
PoplarPaint-Grade · Most Popular
Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.
4-1/4" × 9/16" — stocked at NW Houston / Tanner Rd in Primed FJ Pine. Milled to order in any species, or ground to match an existing profile.
Primed FJ Pine · 4-1/4" × 9/16"
Baseboard · 16'
ORDER CODE
620PR-16
at the Tanner Rd counter
The UW620 baseboard profile in 4-1/4" × 9/16" primed finger-joint pine — milled, factory-primed, and part of the core catalog for flooring retailers. Trim-ready out of the bundle: no sanding, no priming. Caulk, paint, install.
Flooring Store Partner Program · Trim-Ready · in the core catalog
Colour is indicative — grain and colour vary board to board.
Also ordered as FJ Pine · Random length · 1031213.
A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another height, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
ORDER CODE
620PR-16at the Tanner Rd counter
Specification · UW620
Primed FJ Pine · 4-1/4" × 9/16" · Baseboard
THE ROOM STUDIO
Start with this profile in primed FJ pine. Explore baseboard, casing, crown, and shoe together, then share your room selection.
View UW620 in Room StudioUW620 selected when you open the studio.

Stocked profiles run primed for paint; in solid wood this one is milled to order, so the species is your choice rather than whatever is on the shelf. These are the five we run most for baseboard — pick one in the swatches above to see this profile in it.

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.
Caps the wall-to-floor joint with a clean, paint-ready profile.
cataloged to coordinate with the floors retailers sell — short runs welcome, no overbuying.
Retail-friendly quantities for additions, partial replacements, and patch-ins.
Finger-jointed and factory-primed — stable, straight, ready for trim paint.
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →Quarter round is a true quarter-circle profile — equal on both faces, typically 3/4″ × 3/4″. Shoe moulding is taller than it is wide — typically 1/2″ × 3/4″, with a softer rounded face — sitting more discretely against the baseboard. Both finish the seam between baseboard and floor. Pick shoe moulding when you want a quieter look; quarter round when you have a wider gap to cover.
Read the answer →MDF baseboards are cheaper, take paint smoothly, and arrive with a perfect surface — but they swell with water, dent easily, and can’t be sanded or stained. Solid wood baseboards cost more and have visible grain, but they hold up to mopping, kicks, and Houston humidity, and they can be stained, sanded, and refinished. For a forever home, solid wood is the better long-term call.
Read the answer →Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →