Skip to main content
Unique Wood Products

UW12280 Transitional Panel Mould

1-1/4" x 0.417" — milled to order in Houston. Any species; ground to match an existing profile on request.

  • Dimensioned section
  • ANSI A shop drawing
  • DXF for CAD
Availability
Made to order
Lead time
7–14 days
Price
Priced by the linear foot on your quoteRequest a quote
Sample
Order a sampleHold it before you order

Dimensions are nominal. Milled profile is held to ±1/64″ and length to ±1/16″ — tolerances and how each is measured. Hold a sample before you commit a run.

LIVE MODEL
Species
White Oak
Width
1-1/4"
Thickness
7/16"
Order code
UW12280-125
TRANSITIONAL · PANEL MOULD · MILLED TO ORDER

White Oak · 1-1/4" × 7/16"

Panel Mould · Ogee · Plain

ORDER CODE

UW12280-125

quoted by the linear foot

  • Ogee
  • Cove
  • Bead
  • Chamfer

Specify this profile

Wood species

White Oak

Colour is indicative — grain and colour vary board to board.

Others on request — send us a sample or an offcut and we will match it.

Dimensions

1-1/4" × 7/16"

One knife, 1 width. Length is a quantity — quoted by the linear foot.

Width
Thickness
7/16"FIXED

Your specification

UW12280-125
Order code
UW12280-125
Profile
Transitional Panel Mould · Panel Mould
Species
White Oak
Section
1-1/4" width × 7/16" thick
Sold by
Linear foot · knife on file · setup by footage
Availability
Milled to order · 7–14 days lead time
Finish
Unfinished — site finish by others

The DXF is the finished section, in inches, for drawing reference. To match an existing profile instead, send us a sample or an offcut and we will grind a knife to it. Knife, setup and shop charges are on the custom moulding price schedule.

ORDER CODE

UW12280-125

Installed

Rendered from this profile's own section — the same geometry as the spec sheet and the DXF, not an illustration of something similar.

UW12280 mitred corner
Mitred corner

The wood

Every profile in the library is milled to order, so the species is your choice rather than whatever happens to be on the shelf. These are the five we run most for panel mould — pick one in the swatches above to see this profile in it.

Poplar plank

PoplarPaint-Grade · Most Popular

Janka hardness540 lbf

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Red Oak plank

Red OakStandard

Janka hardness1,290 lbf

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

White Oak plank

White OakCool-Toned

Janka hardness1,350 lbf

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Hard Maple plank

Hard MapleLight & Modern

Janka hardness1,450 lbf

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Walnut plank

WalnutDark & Refined

Janka hardness1,010 lbf

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.

All answers →