Crown moulding · by ceiling height
Crown Moulding for 12 ft Ceilings
104 profiles · 104 milled to order
At 12 ft a crown is architecture. The face runs from 6″ to 8″, the projection is measured in inches rather than fractions, and the piece usually goes up as an assembly with blocking behind it. This is the ceiling height of a two-storey entry or a great room, where the crown has to hold its own against tall windows and a stair.
The single-piece profiles here reach 8″. Beyond that the mill builds the cornice from two or three of them; the section drawing on each profile page shows the projection so the assembly can be drawn before it is ordered.
Other crown moulding profiles

Crown
6" × 0.85"
Milled to orderView profile →
Crown
6" × 0.783"
Milled to orderView profile →
Crown
6" × 1.304"
Milled to orderView profile →
Crown
6" × 1.153"
Milled to orderView profile →
Crown
6" × 0.764"
Milled to orderView profile →
Crown
6-1/4" × 1-1/2"
Milled to orderView profile →
Crown
6-1/4" × 0.76"
Milled to orderView profile →
Crown
6-1/2" × 1.107"
Milled to orderView profile →
Crown
6-1/2" × 0.844"
Milled to orderView profile →
Crown
6-1/2" × 1.141"
Milled to orderView profile →
Crown
7-1/4" × 1.524"
Milled to orderView profile →
Crown
6-1/2" × 0.777"
Milled to orderView profile →
Crown
6-3/4" × 0.914"
Milled to orderView profile →
Crown
6-3/4" × 1-1/8"
Milled to orderView profile →
Crown
6-3/4" × 0.763"
Milled to orderView profile →
Crown
7" × 1-3/16"
Milled to orderView profile →
Crown
7-1/4" × 1-5/16"
Milled to orderView profile →
Crown
7" × 0.91"
Milled to orderView profile →
Crown
7-1/4" × 0.892"
Milled to orderView profile →
Crown
7-1/4" × 0.848"
Milled to orderView profile →
Crown
6" × 0.837"
Milled to orderView profile →
Crown
7-1/4" × 0.741"
Milled to orderView profile →
Crown
7-1/4" × 1.526"
Milled to orderView profile →
Crown
7-1/2" × 7/8"
Milled to orderView profile →
Crown
7-1/2" × 0.889"
Milled to orderView profile →
Crown
7-1/2" × 1-1/8"
Milled to orderView profile →
Crown
7-1/4" × 0.825"
Milled to orderView profile →
Crown
7-1/4" × 1.132"
Milled to orderView profile →
Crown
7-1/2" × 1.171"
Milled to orderView profile →
Crown
7-3/4" × 1.032"
Milled to orderView profile →
Crown
7-3/4" × 1.038"
Milled to orderView profile →
Crown
7-3/4" × 0.926"
Milled to orderView profile →
Crown
8" × 1.488"
Milled to orderView profile →
Crown
8" × 0.842"
Milled to orderView profile →
Crown
8" × 1-3/16"
Milled to orderView profile →
Crown
6" × 0.913"
Milled to orderView profile →
Crown
7-1/4" × 0.906"
Milled to orderView profile →
Crown
8" × 1.28"
Milled to orderView profile →
Crown
6-3/4" × 1.019"
Milled to orderView profile →
Crown
6-3/4" × 1.146"
Milled to orderView profile →
Crown
7" × 0.789"
Milled to orderView profile →
Crown
7-1/4" × 1.028"
Milled to orderView profile →
Crown
6-3/4" × 0.826"
Milled to orderView profile →
Crown
7" × 2-11/16"
Milled to orderView profile →
Crown
6" × 0.774"
Milled to orderView profile →
Crown
7-1/4" × 1.261"
Milled to orderView profile →
Crown
6-1/2" × 1"
Milled to orderView profile →
Crown
6-1/2" × 0.829"
Milled to orderView profile →
Crown
6-1/2" × 1.158"
Milled to orderView profile →
Crown
6" × 1.032"
Milled to orderView profile →
Crown
7-3/4" × 1.339"
Milled to orderView profile →
Crown
6-1/4" × 1.132"
Milled to orderView profile →
Crown
7-1/4" × 1.167"
Milled to orderView profile →
Crown
7" × 1.108"
Milled to orderView profile →
Crown
6-3/4" × 0.779"
Milled to orderView profile →
Crown
7" × 1.296"
Milled to orderView profile →
Crown
7" × 3/4"
Milled to orderView profile →
Crown
6-1/4" × 1.17"
Milled to orderView profile →
Crown
6-1/2" × 1.167"
Milled to orderView profile →
Crown
6-1/2" × 0.82"
Milled to orderView profile →
Crown
6" × 1.032"
Milled to orderView profile →
Crown
7" × 0.91"
Milled to orderView profile →
Crown
8" × 1.538"
Milled to orderView profile →
Crown
7-1/2" × 1.089"
Milled to orderView profile →
Crown
7-1/2" × 1.293"
Milled to orderView profile →
Crown
7" × 1.082"
Milled to orderView profile →
Crown
7-1/4" × 0.842"
Milled to orderView profile →
Crown
7-1/4" × 0.763"
Milled to orderView profile →
Crown
6-1/4" × 1.106"
Milled to orderView profile →
Crown
8" × 1.479"
Milled to orderView profile →
Crown
6" × 0.835"
Milled to orderView profile →
Crown
6-1/4" × 1.073"
Milled to orderView profile →
Crown
8" × 1.641"
Milled to orderView profile →
Crown
6-1/4" × 0.716"
Milled to orderView profile →
Crown
7-1/2" × 1.164"
Milled to orderView profile →
Crown
6-1/4" × 1.107"
Milled to orderView profile →
Crown
7-1/4" × 1.036"
Milled to orderView profile →
Crown
6-1/4" × 0.846"
Milled to orderView profile →
Crown
7" × 0.882"
Milled to orderView profile →
Crown
6-1/2" × 0.764"
Milled to orderView profile →
Crown
8" × 1.074"
Milled to orderView profile →
Crown
6-1/4" × 1.084"
Milled to orderView profile →
Crown
7-3/4" × 1.016"
Milled to orderView profile →
Crown
6-1/2" × 1.859"
Milled to orderView profile →
Crown
6-1/4" × 1-9/16"
Milled to orderView profile →
Crown
6-1/2" × 0.785"
Milled to orderView profile →
Crown
6-1/2" × 1-1/16"
Milled to orderView profile →
Crown
8" × 1.722"
Milled to orderView profile →
Crown
7" × 0.756"
Milled to orderView profile →
Crown
6" × 2.643"
Milled to orderView profile →
Crown
7" × 1.167"
Milled to orderView profile →
Crown
6" × 0.836"
Milled to orderView profile →
Crown
6-1/4" × 0.846"
Milled to orderView profile →
Crown
6" × 15/16"
Milled to orderView profile →
Crown
7-1/2" × 1.389"
Milled to orderView profile →
Crown
7" × 1-5/16"
Milled to orderView profile →
Crown
7-1/4" × 1.259"
Milled to orderView profile →
Crown
8" × 2.446"
Milled to orderView profile →
Crown
7-1/4" × 1.007"
Milled to orderView profile →
Crown
7-1/4" × 1.019"
Milled to orderView profile →
Crown
8" × 2.356"
Milled to orderView profile →
Crown
7" × 1.026"
Milled to orderView profile →
Crown
7-1/4" × 0.741"
Milled to orderView profile →
Crown
6-1/2" × 1.025"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
Crown vs. cove moulding — what’s the difference and which one do I need?
Crown moulding is sprung — it sits at an angle bridging the wall and ceiling, with an ornate profile that can include curves, beads, and steps. Cove moulding is a single concave curve, sitting flat into the wall-ceiling corner. Crown reads as traditional and substantial; cove reads as clean and quieter. For 8-foot ceilings, cove or small crown. For 9-foot+, scale up.
Read the answer →Cabinet crown molding vs. room crown — how do they work together?
Cabinet crown molding sits on top of upper cabinets, finishing the cabinet-to-ceiling transition. Room crown moulding runs along the wall-ceiling seam around the rest of the room. These two crowns typically don’t coexist in the same kitchen — the cabinet crown is the dominant ceiling treatment when present, and room crown would visually compete. Use cabinet crown in kitchens with upper cabinets that reach close to the ceiling; use room crown elsewhere.
Read the answer →What size baseboard works with 9-foot ceilings?
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →What trim goes where? A room-by-room guide.
Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →

