Spec drawing
UW-MC658PC
MC658 — Single twist section on a straight square shaft · 1/2" Sq × 44"
Iron Balusters · 1/2" Square
UW-MC658PCSingle Twist Iron Baluster
Order # 1038331
- Satin BlackView →
- Oil Rubbed BronzeView →
- Silver VeinSelected
Silver Vein gives the part a lighter, textured metal read. Use it carefully; it works when the stair package has cooler hardware, stone floors, or a deliberately lighter metal scheme.
- Order #1038331
- FinishSilver Vein
- End shape1/2" Square
- Length44"
- Lead timeConfirmed at quote
A 1/2" square iron baluster with one twist section set into a straight shaft. It is traditional without becoming heavy, which makes it one of the safest decorative field balusters for builder-grade upgrades, remodels, and stair packages with stained treads and painted risers. The single twist gives movement under light while keeping enough plain shaft for clean spacing. Use it alone for a consistent traditional run or alternate it with plain bars to reduce ornament.
Everything on one card
- FinishSilver Vein (PC)
- MaterialSolid iron
- End shape1/2" square top & bottom
- Length44"
- Center detailSingle twist section on a straight square shaft
- MountingEpoxy-set (UW-EPOXY)
- Pairs with1/2" Sq flat shoe, rake shoe
- UseInterior wood-stair balustrade
- Lead timeConfirmed at quote
- Minimum order1 piece
- WarrantySee Stair Parts warranty
Order these together
A baluster doesn't install alone. Most jobs need the epoxy plus the matching shoes for the flat run, rake, and top.
- UW-EPOXY
Baluster Epoxy
Sets the baluster into the tread and handrail mortise. One bottle sets approximately 30 balusters.
View part → - UW-ALM06-LSB
1/2" Square Flat Shoe — Low Sheen Black
Goes at the bottom of each baluster on level runs (landings, level rails).
View part → - UW-06ORB
1/2" Square Flat Shoe — Oil Rubbed Bronze
Goes at the bottom of each baluster on level runs (landings, level rails).
View part → - UW-06PC
1/2" Square Flat Shoe — Silver Vein
Goes at the bottom of each baluster on level runs (landings, level rails).
View part → - UW-ALPSH02-LSB
1/2" Square Rake Shoe — Low Sheen Black
Goes at the bottom of each baluster on the rake (stair angle).
View part → - UW-02ORB
1/2" Square Rake Shoe — Oil Rubbed Bronze
Goes at the bottom of each baluster on the rake (stair angle).
View part → - UW-02PC
1/2" Square Rake Shoe — Silver Vein
Goes at the bottom of each baluster on the rake (stair angle).
View part → - UW-M798SB
1/2" Square Adjustable Knuckle — Satin Black
Sits at the top of each baluster where it meets the underside of the handrail; adjusts to the rake.
View part →
The single-twist field baluster
for traditional stairs with restrained movement.
The Single Twist is the standard decorative iron language many homeowners recognize. It adds movement without the stronger weight of baskets, scrolls, or double-twist pieces.
Traditional remodels
A reliable upgrade from wood balusters when the home still uses classic rail, tread, and newel profiles.
Decorative field runs
Repeats cleanly through the rake without needing a separate feature baluster.
Plain-bar alternation
Alternate with M701 when the customer wants twist detail but not a fully decorative rail.
Finish-flexible projects
Offered in the broadest finish family on this page group, useful when matching existing hardware or stairs.
Answers, before you ask
- What size is this baluster?
- This shape is 1/2" square and 44 inches overall before jobsite trimming. Confirm finished rail height, tread depth, and local guard requirements before cutting.
- Which finish should I order?
- This shape ships in Satin Black, Oil Rubbed Bronze, and Silver Vein. Keep shoes and rake shoes in the same finish family so the hardware does not draw attention away from the baluster pattern.
- Can this be the only decorative baluster in the run?
- Yes. The single twist is calm enough to repeat across the field. For a lighter look, alternate it with plain square balusters in the same finish.
- How is it installed?
- Most iron balusters are trimmed to length and epoxy-set into the tread and rail. Shoes can be added at the bottom and top to cover the mortise or drilled opening.
- What is the lead time?
- Current material availability, production timing, pickup, and delivery are confirmed on the written quote after UWP reviews the exact SKU, species, quantity, geometry, and shop capacity.
- Do you show pricing here?
- Not on this reference page yet. The builder/trade pricing tier is in development — when it ships, pricing will appear after login. For an immediate quote, call the Tanner Rd yard at (713) 462-5045 or use the Quote List to send a project quote request.
Questions people ask about iron balusters
Iron vs. wood balusters — which one for my staircase?
Wood balusters read as traditional and warm; iron balusters read as transitional, modern, or industrial. Wood is easier to install, refinishable, and matches stained handrails. Iron is more durable, allows thinner profiles for a more open stair, and pairs well with mixed-material designs. Most Houston homes built since 2010 use iron; older traditional homes use wood. Mix them only if the design language supports it.
Read the answer →What are the IRC stair code rules in plain English?
The IRC residential stair code requires a minimum 10″ tread depth, a maximum 7-3/4″ riser height, a 3/4″ nosing overhang, 36″ minimum stair width, 6′8″ minimum headroom, and handrails on at least one side. Variation between any two treads on the same flight cannot exceed 3/8″. Most code violations on retrofit jobs come from changing the tread thickness without re-framing the stair.
Read the answer →How do I choose a stair newel post?
A newel post is the structural anchor at the top, bottom, and turns of a stair railing. The four main families are box newel (large rectangular, traditional), turned newel (classical with profile turning), modern square (clean tapered or straight), and craftsman (substantial square with shaker detail). Size to the stair scale (4 to 8 inches), match the baluster style, and use the same wood species as the handrail.
Read the answer →Stair terminology glossary — tread, riser, stringer, nosing, and the rest
A staircase has more named parts than most people realize. The tread is the horizontal walking surface; the riser is the vertical board between treads; the stringer is the diagonal structural framing; the nosing is the front lip of the tread; the skirt board is the trim against the wall. Below: every term, plain English, with a note on where each one matters for ordering and installation.
Read the answer →

