Jatoba — hardwood for stair treads and millwork
Deep reddish brown. Use when the design calls for a darker red hardwood.

2,350 lbf
Nearly double red oak, and the hardest wood on this page by a wide margin. Pre-drill everything.
214 · red oak = 100
Indicative of lumber market position — not a UWP quote.
Milled to order · lead time confirmed at quote
Milled and finished at the Tanner Rd mill, NW Houston. Every wood stair part is special order.
What we mill it into
Character
Dense, rich, and dramatic.
Nearly double red oak, and the hardest wood on this page by a wide margin. Pre-drill everything.
Best for
Premium accents and durable specialty work.
How Jatoba behaves in service
Every board moves with the seasons, and in Houston the swing from a humid summer to a heated winter is the widest a floor or a tread will see. The figures below are the published shrinkage constants; the movement calculator turns them into inches for a given width.
8.5%
Across a flatsawn face, green to oven-dry. The larger of the two and the one a wide plank follows.
4.5%
Across a quartersawn face. Rift and quartered stock moves this much, which is why it is the stable cut.
USDA Wood Handbook
Published laboratory constants for the species, not a UWP measurement.
Finishing
Deep orange-brown darkening to red under light; finished clear. Its density means a stain barely penetrates and an oil finish sits on the surface.
Machining and fastening
Very hard and heavy: it needs carbide tooling, pre-drilled fasteners and a slow feed, and it will burn. Interlocked grain tears out on the plane.
Closest in hardness
The three species nearest Jatoba on the Janka scale — the usual alternatives when a budget, a tone or a lead time rules it out.

