crown
8" × 1.641"
Milled to orderView profile →
Crown
6-1/4" × 0.716"
Milled to orderView profile →
Crown
2-1/2" × 0.818"
Milled to orderView profile →
Crown
7-1/2" × 1.164"
Milled to orderView profile →
Crown
6-1/4" × 1.107"
Milled to orderView profile →
Crown
3-3/4" × 0.647"
Milled to orderView profile →
Crown
5-1/4" × 1.05"
Milled to orderView profile →
Crown
3-1/2" × 0.907"
Milled to orderView profile →
Crown
3-1/2" × 0.849"
Milled to orderView profile →
Crown
7-1/4" × 1.036"
Milled to orderView profile →
Crown
4-1/4" × 0.863"
Milled to orderView profile →
Crown
3-1/2" × 0.828"
Milled to orderView profile →
Crown
6-1/4" × 0.846"
Milled to orderView profile →
Crown
7" × 0.882"
Milled to orderView profile →
Crown
6-1/2" × 0.764"
Milled to orderView profile →
Crown
4-3/4" × 0.704"
Milled to orderView profile →
Crown
3-3/4" × 0.648"
Milled to orderView profile →
Crown
8" × 1.074"
Milled to orderView profile →
Crown
6-1/4" × 1.084"
Milled to orderView profile →
Crown
3-3/4" × 0.841"
Milled to orderView profile →
Crown
5-1/4" × 0.776"
Milled to orderView profile →
Crown
2-1/4" × 0.66"
Milled to orderView profile →
Crown
5-1/4" × 0.713"
Milled to orderView profile →
Crown
2-1/4" × 1.057"
Milled to orderView profile →
Crown
4-3/4" × 0.6"
Milled to orderView profile →
Crown
4" × 0.765"
Milled to orderView profile →
Crown
5" × 0.723"
Milled to orderView profile →
Crown
3-1/2" × 7/8"
Milled to orderView profile →
Crown
8-1/4" × 1-1/16"
Milled to orderView profile →
Crown
7-3/4" × 1.016"
Milled to orderView profile →
Crown
6-1/2" × 1.859"
Milled to orderView profile →
Crown
2-1/4" × 1.758"
Milled to orderView profile →
Crown
6-1/4" × 1-9/16"
Milled to orderView profile →
Crown
5-3/4" × 0.834"
Milled to orderView profile →
Crown
6-1/2" × 0.785"
Milled to orderView profile →
Crown
2-1/2" × 0.833"
Milled to orderView profile →
Crown
8-1/4" × 0.979"
Milled to orderView profile →
Crown
6-1/2" × 1-1/16"
Milled to orderView profile →
Crown
8" × 1.722"
Milled to orderView profile →
Crown
4-1/4" × 0.83"
Milled to orderView profile →
Crown
5" × 0.83"
Milled to orderView profile →
Crown
3-3/4" × 1.045"
Milled to orderView profile →
Crown
5" × 0.957"
Milled to orderView profile →
Crown
3-1/2" × 2.773"
Milled to orderView profile →
Crown
8-3/4" × 1.332"
Milled to orderView profile →
Crown
10-3/4" × 1.282"
Milled to orderView profile →
Crown
2-3/4" × 1.702"
Milled to orderView profile →
Crown
5-1/4" × 1.259"
Milled to orderView profile →
Crown
8-1/4" × 1.111"
Milled to orderView profile →
Crown
5" × 1.142"
Milled to orderView profile →
Crown
7" × 0.756"
Milled to orderView profile →
Crown
4-1/4" × 1.012"
Milled to orderView profile →
Crown
6" × 2.643"
Milled to orderView profile →
Crown
4" × 1.557"
Milled to orderView profile →
Crown
5-1/4" × 1.825"
Milled to orderView profile →
Crown
4" × 1-7/8"
Milled to orderView profile →
Crown
5-1/4" × 1.85"
Milled to orderView profile →
Crown
2-3/4" × 1.294"
Milled to orderView profile →
Crown
3-1/4" × 1.58"
Milled to orderView profile →
Crown
5-1/2" × 1.035"
Milled to orderView profile →
Crown
7" × 1.167"
Milled to orderView profile →
Crown
2" × 7/8"
Milled to orderView profile →
Crown
3-3/4" × 0.79"
Milled to orderView profile →
Crown
6" × 0.836"
Milled to orderView profile →
Crown
4-3/4" × 0.781"
Milled to orderView profile →
Crown
4-3/4" × 0.642"
Milled to orderView profile →
Crown
3" × 1.053"
Milled to orderView profile →
Crown
6-1/4" × 0.846"
Milled to orderView profile →
Crown
6" × 15/16"
Milled to orderView profile →
Crown
5-3/4" × 1.113"
Milled to orderView profile →
Crown
5-1/2" × 1-1/4"
Milled to orderView profile →
Crown
3" × 13/16"
