Skip to main content
Unique Wood Products

Product photo

UW-684B
UW-684B 684 Bending Handrail.

UW-684B — 684 profile · laminated bending rail

Handrails · Bending

UW-684B684 Bending Handrail

684 profile · laminated bending rail

Order # 1042903

The 684 profile as laminated bending rail for curved stairs, in white oak, 12′, 16′ and 20′.

  • 684 profile · laminated bending rail
  • 2-5/8" × 1-5/8"
  • 12′ · 16′ · 20′
  • Confirmed at quote
Availability & MaterialsUW-684B
Quote reviewedMilled to order · lead time confirmed at quote
White Oak
3 lengths · 12′–20′
CodeUW-684B-12
Choose wood species

White Oak — tighter grain, cooler tone. Special order, timing confirmed at quote.

Lengths & CSD CodesWhite Oak
Office orders by CSD #
1

Choose an exact length above before adding this handrail to the Quote List.

Call for a quote · (713) 462-5045 · Tanner Rd Yard Download spec sheet (PDF)

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-684B
Species
White Oak
Material
Solid hardwood
Family
Handrails
Profile
684 profile · laminated bending rail
Section
2-5/8" × 1-5/8" · 12′ · 16′ · 20′
Installation
Top-mount on newels and balusters; rail-bolted at the newel
Pairs with
See compatible products below
Use
Interior stair and balcony rail
Lead time
Confirmed at quote
Minimum
1 piece
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-684B

684 Bending Handrail in your stair package.

The 684 profile as laminated bending rail for curved stairs, in white oak, 12′, 16′ and 20′.

  • Stair and balcony runs

    Carries the rail over balusters between newels.

  • Matched fittings

    Use fittings in the same profile family so every joint lines up.

  • Long runs

    Order the longest length that suits the run to keep joints to a minimum.

  • Graspability

    Check the profile against the IRC handrail graspability rule (R311.7.8.5).

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • Profile drawing
    UW-684

    684 Handrail

    The straight rail in the same profile.

    View part →
Frequently asked

What contractors actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

01What is UW-684B cataloged in?

White Oak, in 12′ · 16′ · 20′. Each line has its own order number — read it from the table on this page.

02What is the lead time?

Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

03Do you show pricing here?

Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

All answers →