Skip to main content
Unique Wood Products

Product photo

UW-4401
UW-4401 4401 Chamfered Newel (Primed).

UW-4401 — 3-1/4" square chamfered post

Wood Newels · Chamfered

UW-44014401 Chamfered Newel (Primed)

3-1/4" square chamfered post

Order # 4401022

A 3-1/4" square chamfered newel, factory primed, 58" long — a paint-grade contemporary post.

  • 3-1/4" square chamfered post
  • 3-1/4" square
  • 58"
  • Confirmed at quote
Availability & MaterialsUW-4401
Quote reviewedMilled to order · lead time confirmed at quote
Primed
58"
CodeUW-4401-PRG
Choose wood species

Primed — factory-primed, ready for paint. Special order, timing confirmed at quote.

Lengths & CSD CodesPrimed
Office orders by CSD #

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-4401
Species
Primed
Material
Solid wood, factory primed
Family
Wood Newels
Profile
3-1/4" square chamfered post
Size
3-1/4" square · 58"
Installation
Bolt-down to subfloor or first tread; cut to fit on install
Pairs with
See compatible products below
Use
Anchor post at stair starts, landings and balcony returns
Lead time
Confirmed at quote
Minimum
1 piece
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-4401

4401 Chamfered Newel (Primed) in your stair package.

A 3-1/4" square chamfered newel, factory primed, 58" long — a paint-grade contemporary post.

  • Stair starts and landings

    The anchor post where the handrail starts, turns or ends.

  • Matched families

    Pair a starting newel with the matching landing newel so the stair reads as one system.

  • Code-compliant anchor

    Bolt-down install resists the 200 lb concentrated load the IRC requires of the rail system.

  • Species choice

    Order the species that matches the handrail and treads.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

  • Profile drawing
    UW-3009

    Bracket Newel Fastener

    Anchors the newel to the floor framing.

    View part →
  • Profile drawing
    UW-3005

    Keylock Newel Fastener

    Alternative newel anchor.

    View part →
Frequently asked

What contractors actually ask.

Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

01What is UW-4401 cataloged in?

Primed, in 58". Each line has its own order number — read it from the table on this page.

02What is the lead time?

Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

03Do you show pricing here?

Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

All answers →