Skip to main content
Unique Wood Products

Alder — hardwood for stair treads and millwork

Warm honey brown. Good for warm interiors with a softer hardwood feel.

Alder grain study
Janka hardnessSoft

590 lbf

Close to poplar. A door, cabinet, and furniture wood — do not put it where feet or carts go.

Cost indexEveryday

106 · red oak = 100

Indicative of lumber market position — not a UWP quote.

Availability

Milled to order · lead time confirmed at quote

Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.

What we mill it into

Character

Soft movement with approachable color.

Close to poplar. A door, cabinet, and furniture wood — do not put it where feet or carts go.

Best for

Decorative millwork and furniture-style trim.

How Alder behaves in service

Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.

Tangential shrinkageModerate movement

7.3%

Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.

Radial shrinkage

4.4%

Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.

Basis

USDA Wood Handbook

Published laboratory constants for the species, not a UWP measurement.

Finishing

Stains evenly to read as cherry or walnut at a fraction of the price, which is most of why it is specified. Darkens little in sunlight.

Machining and fastening

Soft, straight-grained and easy on knives; sands to a fine surface. Dents readily, so it belongs on cabinet faces and casing rather than treads.

Closest in hardness

The three species nearest Alder on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.