Moulding family
Panel Mould
298 profiles · 1 stocked at Tanner Rd · 291 milled to order
Panel mould is small stock with a big effect. Mitred into rectangles on a flat wall it makes a wainscot; run around a ceiling grid it makes a coffer; framed under a chair rail it makes the whole elevation. Because it is applied rather than structural, it is the one moulding a trim carpenter lays out on paper first: panel width, stile width and the gap to the rail all have to divide the wall evenly, and the profile is chosen last.
Most of the 291 profiles here are between 1″ and 2-1/4″ on the face, in the same style families as the crown and casing so a room can be trimmed in one language. Traditional and Victorian ogees dominate; the plainer coves and beads are what the Shaker and transitional rooms want. Milled to order in paint-grade or solid hardwood, sold by the profile and cut to the run.
Narrow the 298 profiles by style (4), face height (8) below, or use the catalogue's finder for a SKU.
Narrow it down

Panel Mould
3/4" × 1-1/4"
Special orderView profile →
Panel Mould
13/16" × 1-5/16"
Special orderView profile →
Panel Mould
1-7/16" × 1-1/4"
Special orderView profile →
Panel Mould
11/16" × 1-1/8"
In stockView profile →
Panel Mould
1-1/4" × 2"
Special orderView profile →
Panel Mould
13/16" × 1-5/16"
Special orderView profile →
Panel Mould
5/8" × 1-1/2"
Special orderView profile →
Panel Mould
1-1/4" × 1"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.545"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 3/4"
Milled to orderView profile →
Panel Mould
1" × 1/2"
Milled to orderView profile →
Panel Mould
3/4" × 3/4"
Milled to orderView profile →
Panel Mould
1" × 5/16"
Milled to orderView profile →
Panel Mould
3/4" × 7/16"
Milled to orderView profile →
Panel Mould
3/4" × 9/16"
Milled to orderView profile →
Panel Mould
3/4" × 11/16"
Milled to orderView profile →
Panel Mould
1" × 5/16"
Milled to orderView profile →
Panel Mould
1" × 7/8"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 5/8"
Milled to orderView profile →
Panel Mould
1" × 0.667"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 11/16"
Milled to orderView profile →
Panel Mould
1" × 5/16"
Milled to orderView profile →
Panel Mould
1" × 3/8"
Milled to orderView profile →
Panel Mould
1" × 7/16"
Milled to orderView profile →
Panel Mould
1" × 11/16"
Milled to orderView profile →
Panel Mould
1" × 7/16"
Milled to orderView profile →
Panel Mould
1" × 3/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.658"
Milled to orderView profile →
Panel Mould
1" × 0.406"
Milled to orderView profile →
Panel Mould
1" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 0.582"
Milled to orderView profile →
Panel Mould
1-1/4" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.486"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.556"
Milled to orderView profile →
Panel Mould
1-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 7/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-3/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 9/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.477"
Milled to orderView profile →
Panel Mould
1-1/2" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 5/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.717"
Milled to orderView profile →
Panel Mould
1-1/2" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.614"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 5/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1"
Milled to orderView profile →
Panel Mould
1-3/4" × 11/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 5/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.654"
Milled to orderView profile →
Panel Mould
1-3/4" × 0.807"
Milled to orderView profile →
Panel Mould
1-3/4" × 1/2"
Milled to orderView profile →
Panel Mould
1-3/4" × 11/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
2" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 7/8"
Milled to orderView profile →
Panel Mould
2" × 0.8"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2" × 0.8"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-15/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.728"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 15/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-5/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 0.769"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.926"
Milled to orderView profile →
Panel Mould
2-3/4" × 1.048"
Milled to orderView profile →
Panel Mould
2-3/4" × 0.72"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.797"
Milled to orderView profile →
Panel Mould
2-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
3-1/2" × 1-5/16"
Milled to orderView profile →
Panel Mould
3" × 1-7/16"
Milled to orderView profile →
Panel Mould
3-1/4" × 1-15/16"
Milled to orderView profile →
Panel Mould
3-3/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 0.852"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.844"
Milled to orderView profile →
Panel Mould
1-1/4" × 1"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1" × 1."
