Skip to main content
Unique Wood Products

8073 Square Retro-Fit Platform Landing

A renovation overlay for a stair landing — a 5/8" solid hardwood body with a built-up full 1" square / eased front edge that caps an existing landing without tearing it out. The retro-fit, square-edge sibling of the 8072 landing. Never veneered, milled in-house from US domestic hardwood in Red Oak and White Oak. The core catalog size is 48" × 48"; L- and U-shape landings are custom-run.

  • Spec sheet PDF
  • ANSI A shop drawing
  • DXF for CAD
Where it goes & how to measure ↓
Availability
Core catalogTanner Rd, NW Houston
Lead time
Confirmed at quote
Price
From $51448″ × 36″ red oak, no returns · price your exact size
Sample
Order a sampleHold it before you order

Product views

Section · 8073

The true section — depth across, thickness down, nose at the right. The same closed outline the model above is swept from.

Depth
48"
Thickness
1"
Body
5/8"
Nose
Square · eased

Profile

48" × 48" × 5/8"

  • Square Retro-Fit
  • 5/8" + built-up 1" edge
  • Red Oak · White Oak
  • Tanner Rd Yard

Species

Shown as an indication of colour, not a figure sample. Grain and colour vary board to board.

Reddish tone, prominent open grain — the standard match for red oak stairs and the most-stocked species. Stocked 48" × 48" with a 5/8" overlay body and a built-up 1" square / eased front. Caps an existing landing without demolition. Larger, L-shape, and U-turn landings are custom-run to your template.

Profile
Square Retro-Fit
Thickness
5/8" body
Depth
48"
Nose
Built-up square edge
Category
Platform Landings
Species
Red Oak · White Oak
Sold by
The piece
SUBMITTAL DOCUMENTSDrawn for 807348RO48

Sheets are marked preliminary. UWP confirms availability, species and lead time before release.

Need a non-stock species, a curved stair, or a length we don't stock? Our mill custom-runs and templates to spec — see Custom Stair Treads.

Order number

807348RO48

UWP hardwood tread profiles stacked in-house, showing their grain and return details.

Crafted in-house · NW Houston / Tanner Rd

Custom stair work, up close.

Explore photographs of UWP treads, curved details, and custom fabrication.

See our stair work
Where a retro-fit landing goes

Re-deck the landing
without tearing it out.

The landing version of the retro-fit tread: a 5/8" solid hardwood overlay sized to the existing platform, with a built-up 1" eased edge that wraps the edge the lower run meets.

  1. Trim the old nose flush

    Cut the existing edge back square to the riser below it, the same as a retro-fit tread.

  2. Measure the existing landing

    Width skirt to skirt, depth from the back wall to the trimmed front edge. The overlay adds 1-1/4" of nose; stocked at 48" × 48", larger and L / U shapes to template.

  3. Same lip, bigger board

    The body sits flat on the old deck and the lip drops over the edge. Pair it with 8071 / 8073 retro-fit treads to re-do the whole stair in one pass.

  4. Open side? Return the end

    On an open side the overlay runs 1-1/4" past the stringer and a returned end wraps the nose around the edge. Handed — specify left or right.

How a retro-fit landing platform re-decks an existing landingPlan of an L-shaped stair with the landing platform highlighted as an overlay on the existing landing. Below it, a section through the landing edge: the old nose trimmed flush, a 5/8 inch hardwood body on the old deck, and a built-up 1 inch nose wrapping the edge.PLAN · L-SHAPE LANDINGThe overlay re-decks the platform the lower run meets.48" × 48"overlay on the old landingnewelnoseon the edge thelower run meetsUPDrawn to scale · 48"-wide stair · 48" × 48" landing · 11-1/2" treads either sideSECTION · OVERLAY AT THE LANDING EDGEOld nose trimmed flush; 5/8" body on the deck, 1" eased edge caps the edge.11-1/2" overlayexisting 10-1/4" + 1-1/4" nose1"nose1-1/4" nose lip5/8"bodyriserexisting treadold nosetrimmed flushDrawn to scale · existing 1" deck, nose trimmed flush · 5/8" body · 1-1/4" nose runTHE RETURNED END · OPEN STAIRCASEOne side of the stair meets a wall; the other is open, so that end shows.The returned end wraps the nose round the open end so no raw board end shows.1 · FROM ABOVEWALL SIDEclosed endcut square,butts the skirtBACKsits against the riser — the upright board of the step aboveFRONT · THE NOSEthe rounded edge you step overoutside face of the stringer(the board the treads sit on)1-1/4"OPEN SIDEno wall — you can seethis end of every stepreturned enda 1-1/4" piece with the samenose, fixed to the end so thenose turns the corner andthe raw board end is hidden.It runs 1-1/4" past the back,behind the riser above.2 · STANDING BESIDE THE OPEN SIDEThe same tread seen from the room, looking at its open end.FRONT · THE NOSE← the tread carries on to the wall sideBACK · against the riserOPEN SIDEthe returned endthe same nose, wrappedround the corner — no rawend of the board showingMeasure: wall to the outside face of the open stringer, plus the 1-1/4" returned end.Not reversible: it has a top and a bottom — tell us which side is open.Returned retro-fit landings are cut to order — specify the open side.
Top: an L-shaped stair in plan with the overlay on the existing landing. Middle: section through the landing edge — old nose trimmed flush, 5/8" body on the deck, 1" nose wrapping the edge. Bottom: the returned end where a side is open.
Risers · the upright board

The board you see,
not the one you step on.

