Skip to main content
Unique Wood Products

Spec drawing

UW-5015
UW-5015 5015 Turned Wood Baluster in Red Oak — turned profile with dimensions.

5015 — Classic Colonial turned profile · 1-1/4" base diameter

Wood Balusters · Turned & Square

UW-50155015 Turned Wood Baluster

Classic Colonial turned profile

Order # 4501806

A classic turned wood baluster in red oak — the 5015 profile is one of UWP's most-specified Colonial turned profiles. Sits between a turned newel above and the tread below; the turned profile reads cleanly against painted skirt boards and stained handrail. Offered in 34", 36", 39", and 42" lengths to fit standard residential stair pitches.

  • Red Oak, Primed
  • Classic Colonial turned profile
  • 34", 36", 39", 42"
  • Confirmed at quote
Availability & MaterialsUW-5015
Quote reviewedCore catalog item · confirm current availability
Red Oak
4 lengths · 34"–42"
CodeUW-5015
Choose wood species

Red Oak grain reads cleanly against stained handrail and tread work. Special order, timing confirmed at quote.

Lengths & CSD CodesRed Oak
Office orders by CSD #
1

Choose an exact length above before adding this handrail to the Quote List.

Call for a quote · (713) 462-5045 · Tanner Rd Yard Download spec sheet (PDF)

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-5015
Species
Red Oak
Material
Solid hardwood
Family
Wood Balusters
Profile
Classic Colonial turned profile · 1-1/4" base diameter
Lengths
34" · 36" · 39" · 42"
Mounting
Dowel into tread mortise; top into plowed-rail or pin-top newel
Pairs with
UW-6010 standard handrail, UW-6010P plowed handrail
Use
Interior wood-stair balustrade · Colonial / traditional
Lead time
Confirmed at quote
Minimum order
1 piece
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-5015

5015 Turned as the field baluster on traditional wood-rail stairs.

5015 Turned Wood Baluster — classic colonial turned profile · 1-1/4" base diameter. Use it according to the IRC spacing rule: maximum 4" between balusters on residential stairs. Field-cut the dowel or square top to fit your handrail.

  • Colonial / traditional stairs

    The 5000-series turned profiles are the dominant Colonial baluster family. Use UW-5015 as the field baluster with matching pin-top newels.

  • Mixed turned + plain runs

    For lighter visual rhythm, alternate UW-5015 with a plainer baluster. Common pattern: every third or fourth position uses a simpler turned profile.

  • Code-compliant infill

    IRC R312 limits sphere passage to 4" — spaced correctly, UW-5015 satisfies the residential guardrail code.

  • Replacement layouts

    When retrofitting an older traditional stair, UW-5015 is a direct match to the 5000-series legacy profiles installed in mid-century homes.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • Profile drawing
    UW-6010

    6010 Standard Handrail

    The dominant Colonial handrail profile — pair with this baluster on a traditional wood-baluster system.

    View part →
  • Profile drawing
    UW-6010P

    6010 Plowed Handrail

    Plowed (underside-grooved) handrail for the 5060/5360 square baluster systems.

    View part →
Frequently asked

What contractors actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

01What is the maximum baluster spacing?

IRC R312 caps the spacing so a 4" sphere cannot pass between balusters. For UW-5015 balusters spaced on standard 5" centers, this constraint is satisfied at typical baluster diameters.

02How is UW-5015 installed?

Bottom dowels into a 1/2" mortise drilled in the tread; top fits into the plowed handrail groove (if plowed) or pin-top newel. Glue with a small dab of polyurethane adhesive — wood movement is real.

03What species can UW-5015 be ordered in?

Red Oak — special order, timing confirmed at quote. Custom species — white oak, maple, hickory, walnut, primed poplar — milled to order with timing confirmed at quote. Specify species at quote time.

04What is the lead time?

Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

05Do you show pricing here?

Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

All answers →

Terms used on this page