Skip to main content
Unique Wood Products

Stair parts

Stair Risers

Primed paint-grade · Hardwood S4S · 7.5″ stock height

The riser is the upright board between one tread and the next. It carries no load a tread does not carry first, which is why it is the part of the stair most often painted: a white riser under a stained tread is the classic Houston stair, and it lets the riser be paint-grade while the tread is oak.

The yard stocks risers two ways. A 0.5″ primed riser in 90″ lengths, which cuts into two risers on any stair up to 44″ wide. And a 0.75″ solid hardwood riser, surfaced four sides, in the tread species, for a stained riser or a painted one that has to be solid wood. Both are 7.5″ tall — taller than any residential rise — so they are ripped to the finished rise on site, never built up.

Primed white riser

Thickness
0.5″
Height
7.5″ — rip to the finished rise
Length
90" long — usually two standard risers per piece
Species
Paint-grade, primed white
Finish
Ready for your topcoat
Sold as
By the 90" piece
Will-call code
8075PR-90

Best for: The classic painted riser under a stained tread — and the retro-fit overlay, thin enough to cap an existing riser without moving the nose.

Quote primed risers →

Hardwood S4S riser

Thickness
0.75″
Height
7.5″ — rip to the finished rise
Length
Random lengths as the yard has them — cut to the width of each step on site
Species
Red Oak · White Oak · Maple · Hickory
Finish
Unfinished, surfaced four sides — stain to match the treads
Sold as
By the board, from the yard

Best for: A stained riser that matches the tread species, or a painted riser in solid wood on a new build.

Hardwood S4S — species and pricing →

How many to order

A straight flight has one more rise than it has treads. A stair with 13 treads has 14 rises; at 42″ wide each 90″ primed piece yields 2, so that stair takes 7 pieces. Wider than 44″, a piece yields one riser and the count doubles. For hardwood S4S, add the stair width per rise in linear feet and round up to the board.

On a retro-fit, the thin primed riser caps the existing riser without moving the nosing — pair it with the 8071 retro-fit tread. On a new build the riser goes in before the tread, glued and nailed to the stringer, so the tread can bear on it.

All answers →