A riser is the upright board that closes each step, standing between one tread and the next. On a retro-fit, a thin primed riser caps the existing riser the same way the overlay tread caps the old tread — the nose of the new tread hides its top edge. Every step has one, and a flight has one more rise than it has treads.

  1. Pick painted or stained

    Most staircases run a painted white riser under a stained tread — that is the primed 1/2" piece. For a riser in the same wood as the tread, use 3/4" hardwood S4S from the yard in Red Oak, White Oak, Maple or Hickory and stain it with the treads.

  2. Measure the rise

    Top of one tread to the top of the next, on three steps of the flight. Stock is 7-1/2" tall, which is more than any residential rise leaves showing once the tread sits on it, so the riser is ripped down to fit on site — never built up.

  3. Measure the width

    Wall to wall across the step, at the back where the riser sits. On an open side, to the finished face of the stringer. Measure every step; old stairs wander.

  4. Count the rises, not the treads

    A flight has one more rise than treads. Each 90" primed piece cuts into 2 risers for any stair up to 44" wide; wider than that, count one piece per rise. Hardwood S4S comes in random lengths — give us the count and the width and the yard pulls boards to yield it.

  5. Set it before the tread

    Cap the old riser first, then set the overlay tread so its 1-1/4" nose lands over the new riser's top edge. Cove or bull nosing from the stair-moulding line covers the joint below.

THE RISER · SECTION THROUGH A RETRO-FIT STEPSeen from the side. A thin primed riser caps the old riser; the new nose lip hides its top.stringerold riserold tread, nose cut flushoverlay belowTHE RISERprimed, over the old onetucked under the nose lip1/2"primed · 3/4" hardwood also fitsretro-fit tread on top1-1/4"nose lip over the old faceTHE RISEtread top to tread topwhat your tape readsTHE PRIMED PIECE · 1/2" × 7-1/2" × 90"riser 1riser 2one cut90" long7-1/2" tallTwo risers per piece for any stair up to 44" wide. Wider than that, one riser per piece.
Two ways to buy a riser
Primed white riserHardwood S4S riser
Size1/2" thick × 7-1/2" tall3/4" thick × 7-1/2" tall
Length90" long — usually two standard risers per pieceRandom lengths as the yard has them — cut to the width of each step on site
SpeciesPaint-grade, primed whiteRed Oak · White Oak · Maple · Hickory
FinishReady for your topcoatUnfinished, surfaced four sides — stain to match the treads
Sold asBy the 90" pieceBy the board, from the yard
Best forThe classic painted riser under a stained tread — and the retro-fit overlay, thin enough to cap an existing riser without moving the nose.A stained riser that matches the tread species, or a painted riser in solid wood on a new build.

Hardwood S4S lengths and species on hand are the yard's day-to-day stock — confirmed at quote. See hardwood S4S & S3S for the dimension-stock program.

Worked count

A straight flight of 12 treads has 13 rises — one more than the treads, because the first rise is from the floor to the first tread and the last is up onto the landing. On a stair 42" wide, each primed piece cuts into 2, so order 7 primed pieces. In hardwood S4S, tell us 13 risers at 42" and the yard pulls the boards to yield it.

Top: section through a retro-fit step — a 1/2" primed riser over the old riser, the overlay tread's nose hiding its top edge, the rise dimensioned tread top to tread top. Below: the 90" primed piece cut into two risers. Drawn on a stair step. A landing platform has a riser below its nosed edge, measured and cut the same way; the flight above starts from the landing surface.
Choosing your species

Match the floor and the stair disappears.

A landing reads best when it matches the floor and treads around it. Species is chosen for tone, not just hardness — pick the one closest to your flooring and the new landing disappears into the room.

Images simulate a water-clear matte coat to show natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Core catalog
Janka Hardness1,290 lbf

Pairs with — Medium-tone floors with a warm, slightly pink-red cast — the default for red oak flooring in most American homes.

Representative White Oak wood grain under a clear matte finish

White Oak

Core catalog
Janka Hardness1,350 lbf

Pairs with — Lighter, cooler floors — white oak, natural, wire-brushed, and modern light finishes. Reads warm-tan, not pink.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Made to order
Janka Hardness1,450 lbf

Pairs with — Pale, clean, contemporary floors where an even, near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Made to order
Janka Hardness1,820 lbf

Pairs with — Rustic and character-grade floors with high light-to-dark contrast.

