BAB514 Baseboard
5-1/4" × 3/8" — milled to order at NW Houston / Tanner Rd in Primed FJ Pine, Red Oak, White Oak, Maple, Pine, Knotty Alder, Primed MDF, Flex, or ground to match an existing profile.
- Dimensioned section
- Spec sheet PDF
- Counter order codes
- Availability
- Available to order
- Lead time
- Confirmed at quote
- Price
- Priced by the foot or the piece on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
- Material
- Primed FJ Pine
- Height
- 5-1/4" × 3/8"
- Thickness
- —
- Availability
- Special Order
Shown as a fixed render. The turnable model needs this profile's milled section, which we hold on the knife rather than in the catalogue — ask us for the section and we will send the drawing.
Specify this moulding
Primed FJ Pine · 5-1/4" × 3/8"
Baseboard · Full-length stick
PROFILE
BAB514
priced by the piece on your quote
The BAB514 baseboard profile in 5-1/4" × 3/8" — run to order in solid hardwoods, paint-grade primed, and MDF.
Baseboard · Special order · Custom milling available
Material & finish
Primed FJ PineColour is indicative — grain and colour vary board to board.
Dimensions
5-1/4" × 3/8"A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the piece.
Need this section at another height, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.
Your specification
Primed FJ Pine- SKU
- BAB514
- Profile
- Baseboard
- Material
- Primed FJ Pine
- Section
- 5-1/4" × 3/8"
- Sold by
- Full-length stick
- Pairs with
- Matching base, casing, and crown for a coordinated millwork program.
- Finish
- Unfinished — site finish by others
Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.
PROFILE
BAB514priced by the piece on your quote
Specification · BAB514
Primed FJ Pine · 5-1/4" × 3/8" · Baseboard
Where baseboard earns its keep
Baseboard detail
A finished baseboard profile for trim, panel, and millwork detailing.
Paint-grade or stain-grade
Primed FJ pine and MDF for paint; solid Red/White Oak, Maple, Pine, and Knotty Alder for stain.
Whole-project trim package
Coordinates with matching base, casing, and crown for a consistent millwork program.
Custom runs
Match an existing profile or run a custom length — our mill cuts to spec.
What contractors actually ask
- Is it stocked or made to order?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- What materials does it come in?
- Primed finger-joint pine and MDF (paint-grade), and solid Red Oak, White Oak, Maple, Pine, and Knotty Alder (stain-grade).
- What lengths?
- Primed finger-joint pine is sold by the piece in full-length sticks. Solid wood runs random length (≈3′–16′) and is pulled to your total footage.
- Can you match an existing baseboard profile?
- Yes. Our mill custom-runs to an existing profile or a sample stick. Send a sketch or sample to info@uniquewoodproducts.com.
- Pickup or delivery?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Questions people ask about baseboard
What size baseboard works with 9-foot ceilings?
For 9-foot ceilings, the standard recommendation is a 5-1/4″ to 7-1/4″ baseboard — roughly 5% to 8% of ceiling height. 5-1/4″ keeps the room feeling modern and uncluttered; 7-1/4″ reads as traditional and substantial. Don’t go below 4-1/4″ on a 9-foot ceiling; the proportions look pinched. Match the casing scale — bigger base wants 3-1/2″ or wider casing.
Read the answer →Shoe moulding vs. quarter round — what’s the difference and which one do I need?
Quarter round is a true quarter-circle profile — equal on both faces, typically 3/4″ × 3/4″. Shoe moulding is taller than it is wide — typically 1/2″ × 3/4″, with a softer rounded face — sitting more discretely against the baseboard. Both finish the seam between baseboard and floor. Pick shoe moulding when you want a quieter look; quarter round when you have a wider gap to cover.
Read the answer →MDF vs. solid wood baseboards — what should I use?
MDF baseboards are cheaper, take paint smoothly, and arrive with a perfect surface — but they swell with water, dent easily, and can’t be sanded or stained. Solid wood baseboards cost more and have visible grain, but they hold up to mopping, kicks, and Houston humidity, and they can be stained, sanded, and refinished. For a forever home, solid wood is the better long-term call.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →







