
Left Hand Volute
Detail: The signature spiral starting fitting of Colonial and Federal grand stairs
View Left Hand Volute →
33 featured fittings · 69 catalog SKUs · 7000-series matched to the 6010 / 6210 / 6710 rails
Volutes, easings, opening caps, goosenecks, quarter-turns, and returns. Match the fitting profile to the handrail profile — UW-70XX matches the 6010 standard rail, UW-72XX the 6210, UW-77XX the 6710, and 784QTR the 684. A -WO suffix is white oak.
Pick the handrail you're building — its matching fittings appear below. Most 7000-series fittings serve the 6010 / 6210 / 6710 heads; the S-6040 set is the slim low-profile family.
The decorative spiral starting fitting at the open side of Colonial and Federal stairs. LH/RH variants in standard and quick-rise styles.

Detail: The signature spiral starting fitting of Colonial and Federal grand stairs
View Left Hand Volute →
Detail: LH volute with accelerated rise · for volute newels closer to the starting tread
View Left Hand Volute Quick Rise →
Detail: RH mirror complement to the LH volute · for right-handed stair runs
View Right Hand Volute →
Detail: Right-hand spiral starting fitting that climbs to rail height faster than a standard volute
View Right Hand Volute Quick Rise →Craftsman-era starting fittings that flare the rail to a turned terminus in place of a starting newel. Full 3″/5″ × LH/RH matrix.

Detail: Decorative LH starting fitting · flares the rail to a turned terminus in place of a starting newel
View 5" Left Hand Turnout →
Detail: Compact LH turnout · tighter spiral than UW-7040 for narrow openings or contemporary stairs
View 3" Left Hand Turnout →
Detail: RH mirror of UW-7040 · Craftsman starting end for non-volute open RH stairs
View 5" Right Hand Turnout →
Detail: Compact RH turnout · 3" rise · RH mirror of UW-7041 · for narrow openings or retrofits
View 3" Right Hand Turnout →Curved transition fittings — rake-to-level at stair bottoms, up-and-over at landings, combined easing + return ends, plus the slim S-6040 low-profile family.

Detail: Curved rake-to-level transition · used in pairs at the top and bottom of the rake run
View 60° Up Easing →
Detail: Up-and-over rake-to-landing transition · for over-the-post stair systems
View Over Easing →
Detail: Rake-to-vertical transition · terminates the rake rail into a vertical newel face
View 90° Up Easing →
Detail: Combined over-easing + return end at stair tops — for landings where the rail terminates at a wall
View Over Easing Return End →
Detail: Rake-to-level transition at stair bottoms · pairs with UW-7013 over-easing for OTP systems
View Starting Easing →
Detail: Over-easing sized for the slim S-6040 low-profile rail · completes the contemporary fitting set
View Over Easing (Low Profile · S-6040) →Vertical-rise turn fittings that link a stair rake to an upper landing rail across 2-riser landings. Compact / extended / non-handed straight, with or without cap.

Detail: Vertical-rise turn fitting with integrated cap · for standard 2-step landings on RH runs
View Right Hand 2-Riser Gooseneck with Cap →
Detail: LH gooseneck without a cap · rail continues onto landing rail without a decorative cap
View Left Hand 2-Riser Gooseneck (No Cap) →
Detail: RH mirror of the 7071 · for right-handed stair runs · contemporary clean line
View Right Hand 2-Riser Gooseneck (No Cap) →
Detail: LH gooseneck with integrated cap · most-common LH variant for standard 2-step landings
View Left Hand 2-Riser Gooseneck with Cap →
Detail: RH match to the 7081 · pair both for stairs that turn 180° between flights
View Right Hand 2-Riser Gooseneck with Cap →
Detail: Shorter alternative to UW-7071 · for shallower landings or contained vertical profile
View LH 2-Riser Gooseneck No Cap (Compact) →
Detail: Shorter alternative to UW-7076 · RH mirror of UW-7050 · for contemporary stairs
View RH 2-Riser Gooseneck No Cap (Compact) →
Detail: Non-handed, no-cap 2-riser · the cleanest of the 2-riser variants · for contemporary stairs
View 2-Riser Gooseneck No Cap (Straight) →
Detail: LH mirror of UW-7065 · compact alternative to extended UW-7081 · 2R landings on LH stairs
View LH 2-Riser Gooseneck with Cap (Compact) →
Detail: Twin-bump cap variant · for stairs linking to formal balcony rails at the upper landing
View 2-Riser Gooseneck with Tandem Cap →90° and 135° horizontal turn fittings plus S-curve lateral offsets. Includes cap variants and the low-profile S-6040 quarter-turn.

Detail: Horizontal 90° turn for level rail at balcony returns, intermediate landings, and level runs
View Level Quarter Turn →
Detail: S-curve lateral offset · steps the rail sideways to clear a newel, header, or wall return
View Left Hand "S" Turn →
Detail: RH mirror of UW-7047 · pair both for symmetric S-offset stair situations
View Right Hand "S" Turn →
Detail: Cap-bearing variant of UW-7011 · for balcony corners and wall returns terminating at a finial
View 90° Quarter Turn Cap →
Detail: 90° turn for the slim low-profile S-6040 rail family · contemporary, Shaker, craftsman-modern
View Quarter Turn (Low Profile · S-6040) →
Detail: Turns the rail over a newel at a 45° corner, with an integrated cap
View 135° Turn with Cap →Compact return-end fittings that bring the handrail back to the wall at the top or bottom of a stair run.

Detail: Compact return-end · brings the handrail back to the wall at the top or bottom of a run
View 4" Return End →Terminal caps for wall-side rail terminations — small opening cap and the twin-bump tandem cap for formal balconies.

