Poplar — hardwood for stair treads and millwork
Pale cream with green-brown variation. Best first choice when the final finish is painted.

540 lbf
The softest thing we run. It dents if a ladder leans on it — which is why it belongs on painted walls and casing, not underfoot.
70 · red oak = 100
Indicative of lumber market position — not a UWP quote.
Core catalog · availability confirmed at quote
Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.
What we mill it into
Character
Calm, workable, paint-friendly.
The softest thing we run. It dents if a ladder leans on it — which is why it belongs on painted walls and casing, not underfoot.
Best for
Painted moulding, trim, casing, and custom millwork.
How Poplar behaves in service
Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.
8.2%
Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.
4.6%
Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.
USDA Wood Handbook
Published laboratory constants for the species, not a UWP measurement.
Finishing
Takes paint better than anything else on the rack: fine, even grain and no pores to fill. Under stain the green and purple heartwood streaks show, so it is a paint-grade species by choice, not by limitation.
Machining and fastening
Machines and sands easily and holds a brad without splitting. Soft enough to dent under a dropped tool, which is why it is trim and casing rather than treads.
Closest in hardness
The three species nearest Poplar on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.

