Skip to main content
Unique Wood Products

Milled section

UW9621
UW9621 — isometric render of the milled section.

Species

Shown as an indication of colour, not a figure sample. Grain and colour vary board to board. Milled to order — other species on request.

Section drawing
UW9621 — dimensioned profile cross-section.

Dimensioned section — 2½" × 1¾"

Handrails · UWP Original Profile

UW9621UW9621

2½" × 1¾" · Squared cap

Modern squared cap handrail, 2½" × 1¾". Flat back, no plough. Meets IRC R311.7.8.3 as Type II. Milled to order in Red Oak, White Oak, Hickory, Maple or Walnut — a UWP Original profile, cut on our own knives at the Tanner Rd mill.

  • 2½" × 1¾" · Squared cap
  • 2½" × 1¾"
  • IRC R311.7.8.3 Type II · 7.782" perimeter
  • Confirmed at quote
Availability & MaterialsUW9621
Quote reviewedMilled to order · lead time confirmed at quote
Red Oak
By request
By requestCode & CSD at quote
Choose wood species

Red Oak — milled to order on this profile. Custom run, sold by the linear foot in random lengths.

By request · Red Oak isn't printed as a catalog SKU on this profile — the code and CSD # are confirmed at quote.

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW9621
Species
Red Oak
Material
Solid hardwood, milled to order
Family
Handrails
Profile
2½" × 1¾" · Squared cap
Use
Interior wood-stair handrail · Modern
Code
IRC R311.7.8.3 Type II · 7.782" perimeter
Mounting
Flat back, no plough — top-mount
Lead time
Confirmed at quote
Sold by
The linear foot, random lengths — custom run
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW9621

UW9621 as a UWP Original profile, milled on our own knives.

UW9621 — 2½" × 1¾". A broad flat cap over an undercut shoulder, on a body that narrows slightly to the foot. The squarest section in the family and the shallowest that is still a graspable rail — the cap gives the palm somewhere flat to sit while the undercut is what the fingers actually hook.

  • Custom and architectural stairs

    A UWP Original section rather than a catalogue part — specify it where the stair deserves a profile the next house down the street will not have.

  • Code-driven work

    Dimensioned to clear IRC R311.7.8.3 as Type II with margin, rather than sitting on the minimum — so a knife reground a few thousandths shallow still leaves a compliant rail.

  • Matching an existing rail

    If none of these is the profile you need, that is what the knife-matching program is for. Send an offcut and we cut to it.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • Profile drawing
    Custom

    Knife matching

    Send a sample or an offcut and we grind to it — the capability this whole family came out of.

    View part →
  • Profile drawing
    UW-6006

    6006 Fillet

    For ploughed-rail systems — this profile ships unploughed.

    View part →
  • Profile drawing
    Stair Parts

    Newels and balusters

    Matched newels, balusters and fittings to run beneath this rail.

    View part →
Frequently asked

What contractors actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

01Does this profile meet handrail code?

Yes. Measured against IRC R311.7.8.3 it qualifies as Type II — 7.782" perimeter, 2.5" maximum cross-section. We dimension our own profiles to clear the rule with margin rather than sit on the minimum. Always confirm against the code edition your jurisdiction has adopted.

02What species can this be ordered in?

Red Oak, White Oak, Hickory, Maple and Walnut — the same five we run the moulding program in. Other species are available; ask when you quote.

03Is this a stock item?

No. Every UWP Original profile is a custom run, milled to order on our own knives and sold by the linear foot in random lengths. Nothing in this family is carried on the shelf.

04What is the lead time?

Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

05Can you match a rail I already have?

That is the whole point of the program. We grind knives to match an existing profile — send a sample, an offcut, or a measured section and we will cut to it. It is the same capability these profiles came out of.

06Do you show pricing here?

Not on this reference page. Custom runs are quoted on species, footage and profile. Call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

All answers →