Detail: Decorative terminal cap for wall ends · cleaner stop than a return easing · pairs with rosettes
View Opening Cap →
Detail: Twin-bump terminal cap for balcony rails and level runs · signature formal traditional detail
View Tandem Cap →Complete catalog · 69 SKUs across volutes, easings, goosenecks, opening caps, and turn fittings
Below is the full tabular catalog of every fitting in the 7000-series. The featured fittings above have dedicated product pages with profile-matching guidance; the rest are special order through the Tanner Rd yard, quoted on request.
The fittings that ease the rake rail into level runs, cap it over a newel, and turn it on a landing. Match the number to the rail: UW-70XX for the 6010, UW-72XX for the 6210, UW-77XX for the 6710.
matches handrail profile · 14 variants
Starting, over, 60° and 90° up-easings, plus the return end and over-easing return end.
| UWP SKU | CSD # |
|---|---|
| UW-7709-O | 4004485 |
| UW-7010-O | 4703321 |
| UW-7210-O | 4703346 |
| UW-7012-O | 4704116 |
| UW-7212-O | 4704143 |
| UW-7012-WO | 4704122 |
| UW-7013-O | 4702078 |
| UW-7213-O | 4702097 |
| UW-7713-O | 4004483 |
| UW-7014-O | 4704378 |
| UW-7214-O | 4704392 |
| UW-7714-O | 4004489 |
| UW-7216-O | 4703579 |
| UW-7716-O | 4004487 |
matches handrail profile · 6 variants
Caps that set the rail over a newel post — single opening cap or tandem cap.
| UWP SKU | CSD # |
|---|---|
| UW-7019-O | 4701844 |
| UW-7219-O | 4701864 |
| UW-7719-O | 4004482 |
| UW-7020-O | 4703682 |
| UW-7220-O | 4703697 |
| UW-7720-O | 4004488 |
matches handrail profile · 9 variants
Level quarter turns, 90° quarter-turn caps and the 135° turn with cap.
| UWP SKU | CSD # |
|---|---|
| UW-7011-O | 4702573 |
| UW-7211-O | 4702624 |
| UW-784QTR-O | 4701715 |
| UW-7711-O | 4004484 |
| UW-784QTR-WO | 4701718 |
| UW-7021-O | 4702597 |
| UW-7221-O | 4702641 |
| UW-7021-WO | 4702602 |
| UW-7021-125-O | 4702252 |
The starting fittings at the open end of a stair — volutes that spiral over a volute newel, and turnouts that swing the rail out over a starting step.
matches handrail profile · 10 variants
Left- and right-hand volutes, including the quick-rise versions.
| UWP SKU | CSD # |
|---|---|
| UW-7030-O | 4704779 |
| UW-7230-O | 4704804 |
| UW-7730-O | 4004490 |
| UW-7030-WO | 4704781 |
| UW-7231-O | 4704631 |
| UW-7733 | 1035694 |
| UW-7035-O | 4704793 |
| UW-7235-O | 4704814 |
| UW-7035-WO | 4704795 |
| UW-7236-O | 4704632 |
matches handrail profile · 8 variants
3" and 5" turnouts, left and right hand, and the S-turn offsets.
| UWP SKU | CSD # |
|---|---|
| UW-7040-O | 4703871 |
| UW-7240-O | 4703885 |
| UW-7041-O | 4703756 |
| UW-7045-O | 4703878 |
| UW-7245-O | 4703893 |
| UW-7046-O | 4703764 |
| UW-7047-O | 4703064 |
| UW-7048-O | 4703078 |
Two-riser goosenecks that lift the rake rail to a landing rail, with or without a cap, and the fittings for the 6040 low-profile rail.
matches handrail profile · 20 variants
Left, right and straight two-riser goosenecks, no cap, with cap or with tandem cap.
| UWP SKU | CSD # |
|---|---|
| UW-7050-O | 4701126 |
| UW-7055-O | 4701132 |
| UW-7060-O | 4701138 |
| UW-7065-O | 4701148 |
| UW-7265-O | 4701284 |
| UW-7765-O | 4004479 |
| UW-7071-O | 4701159 |
| UW-7076-O | 4701172 |
| UW-7276-O | 4701303 |
| UW-7776-O | 4004480 |
| UW-7081-O | 4701181 |
| UW-7081-WO | 4701183 |
| UW-7086-O | 4701192 |
| UW-7786-O | 4004491 |
| UW-7088-2-O | 4701203 |
| UW-7288-2-O | 4701335 |
| UW-7099-O | 4701239 |
| UW-7299-O | 4701366 |
| UW-7799-O | 4004481 |
| UW-7099-WO | 4701243 |
6040 rail · 2 variants
Quarter turn and over easing sized for the 6040 rail.
| UWP SKU | CSD # |
|---|---|
| UW-7023-O | 4702212 |
| UW-7025-O | 4701955 |
The IRC requires stair handrail height between 34 and 38 inches above the nosings — measured straight up from the front edge of each tread. Most installers land at 36 inches as a comfort default. Taller homes or households with taller users can go to 38; shorter occupants and accessibility-focused installs sometimes go to 34. Pick the height first, then size the grip profile to match the user’s hand.
Read the answer →A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →Find a Houston stair installer by asking your hardwood supplier for referrals, checking specific experience with the product family you’re installing (retro-fit, full-build, curved), and confirming licensing, insurance, and finished references. Avoid installers who don’t mention acclimation, can’t explain the skirt-board math, or quote without seeing the stair in person. Ask for 3 finished-stair references in the species and product you’re installing.
Read the answer →