Skip to main content
Unique Wood Products

See the panels, before you order.

PANEL LAYOUT · EVEN SPACING · PANEL / RAIL / BASE FEET

One wall, corner to corner.

Floor to top of chair rail.

Spaced evenly across the wall.

Spacing & reveals

Between panels.

Corner to first panel.

Rail to panel.

Base to panel.

Multiplies totals.

Panel work: ~10%.

Optional · blended.

Wall — elevation
4 panels · 10.0′ wide · 36″ wainscot
10.0′ (120″)36″ wainscot26.3″ × 22.0″

Each panel: 26.25″ wide × 22.00″ high. 3.00″ between panels; 3.00″ at each end.

Panels
4
this wall
Panel size
26.3″ × 22.0″
Each, even
Panel moulding
35.4 ft
32.2 exact · order
Chair rail
11.0 ft
Top cap run
Baseboard
11.0 ft
Bottom run
Total moulding (order)
57.4 ft
Includes 10% waste
Breakdown (exact, before waste)
Panel moulding — 4 panels × 8.0′
32.2 ft
Chair rail — 120″ wall
10.0 ft
Baseboard — 120″ wall
10.0 ft

Picture-frame (shadow-box) layout. Panel moulding, chair rail and baseboard are separate profiles — order each by its own SKU.

Panel moulding, milled to spec. UWP runs panel, chair-rail and base profiles across its core material program.

Request a quote →

Even-spacing layout for one wall; corners interrupt panels, so run each wall on its own. Visual is scaled. Field-verify before ordering — final mill list is built per order.

Reference

Laying out panels that look deliberate

How do I space wainscoting panels evenly?
Decide the panel count first, then let the spacing fall out of the wall length — not the other way around. Equal panels with equal gaps read as deliberate; a run of equal panels ending in one narrow panel at the corner reads as a mistake, and it is the single most common wainscot error.
What height should a wainscot be?
Traditionally about one third of the wall height, which puts the chair rail near 32–36" in an 8-foot room. Taller treatments run to 48" or above, but avoid landing the rail exactly halfway up the wall — splitting the wall in two equal parts is the proportion that looks unresolved.
Do the panels have to be the same size on every wall?
The panels should be, as far as possible; the gaps can absorb the difference. Keep panel width consistent around the room and let the spacing vary slightly wall to wall — the eye compares panels to each other, not gaps to each other.
What moulding does a wainscot need?
Three runs: panel moulding for the frames, a chair rail on top, and baseboard below. The calculator totals each separately because they are different profiles at different prices, and estimating them as one number is how a job comes up short on the one that matters most.