Skip to main content
Unique Wood Products

Walnut — hardwood for stair treads and millwork

Chocolate brown. Best used where the species itself is a design feature.

Walnut plank, clear matte finish
Janka hardnessModerate

1,010 lbf

Softer than oak — walnut dents. It is specified and priced for color, not for durability.

Cost indexFeature

233 · red oak = 100

Computed from the wholesale price schedule for the 1″ 8070 tread program.

Availability

Milled to order · lead time confirmed at quote

Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.

What we mill it into

Character

Rich, deep, and premium.

Softer than oak — walnut dents. It is specified and priced for color, not for durability.

Best for

Accent millwork, rails, trim, and feature details.

How Walnut behaves in service

Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.

Tangential shrinkageModerate movement

7.8%

Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.

Radial shrinkage

5.5%

Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.

Basis

USDA Wood Handbook

Published laboratory constants for the species, not a UWP measurement.

Finishing

Finished clear or under oil; a stain would only hide the colour that is being paid for. Steam-dried stock is more uniform and duller than air-dried; the mill notes which it has.

Machining and fastening

Machines beautifully with sharp knives, turns cleanly and holds a fastener. The sapwood is pale and is either cut out or sorted, which is agreed at order.

Closest in hardness

The three species nearest Walnut on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.