Moulding family
Baseboard
301 profiles · 28 stocked at Tanner Rd · 258 milled to order
Baseboard is the trim that takes the abuse: vacuum heads, chair legs, mop water. The profile has to read well from standing height and still shrug off a paint touch-up every few years, which is why the plain-topped patterns outsell the ornate ones in Houston about four to one. The stocked board is primed finger-jointed pine in four width bands, kept on the rack so a flooring store can close a job the same week.
The library behind it is knife profiles: one knife, milled at 5-1/2″, 6-1/4″ and 7-1/4″, so the same base runs through a house at three heights and still mitres together. Any of them can be cut in solid red oak, white oak, maple or poplar, or in paint-grade. A sample of an existing base — even a broken-off foot — is enough to match it.
Narrow the 301 profiles by style (8), face height (6) below, or use the catalogue's finder for a SKU.

Baseboard
3-1/4" × 9/16"
In stockView profile →
Baseboard
3-1/4" × 9/16"
In stockView profile →
Baseboard
3-1/4" × 9/16"
In stockView profile →
Baseboard
3-1/4" × 9/16"
In stockView profile →
Baseboard
3-1/4" × 9/16"
In stockView profile →
Baseboard
4" × 9/16"
In stockView profile →
Baseboard
4-1/4" × 9/16"
In stockView profile →
Baseboard
4-1/4" × 9/16"
In stockView profile →
Baseboard
4-1/2" × 9/16"
In stockView profile →
Baseboard
4-1/2" × 9/16"
In stockView profile →
Baseboard
4-1/2" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
5-1/4" × 9/16"
In stockView profile →
Baseboard
6-1/2" × 9/16"
In stockView profile →
Baseboard
8-1/4" × 9/16"
In stockView profile →
Square-Edge Scant
2-1/2" × 9/16"
In stockView profile →
Square-Edge Scant
3-1/2" × 9/16"
In stockView profile →
Square-Edge Scant
5-1/2" × 9/16"
In stockView profile →
Square-Edge Scant
7-1/4" × 9/16"
In stockView profile →
Baseboard
3" × 7/16"
In stockView profile →
Baseboard
3-1/4" × 9/16"
In stockView profile →Baseboard
3-1/2" × 1/2"
In stockView profile →
Baseboard
4-1/2" × 1-1/16"
Special orderView profile →
Baseboard
3-1/4" × 9/16"
Special orderView profile →
Baseboard
4-1/4" × 1-1/16"
Special orderView profile →
Baseboard
3" × 7/16"
Special orderView profile →
Baseboard
6-1/2" × 9/16"
Special orderView profile →Baseboard
5-1/4" × 3/8"
Special orderView profile →
Baseboard
4-1/2" × 5/8"
Special orderView profile →
Baseboard
3-1/4" × 9/16"
Special orderView profile →
Baseboard
5-1/4" × 9/16"
Special orderView profile →
Baseboard
3-1/4" × 5/8"
Special orderView profile →
Baseboard
3-1/4" × 5/8"
Special orderView profile →
Baseboard
5-1/4" × 9/16"
Special orderView profile →
Baseboard
6-1/4" × 9/16"
Special orderView profile →Baseboard
3-3/4" × 7/16"
Special orderView profile →
Baseboard
3" × 7/16"
Special orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 5/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.834"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.856"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 9/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1.014"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.608"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 5/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 5/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-3/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.785"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1.076"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-3/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.778"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 5/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 9/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.805"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 9/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.841"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.821"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.847"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 9/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.83"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.716"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 11/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 0.781"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1.095"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 9/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 15/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 7/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 5/8"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 1-1/16"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" / 6-1/4" / 7-1/4" × 3/4"
Milled to orderView profile →
Base
4-1/2" × 1-1/8"
Milled to orderView profile →
Base
5-1/2" × 13/16"
Milled to orderView profile →
Base
6" × 9/16"
Milled to orderView profile →
Base
5-7/16" × 13/16"
Milled to orderView profile →
Base
4" × 13/16"
Milled to orderView profile →
Base
7-1/4" × 13/16"
Milled to orderView profile →
Base
4" × 13/16"
Milled to orderView profile →
Base
7-3/16" × 0.772"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
3-1/2" × 3/4"
Milled to orderView profile →
Base
4" × 5/8"
Milled to orderView profile →
Base
5-1/4" × 1"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
5-1/2" × 11/16"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
5-1/2" × 11/16"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 0.703"
Milled to orderView profile →
Base
6-1/4" × 13/16"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 1"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 1"
Milled to orderView profile →
Base
6-1/4" × 0.703"
Milled to orderView profile →
Base
6-1/4" × 1-1/2"
Milled to orderView profile →
Base
6-1/4" × 1"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 11/16"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/4" × 0.531"
Milled to orderView profile →
Base
4-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 5/8"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 0.659"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 5/8"
Milled to orderView profile →
Base
7-1/4" × 0.76"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 1"
Milled to orderView profile →
Base
5-1/2" × 9/16"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 0.947"
Milled to orderView profile →
Base
4-1/2" × 0.619"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
4-1/2" × 0.854"
Milled to orderView profile →
Base
8-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 13/16"
Milled to orderView profile →
Base
5-1/2" × 3/4"
Milled to orderView profile →
Base
4-1/2" × 3/4"
Milled to orderView profile →
Base
6-1/4" × 5/8"
Milled to orderView profile →
Base
7-1/4" × 1"
Milled to orderView profile →
Base
4-1/2" × 3/4"
Milled to orderView profile →
Base
7-1/4" × 7/8"
Milled to orderView profile →
Base
4-1/2" × 0.788"
Milled to orderView profile →
Base
7-1/4" × 3/4"
Milled to orderView profile →
Base
8-1/2" × 3/4"
Milled to orderView profile →
Base
8-1/4" × 1-3/16"
Milled to orderView profile →
Base
4-1/4" × 1/2"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
What size baseboard works with 9-foot ceilings?
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →MDF vs. solid wood baseboards — what should I use?
MDF baseboards are cheaper, take paint smoothly, and arrive with a perfect surface — but they swell with water, dent easily, and can’t be sanded or stained. Solid wood baseboards cost more and have visible grain, but they hold up to mopping, kicks, and Houston humidity, and they can be stained, sanded, and refinished. For a forever home, solid wood is the better long-term call.
Read the answer →Shoe moulding vs. quarter round — what’s the difference and which one do I need?
Quarter round is a true quarter-circle profile — equal on both faces, typically 3/4″ × 3/4″. Shoe moulding is taller than it is wide — typically 1/2″ × 3/4″, with a softer rounded face — sitting more discretely against the baseboard. Both finish the seam between baseboard and floor. Pick shoe moulding when you want a quieter look; quarter round when you have a wider gap to cover.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

