Skip to main content
Unique Wood Products

Milled section

UW-6042
UW-6042 — isometric render of the milled section.

Species

Shown as an indication of colour, not a figure sample. Grain and colour vary board to board. Milled to order — other species on request.

Spec drawing
UW-6042 6042 Plowed Stair Handrail — profile cross-section with dimensions.

6042 — dimensioned cross-section

Handrails · Plowed Profile

UW-60426042 Plowed Stair Handrail

1¾" × 2¾" · flat top · plowed underside

Flat-top handrail with a routed plow on the underside for receiving square wood balusters (UW-5060, UW-5360) between the newels. The dominant rail for plowed traditional baluster systems. Offered in Red Oak and White Oak in 8, 12 and 16 foot lengths.

  • 1¾" × 2¾" · flat top · plowed underside
  • 1¾" × 2¾"
  • 8′ · 12′ · 16′
  • Confirmed at quote
Availability & MaterialsUW-6042
Quote reviewedCore catalog item · confirm current availability
Red Oak
3 lengths · 8′–16′
CodeUW-6042
Choose wood species

The default species — Oak. Grain reads cleanly under stain or clear finish; ordered in and with timing confirmed at quote. Carried in 8′, 12′, and 16′.

Lengths & CSD CodesRed Oak
Office orders by CSD #
1

Choose an exact length above before adding this handrail to the Quote List.

Call for a quote · (713) 462-5045 · Tanner Rd Yard Download spec sheet (PDF)

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-6042
Species
Red Oak
Material
Solid hardwood, finger-jointed
Family
Handrails
Profile
1¾" × 2¾" · flat top · plowed underside
Lengths
8′ · 12′ · 16′
Mounting
Top-mount on newels; plowed underside takes square balusters
Pairs with
UW-5015/5342 turned balusters · UW-5060/5360 square (plowed only) · UW-4015/4040 pin-top newels
Use
Interior wood-stair handrail · Colonial / traditional
Lead time
Confirmed at quote
Minimum
1 piece
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-6042

6042 Plowed as the running rail on traditional wood-baluster stairs.

6042 Plowed Stair Handrail — 1¾" × 2¾" · flat top · plowed underside. Used as the running rail across straight wood-baluster runs. Field-cut to length; mitered or hand-fitted at the landing newel.

  • Colonial / traditional stairs

    The 6000-series profiles are the dominant Colonial running rails. Pair this profile with matched pin-top newels and the 5000-series balusters for a coherent system.

  • Mixed turned + square infill

    Use with UW-5060/5360 square balusters for the standard residential layout.

  • Long stair runs

    Carried in 8, 12 and 16 ft. Longer runs are field-joined; coordinate with the Tanner Rd yard for splice prep.

  • Curved or radiused stairs

    For curved runs, see the bending-rail variants on the catalog page — no bending stock is listed for the 6042, so curved runs are quoted from field measurements.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • Profile drawing
    UW-5015

    5015 Turned Wood Baluster

    The dominant Colonial baluster — sits beneath this handrail on a turned-baluster system.

    View part →
  • Profile drawing
    UW-4015

    4015 Pin-Top Landing Newel

    Matched pin-top newel that receives a 6000-series handrail at the landing.

    View part →
  • Profile drawing
    UW-4040

    4040 Pin-Top Starting Newel

    Starting newel for the bottom of the run — same Colonial language as this rail.

    View part →
Frequently asked

What contractors actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

01What handrail height is code-compliant?

IRC R311.7.8 requires the top of the handrail be 34"–38" above the nosing of the treads. UW-6042 mounts on top of the balusters/newels; size your baluster + tread combination so the rail top falls in that range.

02What species can UW-6042 be ordered in?

Red Oak and White Oak are ordered in and with timing confirmed at quote. Maple and Poplar milled to order with timing confirmed at quote. Specify species at quote time.

03How is UW-6042 mounted?

Top-mount: rail sits on top of pin-top newels and balusters. Joinery at the newel is either hand-mitered or via a rail-bolt connection (UW supplies the bolt kit).

04What is the lead time?

Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

05Do you show pricing here?

Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

All answers →