Moulding & trim
Apron
Also called window apron
The trim run horizontally under a window stool, closing the wall beneath the sill.
The apron sits directly under the stool and covers the joint where the wall meets the underside of the sill. It is usually the same profile as the casing, run upside down, so the window reads as one assembly rather than three.
Length is taken from the outside of the casing legs, not the width of the stool: an apron that stops short of the casing leaves a step that catches the eye every time.
The ends are returned — mitred back on themselves — so the profile finishes rather than showing an open cut against the wall.
On this site
Questions that use this term
See also
More in moulding & trim
Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.

