Skip to main content
Unique Wood Products

Mahogany — hardwood for stair treads and millwork

Red-brown with depth. A classic choice for warm luxury details.

Mahogany grain study
Janka hardnessModerate

900 lbf

Moderate — genuine mahogany is not a hard wood. It is bought for stability and figure, which is a different argument.

Cost indexFeature

258 · red oak = 100

Indicative of lumber market position — not a UWP quote.

Availability

Milled to order · lead time confirmed at quote

Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.

What we mill it into

Character

Elegant, smooth, and traditional.

Moderate — genuine mahogany is not a hard wood. It is bought for stability and figure, which is a different argument.

Best for

High-end millwork and architectural accents.

How Mahogany behaves in service

Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.

Tangential shrinkageLow movement

4.1%

Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.

Radial shrinkage

3.0%

Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.

Basis

USDA Wood Handbook

Published laboratory constants for the species, not a UWP measurement.

Finishing

The classic stain-grade species: fine, even pores that take colour uniformly and a natural red-brown that a clear coat brings up on its own.

Machining and fastening

One of the most stable and easiest-machining hardwoods there is; it carves, turns and mitres cleanly and holds a fastener. Genuine mahogany is chain-of-custody stock.

Closest in hardness

The three species nearest Mahogany on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.