Skip to main content
Unique Wood Products

8072 Square Edge Stair Tread

A solid 1" hardwood stair tread finished with a crisp square / lightly eased front edge instead of a bullnose — the modern, architectural look. Edge-glued, never veneered, milled in-house from US domestic hardwood in Red Oak and White Oak.

  • Spec sheet PDF
  • ANSI A shop drawing
  • DXF for CAD
Where it goes & how to measure ↓
Availability
Core catalogTanner Rd, NW Houston
Lead time
Confirmed at quote
Price
From $8442″ × 11-1/2″ red oak, no returns · price your exact size
Sample
Order a sampleHold it before you order

Product views

Section · 8072

The true section — depth across, thickness down, nose at the right. The same closed outline the model above is swept from.

Depth
11 1/2"
Thickness
1"
Length
48"
Nose
Square · eased

Profile

1" × 11-1/2"

  • Square / Eased Edge
  • Solid 1" · 11-1/2" deep
  • Red Oak · White Oak
  • Tanner Rd Yard

Species

Shown as an indication of colour, not a figure sample. Grain and colour vary board to board.

Width & end treatment

Reddish tone, prominent open grain. The standard match for red oak stairs and the most-stocked species. Square ends, eased front edge. The most common stocked width for standard stairs.

Profile
Square / Eased Edge
Thickness
1"
Depth
11-1/2"
Nose
Eased edge
Category
Square / Eased Edge Treads
Species
Red Oak · White Oak
Sold by
The piece
SUBMITTAL DOCUMENTSDrawn for 8072RO48

Sheets are marked preliminary. UWP confirms availability, species and lead time before release.

Need a non-stock species, a curved stair, or a length we don't stock? Our mill custom-runs and templates to spec — see Custom Stair Treads.

Order number

8072RO48

UWP hardwood tread profiles stacked in-house, showing their grain and return details.

Crafted in-house · NW Houston / Tanner Rd

Custom stair work, up close.

Explore photographs of UWP treads, curved details, and custom fabrication.

See our stair work
Where this tread goes

One solid board
from riser to riser.

A straight stair is the same rectangle over and over: 1" solid hardwood sitting on the riser, with the eased edge running 1-1/4" past the riser face. Here is how it sits, and the two numbers you need to order it.

  1. Length, along the nose

    Closed stair: measure skirt board to skirt board. Open side: measure to the outside face of the stringer and add a returned end — the 1-1/4" piece that wraps the nose around the end.

  2. Depth, nose to back

    Riser face to riser face, plus the 1-1/4" nose. Most stairs land at 11-1/2", the stocked depth; deeper runs are cut to order.

  3. Same board, two fronts

    The 8070 full bullnose and the 8072 square / eased edge share the same 1" body. Match the profile to the rest of the stair and the landing it meets.

  4. Open side? Return the end

    Where the stair has no wall on one side, the tread runs 1-1/4" past the stringer and a returned end carries the nose around the corner — no raw end grain shows. Stocked 8070 returned treads are reversible.

How a solid stair tread sits on the stair, and how to measure for oneSection through two steps of a stair showing 1 inch solid treads sitting on the risers with the nose running 1-1/4 inch past the riser face. A plan view below shows one tread with its length measured along the nose, its depth from nose to riser, and a returned end wrapping the nose around the open end.SECTION · THE TREAD ON THE STAIRSolid 1" hardwood on the riser; the eased edge runs 1-1/4" past the riser face.11-1/2" deepnose to riser face1"thick1-1/4" past the riserriserDrawn to scale · 7-1/2" rise · 10-1/4" run · 1-1/4" nosingPLAN · HOW TO MEASURETwo numbers: length along the nose, depth from nose to the riser behind.wall1-1/4" returned endwraps the nose around the open end48" · length along the nose11-1/2"deepClosed stair: measure skirt board to skirt board for the length.Open side: measure to the outside of the stringer, then add the 1-1/4" returned end.Depth: riser face to riser face, plus the 1-1/4" nose. Most stairs land at 11-1/2".THE RETURNED END · OPEN STAIRCASEOne side of the stair meets a wall; the other is open, so that end shows.The returned end wraps the nose round the open end so no raw board end shows.1 · FROM ABOVEWALL SIDEclosed endcut square,butts the skirtBACKsits against the riser — the upright board of the step aboveFRONT · THE NOSEthe rounded edge you step overoutside face of the stringer(the board the treads sit on)1-1/4"OPEN SIDEno wall — you can seethis end of every stepreturned enda 1-1/4" piece with the samenose, fixed to the end so thenose turns the corner andthe raw board end is hidden.It runs 1-1/4" past the back,behind the riser above.2 · STANDING BESIDE THE OPEN SIDEThe same tread seen from the room, looking at its open end.FRONT · THE NOSE← the tread carries on to the wall sideBACK · against the riserOPEN SIDEthe returned endthe same nose, wrappedround the corner — no rawend of the board showingMeasure: wall to the outside face of the open stringer, plus the 1-1/4" returned end.Reversible: flip the tread over and the returned end swaps to the other side.Stocked 8070 / 8072 returned treads: 48" and 60", reversible.
Top: section through two steps — 1" solid treads on the risers, nose 1-1/4" past the riser face. Middle: one tread in plan with length along the nose and depth to the riser. Bottom: the returned end on an open staircase.
Risers · the upright board

