EBASE Baseboard
3-1/2" × 1/2" — stocked at NW Houston / Tanner Rd in Primed FJ Pine. Milled to order in any species, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Core catalogTanner Rd, NW Houston
- Lead time
- Confirmed at quote
- Price
- Priced by the linear foot on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Height
- 3-1/2" × 1/2"
- Thickness
- —
- Availability
- In Stock
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 3-1/2" × 1/2"
Baseboard · 16′ stick
PROFILE
EBASE
priced by the piece on your quote
The EBASE baseboard profile in 3-1/2" × 1/2" primed finger-joint pine — milled, factory-primed, and part of the core catalog for flooring retailers. Trim-ready out of the bundle: no sanding, no priming. Caulk, paint, install.
Flooring Store Partner Program · Trim-Ready · in the core catalog
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Also ordered as FJ Pine · Random length · 1033150; Solid Pine · Random length · 1033148.
Dimensions
3-1/2" × 1/2"A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another height, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- EBASE
- Profile
- Baseboard
- Material
- Primed FJ Pine
- Section
- 3-1/2" × 1/2"
- Sold by
- 16′ stick
- Pairs with
- Quarter Round (UW106), Base Shoe (UW126), Square Shoe (UW128), and matching casing for full trim packages.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
EBASEpriced by the piece on your quote
Specification · EBASE
Primed FJ Pine · 3-1/2" × 1/2" · Baseboard
THE ROOM STUDIO
Bring your trim together.
Explore selected stocked primed mouldings together in an interactive room. Compare combinations and share your selection.
Explore the Room StudioAvailable for selected primed profiles in the collection.

By finish
The profile rendered in each material it is sold in. These show finish, not size — the drawing above carries the dimensions.

Where baseboard earns its keep
Finished wall base
Caps the wall-to-floor joint with a clean, paint-ready profile.
Flooring-store trim partner
cataloged to coordinate with the floors retailers sell — short runs welcome, no overbuying.
Remodel & repair runs
Retail-friendly quantities for additions, partial replacements, and patch-ins.
Paint-grade, trim-ready
Finger-jointed and factory-primed — stable, straight, ready for trim paint.
What contractors actually ask
- Is this stocked or made to order?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- What does "trim-ready" mean?
- Factory-primed and sanded — no field priming. Caulk, paint, and install. Finger-jointed for straightness and stability.
- How is it sold?
- Sold by the piece — a full 16′ primed finger-joint pine stick, 3-1/2" × 1/2" nominal. Order by the piece; short counts welcome.
- Can you match this to a floor or an existing base?
- Yes — that's the point of the program. Bring a floor selection or a sample and we coordinate the base, shoe, and transitions to match.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Questions people ask about baseboard
What size baseboard works with 9-foot ceilings?
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →Shoe moulding vs. quarter round — what’s the difference and which one do I need?
Quarter round is a true quarter-circle profile — equal on both faces, typically 3/4″ × 3/4″. Shoe moulding is taller than it is wide — typically 1/2″ × 3/4″, with a softer rounded face — sitting more discretely against the baseboard. Both finish the seam between baseboard and floor. Pick shoe moulding when you want a quieter look; quarter round when you have a wider gap to cover.
Read the answer →MDF vs. solid wood baseboards — what should I use?
MDF baseboards are cheaper, take paint smoothly, and arrive with a perfect surface — but they swell with water, dent easily, and can’t be sanded or stained. Solid wood baseboards cost more and have visible grain, but they hold up to mopping, kicks, and Houston humidity, and they can be stained, sanded, and refinished. For a forever home, solid wood is the better long-term call.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →