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 15/16"
Milled to orderView profile →
Panel Mould
2" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 3/4"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 1-1/4"
Milled to orderView profile →
Panel Mould
2" × 1-9/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-1/8"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-7/16"
Milled to orderView profile →
Panel Mould
2" × 1-5/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 15/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-5/16"
Milled to orderView profile →
Panel Mould
2" × 7/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 1.296"
Milled to orderView profile →
Panel Mould
2" × 1-3/4"
Milled to orderView profile →
Panel Mould
2" × 1-7/16"
Milled to orderView profile →
Panel Mould
2" × 1-1/4"
Milled to orderView profile →
Panel Mould
2" × 1-3/16"
Milled to orderView profile →
Panel Mould
2" × 1-3/8"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.59"
Milled to orderView profile →
Panel Mould
2-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
2" × 0.839"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 0.556"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 1-9/16"
Milled to orderView profile →
Panel Mould
2-1/2" × 1-3/8"
Milled to orderView profile →
Panel Mould
3-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
3" × 0.782"
Milled to orderView profile →
Panel Mould
3-1/4" × 0.8"
Milled to orderView profile →
Panel Mould
3" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 7/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.789"
Milled to orderView profile →
Panel Mould
1-1/4" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
2-1/2" × 0.705"
Milled to orderView profile →
Panel Mould
2-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 0.594"
Milled to orderView profile →
Panel Mould
2" × 1-1/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 1.044"
Milled to orderView profile →
Panel Mould
1-3/4" × 5/8"
Milled to orderView profile →
Panel Mould
2-1/2" × 1"
Milled to orderView profile →
Panel Mould
1-3/4" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 0.469"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.682"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.662"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1.543"
Milled to orderView profile →
Panel Mould
1-1/4" × 11/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 0.673"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.614"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/8"
Milled to orderView profile →
Panel Mould
2" × 1.346"
Milled to orderView profile →
Panel Mould
1-1/2" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/2"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 13/16"
Milled to orderView profile →
Panel Mould
2" × 1-3/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.905"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.705"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.417"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.682"
Milled to orderView profile →
Panel Mould
3" × 1.281"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 1/2"
Milled to orderView profile →
Panel Mould
1-1/2" × 1-1/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.844"
Milled to orderView profile →
Panel Mould
2" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 0.4"
Milled to orderView profile →
Panel Mould
2" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.717"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 1-1/16"
Milled to orderView profile →
Panel Mould
1" × 7/16"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1" × 5/16"
Milled to orderView profile →
Panel Mould
2" × 3/4"
Milled to orderView profile →
Panel Mould
2" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/4" × 9/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.556"
Milled to orderView profile →
Panel Mould
1-3/4" × 9/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-1/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 11/16"
Milled to orderView profile →
Panel Mould
1" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 7/16"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
3/4" × 0.477"
Milled to orderView profile →
Panel Mould
2-3/4" × 1-3/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 0.538"
Milled to orderView profile →
Panel Mould
1" × 1/2"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.767"
Milled to orderView profile →
Panel Mould
2-3/4" × 7/8"
Milled to orderView profile →
Panel Mould
2" × 0.8"
Milled to orderView profile →
Panel Mould
2-1/4" × 11/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 15/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 0.844"
Milled to orderView profile →
Panel Mould
1-1/2" × 3/4"
Milled to orderView profile →
Panel Mould
2" × 0.903"
Milled to orderView profile →
Panel Mould
2-1/2" × 1-1/4"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.409"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.818"
Milled to orderView profile →
Panel Mould
1-1/4" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 9/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-3/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 1-1/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 1.343"
Milled to orderView profile →
Panel Mould
2" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 15/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 7/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 1/2"
Milled to orderView profile →
Panel Mould
1-1/2" × 7/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 13/16"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 1-1/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 3/4"
Milled to orderView profile →
Panel Mould
1-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
4-1/4" × 1-9/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1"
Milled to orderView profile →
Panel Mould
1-1/4" × 15/16"
Milled to orderView profile →
Panel Mould
1" × 11/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.682"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-3/8"
Milled to orderView profile →
Panel Mould
1-3/4" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/4" × 1-3/16"
Milled to orderView profile →
Panel Mould
2-3/4" × 1-1/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.417"
Milled to orderView profile →
Panel Mould
1" × 9/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 11/16"
Milled to orderView profile →
Panel Mould
1-3/4" × 1-1/16"
Milled to orderView profile →
Panel Mould
1" × 13/16"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.477"
Milled to orderView profile →
Panel Mould
2-1/4" × 1-1/8"
Milled to orderView profile →
Panel Mould
1-1/4" × 0.59"
Milled to orderView profile →
Panel Mould
1" × 0.844"
Milled to orderView profile →
Panel Mould
1-3/4" × 0.743"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
2-1/4" × 13/16"
Milled to orderView profile →
Panel Mould
3/4" × 0.682"
Milled to orderView profile →
Panel Mould
3" × 0.682"
Milled to orderView profile →
Panel Mould
1" × 0.652"
Milled to orderView profile →
Panel Mould
2-1/4" × 1.285"
Milled to orderView profile →
Panel Mould
3-1/2" × 1.844"
Milled to orderView profile →
Panel Mould
2" × 7/8"
Milled to orderView profile →
Panel Mould
1-1/2" × 0.587"
Milled to orderView profile →
Panel Mould
3" × 1-5/16"
Milled to orderView profile →Terms used on this page
Questions people ask before ordering
Wainscoting styles — beadboard, shiplap, board-and-batten, raised panel. Which one for my room?
Wainscoting is wall paneling that covers the lower 30 to 48 inches of a wall. Five main styles: beadboard (narrow vertical strips with bead detail), shiplap (horizontal overlapping boards), board-and-batten (flat panels with vertical battens), flat-panel (simple recessed squares), and raised-panel (formal beveled panels). Pick on home style — beadboard for farmhouse, shiplap for coastal, raised panel for traditional formal.
Read the answer →What trim goes where? A room-by-room guide.
Trim choice should read as a consistent system across the house, not a room-by-room patchwork. Baseboard and casing run everywhere, sized to ceiling height and door scale. Crown is reserved for formal rooms in traditional homes and skipped in modern ones. Chair rail and panel mould go in formal dining and entry. Stair trim ties the upstairs and downstairs together.
Read the answer →Crown vs. cove moulding — what’s the difference and which one do I need?
Crown moulding is sprung — it sits at an angle bridging the wall and ceiling, with an ornate profile that can include curves, beads, and steps. Cove moulding is a single concave curve, sitting flat into the wall-ceiling corner. Crown reads as traditional and substantial; cove reads as clean and quieter. For 8-foot ceilings, cove or small crown. For 9-foot+, scale up.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

