Skip to main content
Unique Wood Products

How do I find a stair installer in Houston?

Find a Houston stair installer by asking your hardwood supplier for referrals, checking specific experience with the product family you’re installing (retro-fit, full-build, curved), and confirming licensing, insurance, and finished references. Avoid installers who don’t mention acclimation, can’t explain the skirt-board math, or quote without seeing the stair in person. Ask for 3 finished-stair references in the species and product you’re installing.

The short version

  • Start with referrals. UWP and other Houston millworks know which installers actually deliver — ask for a list. We’re not paid to refer; we recommend based on results.
  • Match installer to job. A retro-fit installer is not necessarily a curved-stair installer. Ask for 3 photos and references for stairs like yours.
  • Verify licensing and insurance. Texas doesn’t license finish carpenters specifically, but the installer should carry general liability and workers comp if they have employees.
  • Red flags: no mention of acclimation, can’t explain the skirt-board math, won’t see the stair in person, won’t provide references, "we’ll figure it out as we go."

The full answer

Houston has hundreds of finish carpenters and stair installers — and the quality range is enormous. Picking the wrong one can mean a stair that squeaks for years, treads that didn’t acclimate, riser heights that drift out of code, and finishes that don’t match the floor. Picking the right one means a stair that looks and feels right for the next 50 years. Below is the working playbook.

Start with referrals from your supplier

The fastest path to a good installer is your hardwood supplier. UWP and other Houston mills work with the same installers across hundreds of stair jobs every year — we know who does clean work, who responds to calls, who shows up on time, and who handles problems professionally when they come up.

We’re not paid for referrals. We recommend based on what we’ve seen from each installer’s finished work. Ask the front desk for a current referral list — most of the people on it have done multiple UWP jobs and are known quantities.

Match the installer to the job type

Stair installation has subspecialties. An installer who’s great at one type may not be the right person for another:

  • Retro-fit tread overlays (most common) — the 8071 / 8073 work. Many residential finish carpenters do this routinely.
  • Full new-build stairs — framing + treads + risers + balusters. Specialized stair contractors and high-end finish carpenters.
  • Curved or templated stairs — radius, spiral, winder geometries. Specialty installers only. UWP templates these on-site; the installer just has to set them.
  • Thick treads (1¾″+) — heavy material, structural-looking installs. Specialized.
  • Refinishing existing hardwood treads — different skill set, more like floor finishing than carpentry.

When you call an installer, ask for 3 photos and references for stairs like yours. If they can’t provide photos of the specific product family you’re installing, find another installer.

Verify licensing, insurance, and warranty

Texas does not require state licensing for finish carpenters or stair installers. Anyone can hang a shingle. So the bar is:

  • General liability insurance — covers property damage if something goes wrong on your job. Required. Ask for a current certificate of insurance with your address on it.
  • Workers compensation insurance — required if they have employees. Without it, you can be liable if a worker gets hurt on your property.
  • Written warranty — most reputable installers warrant their work for 1 year against installation failures (loose treads, gaps, squeaks). Some go longer.
  • City of Houston permits for stairs typically apply only to major remodels (changing the staircase structure). One-for-one tread replacement usually doesn’t require a permit, but check with your installer.

What to ask in the quote conversation

A 15-minute phone call with a prospective installer reveals most of what you need to know about their capability. Ask:

  • "How long do you acclimate the treads before install?" Right answer: 5 to 7 days in the install space. Wrong answer: "We don’t bother" or "We install the day they arrive."
  • "How do you handle the skirt board on a carpeted-stair retrofit?" Right answer: explains the 11/16″ skirt-board math and confirms they use 8071 / 8073 retro-fit treads (not 8070 full treads on top). Wrong answer: confusion or "we’ll see when we get there."
  • "What fasteners do you use on white oak?" Right answer: stainless steel or coated. Wrong answer: "regular trim screws" or "whatever I have on the truck."
  • "How do you finish where the new treads meet the existing floor?" Right answer: landing tread or scribe to match. Wrong answer: caulk or "we paint it."
  • "Will you come look at the stair before quoting?" Right answer: yes — every stair is different. Wrong answer: "Send me photos, I’ll quote off those."

Red flags

  • No acclimation discussion. Tells you they don’t care or don’t know.
  • Quote without seeing the stair. Every stair has unique geometry. Phone quotes are estimates at best.
  • No references for similar work. Tells you they haven’t done this product family.
  • Refuses to provide insurance documentation. Walk away.
  • Dramatically lowest quote. Real install labor doesn’t vary that much; a lowest quote usually means corners are being cut somewhere (no acclimation, cheap fasteners, no finish carpentry).
  • Demands large upfront payment. Standard is deposit at start, balance on completion. Anyone wanting full payment upfront is a risk.
  • Won’t put the warranty in writing. Verbal warranties don’t mean anything when you need to call them back in month 6.

Get 3 quotes (but don’t pick on price alone)

On a project as visible and long-lived as a stair, 3 quotes is the right number. More than that and you’re burning installer time who’s not getting your business; fewer and you don’t have enough comparison.

Read the quotes carefully — they should specify acclimation, fasteners, finishing approach, cleanup, and warranty terms. A quote that just lists a total price with no detail is not a real quote; it’s a bid.

Pick on the combination of price, detail, references, and how the conversation felt. The cheapest quote is rarely the right one. The most expensive isn’t either. The right one is usually the middle quote from the installer whose references checked out and who answered your questions well.

During the install

  • Be on site for at least the first day. Confirm the treads acclimated correctly, the layout matches what you discussed, and the installer is using the materials you ordered.
  • Don’t walk the stair during cure. 24 hours minimum after adhesive sets.
  • Take photos as the work progresses. Useful if a warranty issue comes up later.
  • Approve final color match before topcoat goes on (if finishing on-site).
  • Walk through and inspect before final payment. Look for gaps, scuffs, finish drips, color consistency.

Where UWP fits

UWP does not install — we’re a mill, not a contractor. But we work with installers every day, see their finished work, and can point you toward people who consistently deliver. Bring your project to the Tanner Rd yard with photos of the stair, and we’ll suggest installers we trust for your specific job.

Related products at UWP

Related questions

Terms on this page

Still picking? Email us with the details — stair height, run depth, existing stair condition — and we’ll tell you what we’d actually spec.

Ask the Houston team

Published 2026-05-27