Soft Maple — hardwood for stair treads and millwork
Grey-white to pale tan with occasional pink or brown fleck. About 25% less hard than Hard Maple; useful where wear is not the lead requirement.

950 lbf
The name is relative: it is still a hardwood, but at roughly 950 lbf it is materially softer than 1,450 lbf hard maple.
108 · red oak = 100
Indicative of lumber market position — not a UWP quote.
Milled to order · lead time confirmed at quote
Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.
What we mill it into
Character
Fine, usually straight, with more color variation than hard maple.
The name is relative: it is still a hardwood, but at roughly 950 lbf it is materially softer than 1,450 lbf hard maple.
Best for
Mouldings, doors, cabinetry, and interior millwork.
How Soft Maple behaves in service
Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.
8.2%
Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.
3.8%
Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.
USDA Wood Handbook
Published laboratory constants for the species, not a UWP measurement.
Finishing
Finishes like hard maple with less blotching and a touch more colour in the heart. The paint-grade choice where poplar is too soft.
Machining and fastening
Machines more easily than hard maple with less burning, and holds fasteners well. Occasional mineral streak shows under a clear coat.
Closest in hardness
The three species nearest Soft Maple on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.

