Straight or curved run?
Use standard or plowed rail for straight runs. Use a matched bending system when the rail must follow a radius.
Start with the rail head and underside condition. Each profile page brings dimensions, species, listed lengths, and application notes into one clear view.

UWP's primary Colonial profile for straight-run, top-mount stair systems. Offered in Red Oak, White Oak, and Poplar.
Special order2¼″ × 2⅜″ · 8′–20′
Red Oak · White Oak · Poplar

A distinct alternative to the 6010 for straight-run, top-mount installations. Red Oak and White Oak, special order.
Special orderFive listed lengths · 8′–20′
Red Oak · White Oak

Wider 2¾″ stock scaled for taller stairs, oversized newels, and commercial-grade installations.
Special order2¾″ × 2¾″ · 8′–20′
Red Oak

Flat-top rail with a routed underside for square wood balusters.
Special orderRed Oak · White Oak · 8′ / 12′ / 16′
Red Oak · White Oak

The familiar 6010 Colonial head with an underside plow for square-baluster systems.
Special orderRed Oak · 8′ / 12′ / 16′
Red Oak

Round wall rail on a flat base, bracket-mounted against the wall instead of carried on balusters. Matched fittings are UW-7023 and UW-7025.
Special order1¾″ round grip · 8′–20′
Red Oak · Maple · Hemlock

A low flat handrail, 2-1/4" wide × 1-1/4" tall, in oak and hemlock.
Special order2-1/4" × 1-1/4"
Red Oak · Hemlock

A wide flat-top handrail, 2-3/4" × 1-5/8", in oak and white oak — a heavier rectangular rail than the UW-6002.
Special order2-3/4" × 1-5/8"
Red Oak · White Oak

A low, wide profiled handrail, 2-5/8" × 1-5/8", in oak and white oak, 8′ to 20′.
Special order2-5/8" × 1-5/8"
Red Oak · White Oak

A tall profiled handrail, 2-5/8" wide × 3" high, in oak, 16′.
Special order2-5/8" × 3"
Red Oak

A rounded mushroom-top handrail, 2-1/4" × 2-3/8", in hemlock, 16′ — paint- or stain-grade softwood.
Special order2-1/4" × 2-3/8"
Hemlock

The 6210 handrail head with a plowed underside for square balusters, in oak and white oak.
Special order2-5/8" × 2-3/8"
Red Oak · White Oak

A plowed shoe rail, 2-1/4" × 1-1/4", in hemlock, 12′ — runs along the floor or stringer and takes square balusters in its plow.
Special order2-1/4" × 1-1/4"
Hemlock

The 6010 profile as laminated bending rail for curved stairs — standard bending rail 12′–20′, super radial rail for tight curves, and bending mould to trim the curve.
Special order2-1/4" × 2-3/8"
Red Oak · White Oak

The 6210 profile as laminated bending rail for curved stairs, with a super radial rail for tight curves and bending mould.
Special order2-5/8" × 2-3/8"
Red Oak · White Oak

The wider 6710 profile as laminated bending rail for curved stairs, with a super radial rail and bending mould.
Special order2-3/4" × 2-3/4"
Red Oak

The 6003 profile as laminated bending rail for curved stairs, in oak, 12′, 16′ and 20′.
Special order6003 profile
Red Oak

The 684 profile as laminated bending rail for curved stairs, in white oak, 12′, 16′ and 20′.
Special order2-5/8" × 1-5/8"
White Oak

Modern slab milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order2" × 1⅛" · ploughed 1¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern bullnose milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order2" × 1⅜" · ploughed 1¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern recessed slab milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2" × 2½" · ploughed 1¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Traditional mushroom milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2½" × 3⅛" · ploughed 1¾"
Red Oak · White Oak · Hickory · Maple · Walnut

Traditional beaded mushroom milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2⅝" × 3¼" · ploughed 1¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern wall rail milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order1¼" × 2"
Red Oak · White Oak · Hickory · Maple · Walnut

Transitional coved cap milled on our own knives. A cap rail — pair it with a graspable profile where code requires one.
Special order2⅝" × 1⅝"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern i-section milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2⅜" × 2¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Traditional bell milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2⅝" × 2¼"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern slim bar milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order2" × 1-1/32"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern octagon milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order1⅞" × 1½"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern hexagon milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order2" × 1⅜"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern octagon milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order2" × 1½"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern faceted dome milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order1⅞" × 1½"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern faceted crest milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order1⅞" × 1½"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern faceted taper milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type I with margin.
Special order1¾" × 1½"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern faceted bell milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2½" × 2"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern faceted crown milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2⅜" × 2"
Red Oak · White Oak · Hickory · Maple · Walnut

Modern squared cap milled on our own knives, dimensioned to clear IRC R311.7.8.3 as Type II with margin.
Special order2½" × 1¾"
Red Oak · White Oak · Hickory · Maple · Walnut
Special order · Tanner RdCurved Stair SystemLaminated rail for curved and helical stair runs. Shop-laminated requirements are quoted from field measurements.
Special orderStandard · Special-pitch · Mortised
Custom lead time · confirmed at quote
Four decisions narrow the catalog quickly: run geometry, baluster connection, profile scale, and material.
Use standard or plowed rail for straight runs. Use a matched bending system when the rail must follow a radius.
Standard rail supports conventional top-mount conditions. Plowed rail receives square wood balusters and matching fillet.
Compare the 6010 and 6210 for conventional work; use the 6710 where the stair and newel scale call for a wider rail.
Confirm species, total footage, joint locations, and available 8′–20′ lengths before material release.
Complete supplier inventory · 116 catalog SKUs across three rail systems
Filter the complete inventory by rail system, then confirm the UWP SKU, species, required lengths, and timing at quote.
All 9 stocked profiles. Filter to narrow the set.
Solid hardwood handrail in listed profiles, special order. 6010 is the dominant Colonial profile; 6210 the alternate; 6710 the wider stock. -O is oak, -WO white oak, -M maple, -P poplar, -H hemlock; SC and FJ1 are the solid-cap and finger-joint white oak builds.
2-1/4" wide · standard top profile · 16 variants
The dominant Colonial handrail profile — oak, maple, poplar, white oak and hemlock.
| UWP SKU | CSD # |
|---|---|
| UW-6010-08-O | 4617216 |
| UW-6010-10-O | 4617217 |
| UW-6010-12-O | 4617218 |
| UW-6010-14-O | 4617219 |
| UW-6010-16-O | 4617220 |
| UW-6010-20-O | 4600938 |
| UW-6010-12-M | 4614728 |
| UW-6010-16-M | 4614730 |
| UW-6010-16-P | 4614764 |
| UW-6010SC-08-WO | 4612735 |
| UW-6010SC-12-WO | 4612739 |
| UW-6010FJ1-WO | 4612132 |
| UW-6010-08-H | 4614702 |
| UW-6010-12-H | 4614704 |
| UW-6010-16-H | 4614706 |
| UW-6010FJ1-O | 4612117 |
2-5/8" wide · 11 variants
6210 profile alongside 6010 — oak, maple and white oak.
| UWP SKU | CSD # |
|---|---|
| UW-6210-08-O | 4002305 |
| UW-6210-10-O | 4617221 |
| UW-6210-12-O | 4617222 |
| UW-6210-16-O | 4617223 |
| UW-6210-20-O | 4617224 |
| UW-6210-16-M | 4614971 |
| UW-6210SC-08-WO | 4612852 |
| UW-6210SC-10-WO | 4612854 |
| UW-6210SC-12-WO | 4612856 |
| UW-6210FJ114-WO | 4612187 |
| UW-6210FJ1-WO | 4612190 |
2-3/4" wide · 5 variants
Wider 6710 profile for larger-scale stairs.
| UWP SKU | CSD # |
|---|---|
| UW-6710-08-O | 4002695 |
| UW-6710-10-O | 4612029 |
| UW-6710-12-O | 4612030 |
| UW-6710-16-O | 4612031 |
| UW-6710-20-O | 4003497 |
various · 29 variants
Flat-top and specialty heads, in oak, white oak and hemlock.
| UWP SKU | CSD # |
|---|---|
| UW-6004-16-H | 4614621 |
| UW-6519-16-O | 4615149 |
| UW-6002-08-O | 4002729 |
| UW-6002-10-O | 4620454 |
| UW-6002-16-O | 4620456 |
| UW-H6002-16 | 1042366 |
| UW-H6002-18 | 1042367 |
| UW-6002C-08-O | 4614557 |
| UW-6002C-10-O | 4614559 |
| UW-6002C-12-O | 4614561 |
| UW-6002C-14-O | 4614563 |
| UW-6002C-16-O | 4614565 |
| UW-6002C-08-WO | 4614597 |
| UW-6002C-10-WO | 4614599 |
| UW-6002C-12-WO | 4614601 |
| UW-6002C-14-WO | 4614602 |
| UW-6002C-16-WO | 4614604 |
| UW-684-08-O | 4614292 |
| UW-684-10-O | 4614293 |
| UW-684-12-O | 4614294 |
| UW-684-14-O | 4614295 |
| UW-684-16-O | 4614296 |
| UW-684-20-O | 4614298 |
| UW-684-08-WO | 4614309 |
| UW-684-10-WO | 4614310 |
| UW-684-12-WO | 4614311 |
| UW-684-14-WO | 4614312 |