Milled to orderView profile →
Crown
7-1/2" × 1.389"
Milled to orderView profile →
Crown
7" × 1-5/16"
Milled to orderView profile →
Crown
2-1/4" × 0.779"
Milled to orderView profile →
Crown
8-1/2" × 1.576"
Milled to orderView profile →
Crown
4-1/2" × 0.864"
Milled to orderView profile →
Crown
7-1/4" × 1.259"
Milled to orderView profile →
Crown
4-1/2" × 0.709"
Milled to orderView profile →
Crown
8" × 2.446"
Milled to orderView profile →
Crown
4-1/2" × 0.635"
Milled to orderView profile →
Crown
5-1/4" × 1"
Milled to orderView profile →
Crown
2-3/4" × 0.825"
Milled to orderView profile →
Crown
8-3/4" × 1.287"
Milled to orderView profile →
Crown
7-1/4" × 1.007"
Milled to orderView profile →
Crown
11-3/4" × 1.506"
Milled to orderView profile →
Crown
7-1/4" × 1.019"
Milled to orderView profile →
Crown
5-3/4" × 13/16"
Milled to orderView profile →
Crown
5-3/4" × 1.262"
Milled to orderView profile →
Crown
4-1/2" × 0.831"
Milled to orderView profile →
Crown
9-1/2" × 1.534"
Milled to orderView profile →
Crown
8" × 2.356"
Milled to orderView profile →
Crown
5-1/2" × 1.026"
Milled to orderView profile →
Crown
4" × 1.277"
Milled to orderView profile →
Crown
5-1/4" × 1.118"
Milled to orderView profile →
Crown
3" × 1.217"
Milled to orderView profile →
Crown
4-1/4" × 0.845"
Milled to orderView profile →
Crown
3-3/4" × 0.788"
Milled to orderView profile →
Crown
4-3/4" × 1.08"
Milled to orderView profile →
Crown
7" × 1.026"
Milled to orderView profile →
Crown
4-3/4" × 0.66"
Milled to orderView profile →
Crown
5-1/4" × 1.05"
Milled to orderView profile →
Crown
2" × 0.852"
Milled to orderView profile →
Crown
1-1/4" × 0.469"
Milled to orderView profile →
Crown
4" × 0.84"
Milled to orderView profile →
Crown
5" × 1.042"
Milled to orderView profile →
Crown
4-1/2" × 0.861"
Milled to orderView profile →
Crown
4-1/2" × 1.803"
Milled to orderView profile →
Crown
4-3/4" × 0.885"
Milled to orderView profile →
Crown
3-1/2" × 13/16"
Milled to orderView profile →
Crown
4-3/4" × 1.345"
Milled to orderView profile →
Crown
5-1/2" × 11/16"
Milled to orderView profile →
Crown
3-3/4" × 13/16"
Milled to orderView profile →
Crown
7-1/4" × 0.741"
Milled to orderView profile →
Crown
8-1/4" × 0.773"
Milled to orderView profile →
Crown
6-1/2" × 1.025"
Milled to orderView profile →
Crown
5-1/4" × 0.765"
Milled to orderView profile →
Crown
11-1/4" × 1.074"
Milled to orderView profile →
Crown
5" × 0.9"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
Crown vs. cove moulding — what’s the difference and which one do I need?
Crown moulding is sprung — it sits at an angle bridging the wall and ceiling, with an ornate profile that can include curves, beads, and steps. Cove moulding is a single concave curve, sitting flat into the wall-ceiling corner. Crown reads as traditional and substantial; cove reads as clean and quieter. For 8-foot ceilings, cove or small crown. For 9-foot+, scale up.
Read the answer →Cabinet crown molding vs. room crown — how do they work together?
Cabinet crown molding sits on top of upper cabinets, finishing the cabinet-to-ceiling transition. Room crown moulding runs along the wall-ceiling seam around the rest of the room. These two crowns typically don’t coexist in the same kitchen — the cabinet crown is the dominant ceiling treatment when present, and room crown would visually compete. Use cabinet crown in kitchens with upper cabinets that reach close to the ceiling; use room crown elsewhere.
Read the answer →What size baseboard works with 9-foot ceilings?
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →What trim goes where? A room-by-room guide.
Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →

