Skip to main content
Unique Wood Products

08COLCR Crown

1" × 5-7/8" — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.

  • Dimensioned section
  • Spec sheet PDF
  • Counter order codes
Availability
Made to order
Lead time
Confirmed at quote
Price
Priced by the foot or the piece on your quoteRequest a quote
Sample
Order a sampleHold it before you order
LIVE MODEL
08COLCR Crown Moulding — isometric profile render
Material
Primed FJ Pine
Width
1" × 5-7/8"
Thickness
—
Availability
Special Order

Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.

Specify this moulding

CROWN MOULDING · NW HOUSTON / TANNER RD

Primed FJ Pine · 1" × 5-7/8"

Crown · 16′ stick

PROFILE

08COLCR

priced by the piece on your quote

The 08COLCR crown profile in 1" × 5-7/8" — a sprung cornice for the wall-to-ceiling line. Run to order in primed finger-joint pine, milled in solid Red Oak and White Oak, and special-ordered in Maple, Pine, Knotty Alder, Primed MDF, and Flex for curved walls.

Wood Crown Moulding · Mill-run oak · Special-order primed & species

Material & finish

Primed FJ Pine

Colour is indicative — grain and colour vary board to board.

Special OrderPrimed FJ Pine · 16′ stick

Dimensions

1" × 5-7/8"

A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.

Width
1" × 5-7/8"FIXED
Thickness
—FIXED

Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.

Your specification

Primed FJ Pine
SKU
08COLCR
Profile
Crown · Crown Moulding
Material
Primed FJ Pine
Section
1" × 5-7/8"
Sold by
16′ stick
Pairs with
Matching baseboard, casing, and bed mould for a built-up cornice and full trim package.
Finish
Unfinished — site finish by others
SPEC DOCUMENTSDrawn from this profile’s own section

Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.

PROFILE

08COLCR

By finish

The profile rendered in each material it is sold in. These show finish, not size — the drawing above carries the dimensions.

08COLCR crown moulding — Primed MDF finish
Primed MDFPrimed MDF — smooth, paint-grade alternative.

Where crown earns its keep

  • Wall-to-ceiling crown

    Springs across the top-of-wall line to finish a room with a defined, shadowed cornice.

  • Cabinet & casework topper

    Caps upper cabinets, bookcases, and built-ins where they meet the ceiling.

  • Tray & coffered ceilings

    Defines the step in tray ceilings and the edges of coffered grids.

  • Built-up cornice

    Stacks with base, cove, and bed mouldings to build a larger custom cornice.

What contractors actually ask

What size is it?
08COLCR has a 1" × 5-7/8" face and springs in place as a cornice. Bring your ceiling height and we'll confirm the reveal.
What species and materials?
Primed finger-joint pine and MDF (paint-grade, special order); Milled to Order on our own machine in solid Red Oak and White Oak; Special Order in Maple, Pine, Knotty Alder, and Flex.
What lengths?
Primed finger-joint pine is sold by the piece in 16′ sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
Do you have a flexible version for curved walls?
Yes — a flex profile that bends to inside and outside radii, matching the rigid crown so curved and straight runs read continuous.
Can you match an existing crown profile?
Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
Pickup or delivery?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
All answers →