Spec drawing
UW-HOL166344-LSB
HOL166344 — One tall rectangle, 20-3/4" long · 1/2" Square × 44"
Iron Balusters · 1/2" Hollow Square
UW-HOL166344-LSBSingle Rectangle Hollow Iron Baluster
Order # 4100208
- Low Sheen Black
Low Sheen Black — a flatter, lower-gloss black than satin. Keep shoes and fasteners in the same finish.
- Order #4100208
- FinishLow Sheen Black
- End shape1/2" Square
- Length44"
- Lead timeConfirmed at quote
A 1/2" hollow square iron baluster with one tall rectangular panel, 44" long, in Low Sheen Black. The modern rectangle: geometric and light, it gives a run architectural rhythm without ornament.
Everything on one card
- FinishLow Sheen Black (LSB)
- MaterialHollow iron
- End shape1/2" hollow square top & bottom
- Length44"
- Center detailOne tall rectangle, 20-3/4" long
- MountingEpoxy-set (UW-EPOXY)
- Pairs with1/2" sq flat shoe, rake shoe
- UseInterior wood-stair balustrade
- Lead timeConfirmed at quote
- Minimum order1 piece
- WarrantySee Stair Parts warranty
Order these together
A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.
- UW-EPOXY
Baluster Epoxy
Sets the baluster in the tread and handrail.
View part → - UW-ALM06-LSB
1/2" Square Flat Shoe — Low Sheen Black
Use at the bottom of each baluster on level runs, landings, and level rail sections.
View part → - UW-ALPSH02-LSB
1/2" Square Rake Shoe — Low Sheen Black
Use at the bottom of each baluster on the rake. The shoe covers the angled cut at the stair pitch.
View part →
The single rectangle
for modern geometric runs.
One tall rectangle keeps the rail geometric and restrained.
Alternating runs
Alternate with the plain hollow square for a light geometric pattern.
Modern-transitional homes
Pairs with square newels, black hardware and simple baseboards.
Balcony sections
Holds up well on level guard runs seen straight-on.
Remodel upgrades
A restrained upgrade from plain wood balusters to black iron.
Answers, before you ask
- What size is this baluster?
- 1/2" square hollow iron, 44 inches overall before jobsite trimming. The rectangle is 20-3/4" long, with 8" of straight bar above it and 15-1/4" below.
- Which finish should I order?
- This shape is cataloged in Low Sheen Black — a flatter black than satin. Keep the shoes in Low Sheen Black so the hardware reads as one finish.
- How is it installed?
- Trim to length and epoxy-set into the tread and rail, or use the concealed baluster fastener on open treads and level runs. Shoes cover the cut at the bottom.
- What is the lead time?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- Do you show pricing here?
- Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
Questions people ask about iron balusters
Iron vs. wood balusters — which one for my staircase?
Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →What are the IRC stair code rules in plain English?
The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →How do I choose a stair newel post?
A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →Stair terminology glossary — tread, riser, stringer, nosing, and the rest
A staircase has more named parts than most people realize. The tread is the horizontal walking surface; the riser is the vertical board between treads; the stringer is the diagonal structural framing; the nosing is the front lip of the tread; the skirt board is the trim against the wall. Below: every term, plain English, with a note on where each one matters for ordering and installation.
Read the answer →