Representative Walnut wood grain under a clear matte finish

Walnut

Made to order
Janka Hardness1,010 lbf

Pairs with — Dark, rich floors and high-end interiors where a deep chocolate tone is the statement.

Not sure which to match?

Send a sample of your floor — we'll species-match the run.

Specifications

The full spec sheet. For the builder who scrolled this far.

Body5/8" solid overlay
EdgeBuilt-up 1" square / eased
Stocked size48" × 48"
ConstructionEdge-glued solid — never veneered
Stocked speciesRed Oak · White Oak
SurfaceUnfinished, sanded
UseOverlay on existing landings
Lead timeConfirmed at quote
Minimum order1 piece
OriginUS domestic hardwood · milled in-house
Custom sizesAny size, L/U-shape, template
Depth48" (square)
Popular wood species

The species we run most.

Red Oak and White Oak are core catalog species; the rest are made to order. Current material availability is confirmed on the quote. Janka hardness is listed for reference—every species here is solid, edge-glued, and refinishable.

Red Oak
Core catalog
Hardness
1290 lbf
Color & appearance
Light-to-medium brown with a reddish cast; stains slightly pink.
Grain & texture
Bold, prominent grain lines with occasional swirl.
White Oak
Core catalog
Hardness
1350 lbf
Color & appearance
Light-to-medium brown with an olive, not pink, cast.
Grain & texture
Medium-to-coarse, slightly open structure.
Hard Maple
Made to order
Hardness
1450 lbf
Color & appearance
Creamy white to light reddish-brown; clean and modern.
Grain & texture
Mostly straight, sometimes wavy; fine, even texture.
Hickory
Made to order
Hardness
1820 lbf
Color & appearance
Creamy lights against rich browns; rustic and striking.
Grain & texture
Coarse, pronounced, high-contrast figure.
Walnut
Made to order
Hardness
1010 lbf
Color & appearance
Deep, luxurious chocolate tones; warm and refined.
Grain & texture
Fine-to-medium grain, smooth and elegant.

These are the species that match or complement common hardwood flooring. Running the stair in the same species as the floor keeps grain and tone consistent, so the staircase reads as a deliberate extension of the room rather than a separate part.

Want the full picture — Janka hardness, tone, grain, and the species we source to order? Read the complete wood species guide →

Why solid hardwood

Built to outlive the renovation.

No engineered cores, no veneer, no compromises — the reasons a solid UWP tread is still there decades after the trends move on.

  • Solid, never veneered

    Full-thickness hardwood the whole way through — not a veneer skin over a cheap core. What you sand into is more of the same wood.

  • Refinishable for decades

    Sand and recoat it many times over its life. A solid tread outlasts the carpet, the paint, and usually the renovation that put it in.

  • North American hardwood

    North American hardwood, milled in-house for a short supply chain and a solid-wood result without imported-veneer surprises.

  • Warm & quiet underfoot

    Solid wood absorbs footfall and holds room temperature — none of the cold, hollow click of tile, stone, or hollow-core treads.

Why the 8073

Re-deck a landing
without tearing it out.

The same 5/8" overlay approach as the 8073 retro-fit tread — scaled up to the platform where a staircase turns or meets a floor. The thin body laps over the existing landing while the built-up 1" square / eased front gives a full, finished modern edge.

  • Carpet-to-wood remodels

    Pull the carpet, cap the existing landing — a solid hardwood platform with a crisp modern edge, without rebuilding the framing.

  • L-shape landings

    The quarter-turn platform between two flights, re-decked to match the retro-fit treads above and below.

  • U-turn landings

    The half-turn platform on a switchback stair, custom-run to your exact template.

  • Matched modern stairs

    Species-matched to 8073 square retro-fit treads for one continuous crisp-edged overlay staircase.

Frequently asked

What builders actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

What is a retro-fit platform landing?
An overlay for a stair landing: a 5/8" solid hardwood body with a built-up full 1" square / eased front. It caps an existing landing so you get a solid wood surface — in the contemporary square-edge look — without removing the old landing or rebuilding the framing.
How is the 8073 landing different from the 8072 landing?
The 8072 landing is a full 1" solid platform for new construction; the 8073 landing is a 5/8" overlay that laps over an existing landing, with a built-up 1" square / eased front. Same modern square edge, different application.
Why is the body 5/8" but the edge 1"?
The thin 5/8" body keeps the finished surface low enough to lap over the existing landing without a big height change; the front is built up to a full 1" so the edge still looks and feels like a solid platform.
Are these solid wood or veneered?
Edge-glued solid hardwood, never veneered.
Which species and sizes are stocked?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
Do you show pricing here?
Not on this reference page. Pricing is returned instantly in the configurator for your exact species, size, and shape.
Pickup or delivery?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
All answers →