714COLCR Crown
5-1/4" × 5-1/4" projection — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Made to order
- Lead time
- Confirmed at quote
- Price
- Priced by the foot or the piece on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Width
- 5-1/4" × 5-1/4" projection
- Thickness
- —
- Availability
- Special Order
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 5-1/4" × 5-1/4" projection
Crown · 16′ stick
PROFILE
714COLCR
priced by the piece on your quote
The 714COLCR crown profile in 5-1/4" × 5-1/4" projection — a sprung cornice for the wall-to-ceiling line. Run to order in primed finger-joint pine, milled in solid Red Oak and White Oak, and special-ordered in Maple, Pine, Knotty Alder, Primed MDF, and Flex for curved walls.
Wood Crown Moulding · Mill-run oak · Special-order primed & species
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Dimensions
5-1/4" × 5-1/4" projectionA stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- 714COLCR
- Profile
- Crown · Crown Moulding
- Material
- Primed FJ Pine
- Section
- 5-1/4" × 5-1/4" projection
- Sold by
- 16′ stick
- Pairs with
- Matching baseboard, casing, and bed mould for a built-up cornice and full trim package.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
714COLCRpriced by the piece on your quote
Specification · 714COLCR
Primed FJ Pine · 5-1/4" × 5-1/4" projection · Crown
By finish
The profile rendered in each material it is sold in. These show finish, not size — the drawing above carries the dimensions.

Where crown earns its keep
Wall-to-ceiling crown
Springs across the top-of-wall line to finish a room with a defined, shadowed cornice.
Cabinet & casework topper
Caps upper cabinets, bookcases, and built-ins where they meet the ceiling.
Tray & coffered ceilings
Defines the step in tray ceilings and the edges of coffered grids.
Built-up cornice
Stacks with base, cove, and bed mouldings to build a larger custom cornice.
What contractors actually ask
- What size is it?
- 714COLCR has a 5-1/4" × 5-1/4" projection face and springs in place as a cornice. Bring your ceiling height and we'll confirm the reveal.
- What species and materials?
- Primed finger-joint pine and MDF (paint-grade, special order); Milled to Order on our own machine in solid Red Oak and White Oak; Special Order in Maple, Pine, Knotty Alder, and Flex.
- What lengths?
- Primed finger-joint pine is sold by the piece in 16′ sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
- Do you have a flexible version for curved walls?
- Yes — a flex profile that bends to inside and outside radii, matching the rigid crown so curved and straight runs read continuous.
- Can you match an existing crown profile?
- Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Questions people ask about crown moulding
Crown vs. cove moulding — what’s the difference and which one do I need?
Crown moulding is sprung — it sits at an angle bridging the wall and ceiling, with an ornate profile that can include curves, beads, and steps. Cove moulding is a single concave curve, sitting flat into the wall-ceiling corner. Crown reads as traditional and substantial; cove reads as clean and quieter. For 8-foot ceilings, cove or small crown. For 9-foot+, scale up.
Read the answer →Cabinet crown molding vs. room crown — how do they work together?
Cabinet crown molding sits on top of upper cabinets, finishing the cabinet-to-ceiling transition. Room crown moulding runs along the wall-ceiling seam around the rest of the room. These two crowns typically don’t coexist in the same kitchen — the cabinet crown is the dominant ceiling treatment when present, and room crown would visually compete. Use cabinet crown in kitchens with upper cabinets that reach close to the ceiling; use room crown elsewhere.
Read the answer →How much trim do I need? A room-by-room calculation guide.
Calculate baseboard by measuring the perimeter of every room, subtracting door openings, then adding 10% for waste. Casing needs 17 to 20 linear feet per standard door, 14 to 17 per window. Crown takes the same perimeter as base. Shoe and quarter round match the base. The trim and casing calculator on our site does the math by room — feed in dimensions, get a total order list.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →






