Skip to main content
Unique Wood Products

UW9894 Low-Slope Overlap Reducer

2" × 3/4" — milled to order at NW Houston / Tanner Rd in Red Oak, White Oak, Hickory, Maple, or ground to match an existing profile.

  • Profile data sheet
  • ANSI A shop drawing
  • DXF for CAD
Not ADA compliant

The lip rides on the finished floor, so the top stands 3/4″ above the lower floor — over the 1/2″ change in level 2010 ADA §303 lets a bevel cover. For an accessible route, use UW9903. How transitions are measured

Availability
Available to order
Lead time
Confirmed at quote
Price
Priced by the linear foot on your quoteRequest a quote
Sample
Order a sampleHold it before you order
LIVE MODEL
Material
Red Oak
Width
2"
Thickness
3/4"
Availability
Special Order

Specify this moulding

FLOORING TRANSITIONS · NW HOUSTON / TANNER RD

Red Oak · 2" × 3/4"

Low-Slope Overlap Reducer · Random Length

PROFILE

UW9894

priced by the foot on your quote

A 2″ × 3/4″ overlap reducer with a straight 1-1/4″ ramp and a 1/2″ drop under the lip. The beveled 3/4″ lip rides on a 1/2″ nominal hardwood, laminate, or engineered floor and hides its cut edge; the ramp bears on the subfloor and eases the change in level down to a 1/8″ toe. Not for an accessible route.

Material & finish

Red Oak

Colour is indicative — grain and colour vary board to board.

Special OrderRed Oak · Random Length

Dimensions

2" × 3/4"

A stocked profile runs one size off one knife. Length is a quantity, not a dimension — order by the foot.

Width
2"FIXED
Thickness
3/4"FIXED

Need this section at another width, in another species, or ground to match an existing profile? That is a custom run — send us a sample or an offcut.

Your specification

Red Oak
SKU
UW9894
Profile
Low-Slope Overlap Reducer · Flooring Transitions
Material
Red Oak
Section
2" width × 3/4" thick
Sold by
Random Length
Pairs with
Low-Slope Overlap Reducer 3/4″ drop (UW9890), Flush Bevel Reducers (UW9901–UW9903) for accessible routes, Overlap Reducer (UW9897), T-Moulding (UW9896), and matching hardwood flooring.
Finish
Unfinished — site finish by others

Order by the code above at the Tanner Rd counter. Pricing, availability and lead time are confirmed on the quote.

PROFILE

UW9894

The wood

Stocked profiles run primed for paint; in solid wood this one is milled to order, so the species is your choice rather than whatever is on the shelf. These are the five we run most for flooring transitions — pick one in the swatches above to see this profile in it.

Poplar plank

PoplarPaint-Grade · Most Popular

Janka hardness540 lbf

Best for — Our highest-volume species. The value choice for painted trim, casing and built-ins — a lower-cost paint-grade hardwood for any profile finished in colour, not stain.

Red Oak plank

Red OakStandard

Janka hardness1,290 lbf

Best for — The workhorse match for red oak floors — the most-stocked species across treads and moulding.

White Oak plank

White OakCool-Toned

Janka hardness1,350 lbf

Best for — Cooler, modern, wire-brushed and natural finishes; the premium choice for light contemporary work.

Hard Maple plank

Hard MapleLight & Modern

Janka hardness1,450 lbf

Best for — Pale contemporary work, maple cabinetry, and anywhere an even near-white tone is wanted.

Walnut plank

WalnutDark & Refined

Janka hardness1,010 lbf

Best for — Dark, high-end interiors and feature work where a rich chocolate tone is the statement.

Where low-slope overlap reducer earns its keep

  • 1/2″ floor step-down

    Reduces a 1/2″ nominal hardwood, laminate, or engineered floor down to a lower surface — the drop under the lip equals the floor thickness, so the floor edge tucks under flush.

  • Straight, gradual ramp

    A 1-1/4″ straight ramp to a 1/8″ toe instead of a domed profile — a longer, even slope underfoot and no lip to catch.

  • Floating-floor edge cover

    The 3/4″ lip rides on the finished floor and hides its cut edge; fasten the ramp body to the subfloor only so the floor can still move.

  • Doorways, hearths, and landings

    Where flooring type or height changes between spaces and a clean milled hardwood edge is wanted — off an accessible route. For one, see the Flush Bevel Reducers (UW9901–UW9903).

What contractors actually ask

Is it ADA compliant?
No. The lip rides on top of the finished floor, so the top of UW9894 stands its full 3/4″ above the lower floor — more than the 1/2″ change in level that 2010 ADA §303 lets a bevel cover. On an accessible route, use a Flush Bevel Reducer: UW9901, UW9902, or UW9903 for a 1/4″, 3/8″, or 1/2″ difference between the floors.
How is this different from the Overlap Reducer (UW9897)?
UW9897 is a domed 1-3/4″ profile. The Low-Slope Overlap Reducer is a wider 2″ profile with a straight 1-1/4″ ramp that runs down to a 1/8″ toe — a longer, more even slope — and a 3/4″ lip with a beveled nose. UW9894 is the 3/4″ × 2″ version for a 1/2″ drop.
Which size do I need?
Match the drop to the floor being reduced: the clearance under the lip equals the nominal floor thickness. UW9894 reduces a 1/2″ floor; UW9890 is the 1″ × 2″ version for a 3/4″ floor.
How is it installed?
Fasten the ramp body to the subfloor only. Leave the lip free over a floating floor so the floor can expand and contract; over a nailed or glued floor the lip may be set in adhesive.
Which patterns are available?
Red Oak, White Oak, Hickory, and Maple, milled at the Tanner Rd yard in 12′ stock. This is a new profile — call the yard for current pricing and lead time.
Is there a drawing I can send to the job?
Yes. The profile submittal PDF has a dimensioned section for each size plus a 1:1 print template; the technical spec sheet carries decimal dimensions with tolerances. Both are linked on this page.
Do you ship, or is it pickup only?
Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
All answers →