The board you see,
not the one you step on.

A riser is the upright board that closes each step. It stands on the tread below, the tread above sits on it, and the tread's nose hangs 1-1/4" past its face. Every step has one, and a flight has one more rise than it has treads.

  1. Pick painted or stained

    Most staircases run a painted white riser under a stained tread — that is the primed 1/2" piece. For a riser in the same wood as the tread, use 3/4" hardwood S4S from the yard in Red Oak, White Oak, Maple or Hickory and stain it with the treads.

  2. Measure the rise

    Top of one tread to the top of the next, on three steps of the flight. Stock is 7-1/2" tall, which is more than any residential rise leaves showing once the tread sits on it, so the riser is ripped down to fit on site — never built up.

  3. Measure the width

    Skirt to skirt across the step, at the back where the riser sits. On an open side, to the finished face of the stringer. Measure the top, middle and bottom steps.

  4. Count the rises, not the treads

    A flight has one more rise than treads. Each 90" primed piece cuts into 2 risers for any stair up to 44" wide; wider than that, count one piece per rise. Hardwood S4S comes in random lengths — give us the count and the width and the yard pulls boards to yield it.

  5. It goes in before the tread

    The riser is fitted first and the tread lands on it, nose 1-1/4" proud of the riser face. A small cove or bull nosing from the stair-moulding line covers the joint between them.

THE RISER · SECTION THROUGH TWO STEPSSeen from the side. The riser stands on the tread below; the tread above sits on it.stringertread belowTHE RISERstands on the tread belowthe tread above sits on it3/4"hardwood · 1/2" primed also fitstread above1-1/4"nose past the riser faceTHE RISEtread top to tread topwhat your tape readsTHE PRIMED PIECE · 1/2" × 7-1/2" × 90"riser 1riser 2one cut90" long7-1/2" tallTwo risers per piece for any stair up to 44" wide. Wider than that, one riser per piece.
Two ways to buy a riser
Primed white riserHardwood S4S riser
Size1/2" thick × 7-1/2" tall3/4" thick × 7-1/2" tall
Length90" long — usually two standard risers per pieceRandom lengths as the yard has them — cut to the width of each step on site
SpeciesPaint-grade, primed whiteRed Oak · White Oak · Maple · Hickory
FinishReady for your topcoatUnfinished, surfaced four sides — stain to match the treads
Sold asBy the 90" pieceBy the board, from the yard
Best forThe classic painted riser under a stained tread — and the retro-fit overlay, thin enough to cap an existing riser without moving the nose.A stained riser that matches the tread species, or a painted riser in solid wood on a new build.

Hardwood S4S lengths and species on hand are the yard's day-to-day stock — confirmed at quote. See hardwood S4S & S3S for the dimension-stock program.

Worked count

A straight flight of 12 treads has 13 rises — one more than the treads, because the first rise is from the floor to the first tread and the last is up onto the landing. On a stair 42" wide, each primed piece cuts into 2, so order 7 primed pieces. In hardwood S4S, tell us 13 risers at 42" and the yard pulls the boards to yield it.

Top: section through two steps — the riser standing on the tread below with the tread above on it, the nose 1-1/4" past the riser face, the rise dimensioned tread top to tread top. Below: the 90" primed piece cut into two risers.
Choosing your species

Match the floor and the stair disappears.

A staircase reads best when the treads match the floor they meet. Species is chosen for tone, not just hardness — pick the one closest to your flooring and the stair disappears into the room.

Images simulate a water-clear matte coat to show natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Core catalog
Janka Hardness1,290 lbf

Pairs with — Medium-tone floors with a warm, slightly pink-red cast — the default for red oak flooring in most American homes.

Representative White Oak wood grain under a clear matte finish

White Oak

Core catalog
Janka Hardness1,350 lbf

Pairs with — Lighter, cooler floors — white oak, natural, wire-brushed, and modern light finishes. Reads warm-tan, not pink.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Made to order
Janka Hardness1,450 lbf

Pairs with — Pale, clean, contemporary floors where an even, near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Made to order
Janka Hardness1,820 lbf

Pairs with — Rustic and character-grade floors with high light-to-dark contrast.

Representative Walnut wood grain under a clear matte finish

Walnut

Made to order
Janka Hardness1,010 lbf

Pairs with — Dark, rich floors and high-end interiors where a deep chocolate tone is the statement.

Not sure which to match?

Send a sample of your floor — we'll species-match the run.

Specifications

The full spec sheet. For the builder who scrolled this far.

Thickness1" solid (fixed)
Depth11-1/2"
Width42" · 48" · 60"
ConstructionEdge-glued solid — never veneered
Edge profileSquare / lightly eased
Stocked speciesRed Oak · White Oak
SurfaceUnfinished, sanded
UseInterior stair treads
Lead timeConfirmed at quote
Minimum order1 piece
OriginUS domestic hardwood · milled in-house
Custom runsAny species, length, curve, template
Popular wood species

The species we run most.

Red Oak and White Oak are core catalog species; the rest are made to order. Current material availability is confirmed on the quote. Janka hardness is listed for reference—every species here is solid, edge-glued, and refinishable.

Red Oak
Core catalog
Hardness
1290 lbf
Color & appearance
Light-to-medium brown with a reddish cast; stains slightly pink.
Grain & texture
Bold, prominent grain lines with occasional swirl.
White Oak
Core catalog
Hardness
1350 lbf
Color & appearance
Light-to-medium brown with an olive, not pink, cast.
Grain & texture
Medium-to-coarse, slightly open structure.
Hard Maple
Made to order
Hardness
1450 lbf
Color & appearance
Creamy white to light reddish-brown; clean and modern.
Grain & texture
Mostly straight, sometimes wavy; fine, even texture.
Hickory
Made to order
Hardness
1820 lbf
Color & appearance
Creamy lights against rich browns; rustic and striking.
Grain & texture
Coarse, pronounced, high-contrast figure.
Walnut
Made to order
Hardness
1010 lbf
Color & appearance
Deep, luxurious chocolate tones; warm and refined.
Grain & texture
Fine-to-medium grain, smooth and elegant.

These are the species that match or complement common hardwood flooring. Running the stair in the same species as the floor keeps grain and tone consistent, so the staircase reads as a deliberate extension of the room rather than a separate part.

Want the full picture — Janka hardness, tone, grain, and the species we source to order? Read the complete wood species guide →

Why solid hardwood

Built to outlive the renovation.

No engineered cores, no veneer, no compromises — the reasons a solid UWP tread is still there decades after the trends move on.

  • Solid, never veneered

    Full-thickness hardwood the whole way through — not a veneer skin over a cheap core. What you sand into is more of the same wood.

  • Refinishable for decades

    Sand and recoat it many times over its life. A solid tread outlasts the carpet, the paint, and usually the renovation that put it in.

  • North American hardwood

    North American hardwood, milled in-house for a short supply chain and a solid-wood result without imported-veneer surprises.

  • Warm & quiet underfoot

    Solid wood absorbs footfall and holds room temperature — none of the cold, hollow click of tile, stone, or hollow-core treads.

Why the 8072

A crisp square edge
for a modern stair.

Same solid 1" body as the 8070 — the difference is the front edge. Square / eased reads contemporary and architectural where a bullnose would read traditional.

  • Modern interiors

    The clean front edge suits contemporary and minimalist stairs where a rounded nose would look dated.

  • Commercial & rental

    A simple, durable square-edge tread that is fast to fabricate and easy to match across a project.

  • Mixed stair systems

    Pairs with square-profile risers and nosing for a consistent crisp-edged staircase.

  • Match an existing run

    Replacing square-edge treads on an older stair? We run 8072 to match what's already there.

Frequently asked

What builders actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

How is the 8072 different from the 8070?
Identical solid 1" body and depth — the only difference is the front edge. 8070 is a full bullnose (rounded); 8072 is a square edge, lightly eased to take the sharpness off. Same price either way.
Are these solid wood or veneered?
Solid hardwood, edge-glued for dimensional stability — never veneered. A full 1" thick across the whole tread.
Which species and sizes are stocked?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Can I get a width or species outside the catalog matrix?
Yes — non-standard widths, additional species, curved, pie-shaped, and on-site templated treads are reviewed as custom work. The configurator creates a planning estimate; UWP confirms the fabrication specification and final quote.
Do you show pricing here?
Not on this reference page. Pricing is returned instantly in the configurator for your exact species, size, and quantity.
Pickup or delivery?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
All answers →