Skip to main content
Unique Wood Products

Spec drawing

UW-7023
UW-7023 Quarter Turn (Low Profile · 6040) — fitting silhouette.

7023 — 90° horizontal turn · 6040 low profile

Handrail Fittings · Turns

UW-7023Quarter Turn (Low Profile · 6040)

Horizontal 90° turn · low-profile · 6040 rail

Order # 4702212

Quarter-turn fitting for the low-profile 6040 handrail family — a smaller, rounder profile than the dominant 6010 series. Used on contemporary, Shaker, and craftsman-modern stairs where a slimmer rail section is preferred over the traditional Colonial profiles. Matches the 6040 round-over rail.

  • Turn
  • Horizontal 90° turn · low-profile · 6040 rail
  • Matches 6040 low-profile handrail only
  • Confirmed at quote
Availability & MaterialsUW-7023
Quote reviewedCore catalog item · confirm current availability
Red Oak
1 profile
CodeUW-7023-O
Choose wood species

Red Oak — the default species for fittings. Grain reads cleanly under stain or clear finish; special order, timing confirmed at quote.

Profiles & CSD CodesRed Oak
Office orders by CSD #

Don't see your species or want to match an existing profile? Our mill custom-runs to spec — send a sketch or a sample stick. Compare wood species →

Specifications

The full spec sheet. For the contractor who scrolled this far.

SKU
UW-7023
Species
Red Oak
Material
Solid hardwood
Family
Handrail Fittings
Profile
Horizontal 90° turn · low-profile · 6040 rail
Matches profiles
6040 (UW-7023-O) — single low-profile family
Mounting
Rail-bolt or hand-joined to adjacent rail / newel. Set with a small dab of polyurethane adhesive for grain expansion tolerance.
Use
Interior wood-stair fitting · Turns family
Lead time
Confirmed at quote
Minimum
1 piece
Warranty
See Stair Parts warranty
Custom runs
Custom species, lengths, and match-to-existing profiles available — send a sketch or a sample stick.
Start a custom run
Why the UW-7023

Quarter Turn as the turn fitting in your wood-rail system.

Quarter Turn (Low Profile · 6040) — Horizontal 90° turn · low-profile · 6040 rail. Match the fitting to your handrail profile family so the joint reads as one continuous run. Field-cut to length if needed; rail-bolted or hand-joined to the adjacent rail/newel.

  • Wood-rail systems

    Pair this turn with matched 6000-series handrail and 4000-series pin-top newels for a coherent traditional language.

  • Profile-family matching

    Choose the variant that matches your handrail profile: 6040 (UW-7023-O) — single low-profile family. Mixing profile families across a single run reads as wrong even to non-stair-trained eyes.

  • Custom species

    Red Oak ship on a quote-reviewed special order; Maple, Poplar, and other species milled to order with timing confirmed at quote. Specify species at quote time.

  • Joinery

    Most installers rail-bolt the fitting to the adjacent rail. UWP supplies the standard 3/8" rail-bolt kit; coordinate with the Tanner Rd yard if you need an alternate joinery system.

The House Species

Six woods, chosen for tone first.

A staircase or a run of trim reads best when it matches the floor and the room it meets. Hardness keeps it wearing; tone is what makes it disappear into the space instead of fighting it. Here is how the six compare. Images simulate a water-clear matte coat to reveal natural species color. UWP material ships unfinished; tone and figure vary by board.

Representative Poplar wood grain under a clear matte finish

Poplar

Paint-Grade · Most Popular
Janka Hardness540 lbf

Tone — Pale cream to tan, often with soft green or grey streaks that vanish under paint.

Grain — Straight, fine, and uniform — minimal figure, sands glass-smooth.

Best for — Our highest-volume species. The value choice for painted trim, casing, and built-ins — a lower-cost paint-grade hardwood for any profile finished in color, not stain.

Representative Walnut wood grain under a clear matte finish

Walnut

Dark & Refined
Janka Hardness1,010 lbf

Tone — Deep chocolate-brown heartwood; warm, luxurious, and refined.

Grain — Fine-to-medium grain — smooth, even, and elegant.

Best for — Dark, high-end interiors, feature stairs, and countertops where a rich tone is the statement.

Representative Red Oak wood grain under a clear matte finish

Red Oak

Standard
Janka Hardness1,290 lbf

Tone — Light-to-medium brown with a reddish cast; stains slightly pink.

Grain — Bold, prominent grain lines with occasional swirl.

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

Representative White Oak wood grain under a clear matte finish

White Oak

Cool-Toned
Janka Hardness1,350 lbf

Tone — Light-to-medium brown with an olive — not pink — cast; reads warm-tan.

Grain — Medium-to-coarse, slightly tighter and straighter than red oak.

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Also Known For — Its closed, tyloses-filled grain is why white oak is often selected for exterior details, porches, and moisture-prone areas.

Representative Hard Maple wood grain under a clear matte finish

Hard Maple

Light & Modern
Janka Hardness1,450 lbf

Tone — Creamy white to light reddish-brown; clean, bright, and modern.

Grain — Mostly straight, sometimes wavy; fine, even texture.

Best for — Pale contemporary floors, maple cabinetry, and anywhere an even near-white tone is wanted.

Representative Hickory wood grain under a clear matte finish

Hickory

Hardest
Janka Hardness1,820 lbf

Tone — Creamy lights against rich browns; rustic and striking.

Grain — Coarse, pronounced, high-contrast figure.

Best for — Rustic and character-grade floors and stairs that take hard wear and high traffic.

What ships with it

Order these together

A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.

    Frequently asked

    What contractors actually ask.

    Straight answers to the questions we field at the will-call counter — not a marketing FAQ.

    01How do I match the fitting to my handrail?

    Match the profile prefix. If your handrail is 6040, use UW-7023-O.

    02What species can UW-7023 be ordered in?

    Red Oak ship on a quote-reviewed special order. Maple, Poplar, and other species milled to order with timing confirmed at quote. Specify species at quote time.

    03How is UW-7023 installed?

    Rail-bolted to the adjacent handrail and/or newel. UWP supplies the standard 3/8" rail-bolt kit. Glue with a small dab of polyurethane adhesive — wood movement is real and a tight joint with glue beats a loose joint with screws.

    04What is the lead time?

    Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.

    05Do you show pricing here?

    Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List.

    All answers →