| UW-684-16-WO | 4614313 |
| UW-684-20-WO | 4614315 |
Plowed handrail has a routed groove on the underside to accept square wood balusters. The 6040 and 6042 sections are wall rail — round and oval grips bracket-mounted to the wall.
plowed · 13 variants
The 6010 and 6210 profiles with an underside plow, finger-joint construction.
| UWP SKU | CSD # |
|---|---|
| UW-6010P/6000F-08-O | 4615887 |
| UW-6010P/6000F-12-O | 4615891 |
| UW-6010P/6000F-16-O | 4615895 |
| UW-6210P/6007-16-O | 4616132 |
| UW-6210P0/6000F-16-O | 4616160 |
| UW-6210P2/6007-08-O | 4003390 |
| UW-6210P2/6007-16-O | 4003392 |
| UW-6210PSC/6007-12-WO | 4613328 |
| UW-6210PFJ1/6007-WO | 4612351 |
| UW-6210PS0/6000F-08-WO | 4613336 |
| UW-6210PS0/6000F-12-WO | 4613338 |
| UW-6210P0FJ1/6000F-WO | 4618636 |
| UW-6210P2FJ1/6007-WO | 4003454 |
round and oval grips on a flat base · 20 variants
Bracket-mounted wall rail rather than baluster-carried stair rail.
| UWP SKU | CSD # |
|---|---|
| UW-6040-08-O | 4000724 |
| UW-6040-10-O | 4601301 |
| UW-6040-12-O | 4601306 |
| UW-6040-14-O | 4002512 |
| UW-6040-16-O | 4601318 |
| UW-6040-20-O | 4601323 |
| UW-6040-12-M | 4601278 |
| UW-6040-16-M | 4601283 |
| UW-H6040-8 | 1039289 |
| UW-H6040-10 | 1042386 |
| UW-H6040-12 | 1039285 |
| UW-H6040-16 | 1039287 |
| UW-H6040-20 | 1039288 |
| UW-6042-08-O | 4601509 |
| UW-6042-12-O | 4601518 |
| UW-6042-16-O | 4601529 |
| UW-6042-08-WO | 4601587 |
| UW-6042-12-WO | 4601594 |
| UW-6042-16-WO | 4601603 |
| UW-6042-16-H | 4601448 |
Bending rail for curved stair runs — laminated stock cut to follow the radius of curved or helical stairs. BSP is the super radial bending rail; BM is bending mould. Shop-laminated curves are quoted from field measurements with timing confirmed at quote.
matches the standard profiles · 17 variants
Bending versions of the main handrail profiles, oak and white oak.
| UWP SKU | CSD # |
|---|---|
| UW-6010B-12 | 1042404 |
| UW-6010B-16 | 1042405 |
| UW-6010B-20 | 1032970 |
| UW-WO6010B-16 | 1043559 |
| UW-N6210B-16 | 1042421 |
| UW-WON6210B-16 | 1042427 |
| UW-6710B-12 | 1042408 |
| UW-6710B-16 | 1042409 |
| UW-6003B-12 | 1042900 |
| UW-6003B-16 | 1042901 |
| UW-6003B-20 | 1042902 |
| UW-684B-12 | 1042903 |
| UW-684B-16 | 1042904 |
| UW-684B-20 | 1042905 |
| UW-6010BM | 4200136 |
| UW-N6210BM | 1037138 |
| UW-6710BM | 1034324 |
matched profiles · 7 variants
Super radial bending rail for tight curves; bending mould to trim the curved run.
| UWP SKU | CSD # |
|---|---|
| UW-6010BSP-8 | 1032981 |
| UW-6010BSP-20 | 1032980 |
| UW-N6210BSP-20 | 1037140 |
| UW-6710BSP-20 | 1034326 |
| UW-6010BM | 4200136 |
| UW-N6210BM | 1037138 |
| UW-6710BM | 1034324 |
2-1/4" × 1-1/4" · 1 variant
Hemlock shoe rail for plowed baluster systems.
| UWP SKU | CSD # |
|---|---|
| UW-6045-12-H | 4600373 |
Rail sections, dimensions, species, and listed variants
Standard, plowed, wall, bending, and specialty rail inventory
Standard · Plowed · Wall · Bending
Six standard lengths on featured profiles
Send the profile, species, required lengths, and stair condition. Our team will confirm timing and quote custom-milled or bending requirements.
The IRC requires stair handrail height between 34 and 38 inches above the nosings — measured straight up from the front edge of each tread. Most installers land at 36 inches as a comfort default. Taller homes or households with taller users can go to 38; shorter occupants and accessibility-focused installs sometimes go to 34. Pick the height first, then size the grip profile to match the user’s hand.
Read the answer →The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →