Iron by finish
Low Sheen Black Iron Balusters & Newels
4 parts · 2 collections
Low Sheen Black is the flatter of the two blacks: less sheen than satin black, so the iron reads as a matte silhouette against painted trim and white risers. It is the finish of the hollow 1/2" square line — the plain square, the open loop and the single rectangle — and of the plain iron newel.
Below is every iron part in Low Sheen Black. The matching flat and rake shoes, plates and the concealed baluster fastener are on the iron accessories page; keep the whole stair in one black so the hardware reads as one finish.
Iron Balusters · 3
All iron balusters →Terms used on this page
Questions people ask before ordering
Iron vs. wood balusters — which one for my staircase?
Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →What are the IRC stair code rules in plain English?
The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →How do I find a stair installer in Houston?
Find a Houston stair installer by asking your hardwood supplier for referrals, checking specific experience with the product family you’re installing (retro-fit, full-build, curved), and confirming licensing, insurance, and finished references. Avoid installers who don’t mention acclimation, can’t explain the skirt-board math, or quote without seeing the stair in person. Ask for 3 finished-stair references in the species and product you’re installing.
Read the answer →How much does it cost to refinish a staircase?
Refinishing a residential staircase in Houston typically runs $400 to $1,200 for the treads only, $800 to $2,500 for treads plus risers and skirts, and $1,500 to $4,000 for full refinish including handrails and balusters. DIY runs about 30% of pro pricing in materials only. Severely worn or damaged stairs may cost more to refinish than to re-tread with new hardwood — get both quotes before committing.
Read the answer →





