UW12503 Art Deco Flooring T&G
7-1/4" x 3/4" — milled to order in Houston. Any species; ground to match an existing profile on request.
- Dimensioned section
- ANSI A shop drawing
- DXF for CAD
- Availability
- Made to order
- Lead time
- 7–14 days
- Price
- Priced by the linear foot on your quoteRequest a quote
- Sample
- Order a sampleHold it before you order
Dimensions are nominal. Milled profile is held to ±1/64″ and length to ±1/16″ — tolerances and how each is measured. Hold a sample before you commit a run.
The true section — the same closed outline that ships in the DXF.
- Profile
- Flooring T&G
- Width
- 7-1/4"
- Thickness
- 3/4"
- Order code
- UW12503-725
7-1/4" × 3/4"
Flooring T&G · Dentil · Plain
ORDER CODE
UW12503-725
quoted by the linear foot
- Step
- Square Edge
Specify this profile
Dimensions
7-1/4" × 3/4"Length is a quantity — quoted by the linear foot.
Your specification
UW12503-725- Order code
- UW12503-725
- Profile
- Art Deco Flooring T&G · Hardwood Flooring
- Section
- 7-1/4" width × 3/4" thick
- Species
- Poplar, Maple, White Oak, Walnut — others on request
- Sold by
- Linear foot · knife on file · setup by footage
- Availability
- Milled to order · 7–14 days lead time
- Finish
- Unfinished — site finish by others
The DXF is the finished section, in inches, for drawing reference. To match an existing profile instead, send us a sample or an offcut and we will grind a knife to it. Knife, setup and shop charges are on the custom moulding price schedule.
ORDER CODE
UW12503-725quoted by the linear foot
Specification · UW12503
Art Deco Flooring T&G · 7-1/4" × 3/4"
More art deco hardwood flooring
Questions people ask about hardwood flooring
Does Houston humidity damage hardwood floors and stair treads?
Houston outdoor humidity is high year-round, but conditioned indoor humidity stays in a normal range (30%–55% RH) — the same as most US homes. Hardwood floors, stair treads, and mouldings installed in conditioned Houston interiors perform as well as anywhere else in the country. The risk isn’t the climate; it’s installing wood in an unconditioned space or skipping acclimation.
Read the answer →What are threshold and transition strips, and which one do I need?
Threshold and transition strips finish the seam where two floors of different heights or materials meet. The four main types are T-mould (same-height transition between same-thickness floors), reducer (taller floor to shorter floor), end-cap or carpet-edge (hardwood to carpet), and threshold (door opening, where two rooms meet). Pick by the floor heights you’re transitioning and what kind of doorway it is.
Read the answer →Wood species cheat sheet — red oak, white oak, hickory, hard maple, walnut, brazilian cherry
UWP mills six hardwood species: red oak, white oak, hickory, hard maple, walnut, and brazilian cherry. Red oak is the affordable warm baseline; white oak runs golden-tan and takes modern stains cleanly; hickory shows the strongest grain contrast; hard maple is the tightest, lightest grain; walnut is rich chocolate; brazilian cherry is the hardest and reddest. Pick on look first, hardness second.
Read the answer →Can you match my existing moulding profile?
Yes. UWP runs custom knives to match existing baseboards, crown, casing, and any other milled profile. Bring us a 6-inch sample piece, a clean sketch with dimensions, or even a photo with a scale reference. We grind a new knife to match, run your order, and keep the knife on file for re-orders. One-time knife fee covers the setup; per-foot pricing matches our stock catalog.
Read the answer →

