Moulding & trim
Board and batten
A wall treatment of wide flat boards with narrow battens covering the joints between them.
The batten is doing real work: it covers the joint between boards and allows each board to move seasonally behind it. In interior wainscoting the boards are often the wall surface itself, with only the battens applied.
Spacing of the battens is the design decision, and it should be set out from the centre of the wall or from an architectural feature rather than started at one corner.
See also
More in moulding & trim
Part of the UWP millwork glossary. Milled at the Tanner Rd mill, NW Houston.

