UW12509 Art Deco Wall Paneling Lap & Gap
3-1/4" x 3/4" — milled to order in Houston. Any species; ground to match an existing profile on request.
- Dimensioned section
- ANSI A shop drawing
- DXF for CAD
- Availability
- Made to order
- Lead time
- 7–14 days
- Price
- Priced by the linear foot on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
Dimensions are nominal. Milled profile is held to ±1/64″ and length to ±1/16″ — tolerances and how each is measured. Hold a sample before you commit a run.
The true section — the same closed outline that ships in the DXF.
- Profile
- Wall Paneling Lap & Gap
- Width
- 3-1/4"
- Thickness
- 3/4"
- Order code
- UW12509-325
3-1/4" × 3/4"
Wall Paneling Lap & Gap · Step · Plain
ORDER CODE
UW12509-325
quoted by the linear foot
- Step
- Square Edge
Specify this profile
Dimensions
3-1/4" × 3/4"Length is a quantity — quoted by the linear foot.
Your specification
UW12509-325- Order code
- UW12509-325
- Profile
- Art Deco Wall Paneling Lap & Gap · Wall Paneling
- Section
- 3-1/4" width × 3/4" thick
- Species
- Poplar, Maple, White Oak, Walnut — others on request
- Sold by
- Linear foot · knife on file · setup by footage
- Availability
- Milled to order · 7–14 days lead time
- Finish
- Unfinished — site finish by others
The DXF is the finished section, in inches, for drawing reference. To match an existing profile instead, send us a sample or an offcut and we will grind a knife to it. Knife, setup and shop charges are on the custom moulding price schedule.
ORDER CODE
UW12509-325quoted by the linear foot
Specification · UW12509
Art Deco Wall Paneling Lap & Gap · 3-1/4" × 3/4"
Questions people ask about wall paneling
Wainscoting styles — beadboard, shiplap, board-and-batten, raised panel. Which one for my room?
Wainscoting is wall paneling that covers the lower 30 to 48 inches of a wall. Five main styles: beadboard (narrow vertical strips with bead detail), shiplap (horizontal overlapping boards), board-and-batten (flat panels with vertical battens), flat-panel (simple recessed squares), and raised-panel (formal beveled panels). Pick on home style — beadboard for farmhouse, shiplap for coastal, raised panel for traditional formal.
Read the answer →Is a solid-wood slat wall worth it over the MDF veneer panels everyone sells?
Most slat-wall panels sold today are a thin veneer or a printed film wrapped over an MDF core, cut to a fixed import size. They look right on day one. Solid hardwood costs more and needs a mill, but it can be cut to the room, sanded, refinished, and matched to the stairs and trim already in the house.
Read the answer →What slat width and gap should I use on a wood slat wall?
Most slat walls read well with a slat face between three quarters of an inch and an inch and a half, and a gap narrower than the slat. The backer colour matters as much as the spacing: painted dark or felted, the gap reads as shadow. Left light, it reads as a stripe and the wall looks like fencing.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

